

Bms hardware
This is the hardware design section of the BMS project. It was designed with KiCAD.
- Size
- 150.6 × 71.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 199
- Nets
- 196
- Pads
- 786
- Tracks, vias
- 1,337, 129
- Pours
- 16
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Mar 2020
- Updated
- 1 Oct 2021
Overview
Bms hardware is an open-source printed circuit board by moyamartin, from the moyamartin/bms_hardware repository on GitHub. It is a 2-layer board of 150.6 × 71.7 mm with 199 parts on 196 nets, routed with 1,337 tracks and 129 vias.
It is built around the PDM1-S12-S3-S, ADUM1201AR and BQ76PL536APAPR, with the FERD2045SB-TR, BC848 and DMP4051LK3 among its other parts. Its parts include 68 resistors, 63 capacitors, 16 diodes, 13 transistors and 6 ICs. It belongs with the power boards of this library.
Main components
8PDM1-S12-S3-S
SIP,19.5x6mmIsolated Power ModulesCUIADUM1201AR
SOIC-8-40℃~+105℃ 1 1 150ns 1Mbps 2 2.7V~5.5V 2.7V~5.5V 2500 25kV/us Bidirectional signal isolation、Multi-voltage domain interface、Power-on reset SOIC-8 Digital IsolatorsAnalog DevicesDigital IsolatorsBQ76PL536APAPR
HTQFP-64(10x10)-40℃~+85℃ 12uA 3~6 7.2V~27V Lithium Battery Protection IC、Monitoring IC SPI Support Under-voltage lockout、Overcharge protection、Over-discharge protection、Cell balancing HTQFP-64(10x10) Battery Management ROHSTexas InstrumentsBattery ManagementFERD2045SB-TR
DPAK-40℃~+150℃ 1 Independent 180A 20A 45V 550mV@20A 600uA@45V DPAK Diodes - General Purpose ROHSSTMicroelectronicsDiodes - General PurposeBC848
SOT-23SOT-23 Bipolar (BJT) ROHSTDDBipolar (BJT)DMP4051LK3
TO-252(DPAK)-55℃~+150℃ 1 P-Channel 10.5A 115pF 3V 4.18W 40V 67.7pF 674pF 7nC 85mΩ@4.5V TO-252(DPAK) MOSFETs ROHSDiodes IncorporatedMOSFETsFDD86580-F085
DPAK(TO-252)-55℃~+175℃ 1 N-channel 1.43nF 19mΩ@10V 30nC@10V 4.2V 50A 60V 75W DPAK(TO-252) MOSFETs ROHSonsemiMOSFETsB340
SMC(DO-214AB)-55℃~+150℃ 1 Independent 100A 3A 40V 500mV@3A 500uA@40V SMC(DO-214AB) Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
README
README.mdBattery Management System (BMS) - Hardware

This is the hardware design section of the BMS project. It was designed with KiCAD.
Here you will find the design, gerber, BOM and render files of the PCB.
Features
As the main goal of this project, this board is designed to support a li-ion battery pack with a 6 series - 3 parallel architecture based on 18650PF cells following the next goals:
- Protection
- Balancing
- Charging/Discharging
- Temperature measurement
- Battery SoC (State of Charge) estimation
Design components/considerations
To meet the project's requirements we have chosen the following components with their respective role:
-
BQ76PL536A: This is a 3 to 6 series lithium-ion battery monitor and secondary protection. It is used as a frontend analog device to measure each series cell voltage and it has dedicated outputs to balance passively through resistors the desired cell.
-
INA226: Bi-Directional current and power monitor with I2C compatible interface, we are using this to measure the discharge current, fusioning this data with the voltage measurement of each cell we can infere the SoC of each cell.
-
BQ24618: 6 cells Li-Ion battery charger, designed to charge the battery pack at a 4A rate with led status indication.
-
STM32F407VGTx: ARM Cortex-M microcontroller with DSP instructions and FPU unit, used to estimate the SoC and control all the peripherals and sensors through their respectives communication protocols applying all the mentioned features earlier. It is enabled to interact with other external devices (such as an on-board computer) through CAN and RS232.
-
SN65HVD233: 3.3V CAN Bus transceiver to operate with the latter MCU compatible with ISO 11898 standard. This device is isolated from the rest of the components through the ADuM1201AR.
-
IRF9310PbF: Charge and Discarge switch for battery applications, this device is in charge of connection and disconnecting the load from the battery, basically, it's the main endpoint of proetection for the battery pack
Parts
199| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C25, C26 +5 |
| 12 | BZT52 | Diode_SMD:D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 10 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C48, C49, C50, C51, C53, C54, C55, C56, C57, C60 |
| 7 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15, R16, R17, R27, R28, R29, R43 |
| 6 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4, R40, R41, R67 |
| 6 | 1K, 1% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R13, R14, R24, R25, R26 |
| 6 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18, R19, R20, R30, R31, R32 |
| 6 | 2.2uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6, C8, C9, C43, C46 |
| 6 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 6 | 47@1/2W | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R21, R22, R23, R33, R34, R35 |
| 5 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C22, C23, C30, C47, C52 |
| 4 | 1.8K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9, R10, R11 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3mm_Pad_TopBottom | -(BATT), -(LOAD)1, +(BATT), +(LOAD)1 |
| 3 | 10K* | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R48, R49, R54 |
| 3 | 10uF | Capacitor_SMD:C_Elec_6.3x7.7 | C29, C34, C35 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C38, C42, C58 |
| 3 | 470R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R45, R46, R47 |
| 2 | 100pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C62, C63 |
| 2 | 10K 1% | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | TH1, TH2 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C44, C45 |
| 2 | 330nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C37, C59 |
| 2 | 47uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C7 |
| 2 | 6.8uH | Inductor_SMD:L_BOURNS_SRP6030 | L1, L2 |
| 2 | 60 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7 |
| 2 | BC848 | Package_TO_SOT_SMD:SOT-23 | Q11, Q12 |
| 2 | DMP4051LK3 | Package_TO_SOT_SMD:TO-252-2 | Q7, Q8 |
| 2 | FDD86580-F085 | Package_TO_SOT_SMD:TO-252-2 | Q9, Q10 |
| 1 | 0.056uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C28 |
| 1 | 0R010 1W 0.5% | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R39 |
| 1 | 0R020 1W 0.5% | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R52 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 100K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R42 |
| 1 | 10R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R37 |
| 1 | 10k 1/8W 5% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R36 |
| 1 | 10uF, low-ESR ceramic capacitor | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 1K 1/8W 1% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R55 |
| 1 | 1K8 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R61 |
| 1 | 1nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C41 |
| 1 | 2.2nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C40 |
| 1 | 2.5mOhm 1W 1% | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R1 |
| 1 | 2.7nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C24 |
| 1 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R66 |
| 1 | 22K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R65 |
| 1 | 27K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R59 |
| 1 | 3.3K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R63 |
| 1 | 3.3nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C36 |
| 1 | 330K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R58 |
| 1 | 33K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R64 |
| 1 | 37K* | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R50 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C61 |
| 1 | 47 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R68 |
| 1 | 51K 1/8W 0.5% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R57 |
| 1 | 560K 1/10W 0.5% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R56 |
| 1 | 5K1 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R62 |
| 1 | 5K6 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R44 |
| 1 | 6K8* | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R53 |
| 1 | 6R2 1/4W 1% | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R38 |
| 1 | 8K2* | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R51 |
| 1 | 8MHz | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | 9K1 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R60 |
| 1 | ADuM1201AR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | B340 | Diode_SMD:D_SMC | D19 |
| 1 | BQ24618RGET | Package_DFN_QFN:VQFN-24-1EP_4x4mm_P0.5mm_EP2.45x2.45mm_ThermalVias | U3 |
| 1 | BQ76PL536APAPR | Package_QFP:HTQFP-64-1EP_10x10mm_P0.5mm_EP8x8mm_Mask4.4x4.4mm_ThermalVias | U2 |
| 1 | CH_TS | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J4 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | Conn_01x07_Female | Connector_JST:JST_XH_S7B-XH-A_1x07_P2.50mm_Horizontal | J2 |
| 1 | D | Diode_SMD:D_SMA | D20 |
| 1 | DB9_Male | Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm | J6 |
| 1 | FERD2045SB-TR | Package_TO_SOT_SMD:TO-252-2 | U5 |
| 1 | GND-TIE | NetTie:NetTie-2_SMD_Pad0.5mm | NT1 |
| 1 | INA226 | Package_SO:VSSOP-10_3x3mm_P0.5mm | U9 |
| 1 | IRF9310PbF | Package_SO:SO-8_3.9x4.9mm_P1.27mm | Q13 |
| 1 | LOGO | Symbol:unr_logo | G*** |
| 1 | LOGO | Symbol:fceia_logo | G*** |
| 1 | N4007 | Diode_THT:D_A-405_P7.62mm_Horizontal | D13 |
| 1 | PDM1-S12-S3-S | Converter_DCDC:CONV_PDM1-S12-S3-S | U7 |
| 1 | PG | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D15 |
The 187 most common of 199 parts.
Similar boards
- 2 layers

- 2 layers44.5 × 50.8 mm

BCU Breadboard Adapter
OpenKNX/OpenKNX
OpenSource KNX software and hardware for maker, hobbyist and home automation enthusiasts
22 parts105 - 2 layers23 × 45 mm

- 4 layers120 × 100 mm

- 2 layers73 × 113 mm

- 2 layers100 × 88 mm

- 2 layers87 × 30.8 mm

- 2 layers49.5 × 40.5 mm

Hcv
chrkir/hcv
Local Viessmann E3 CAN-bus to MQTT bridge for Vitocal heat pumps. Features Home Assistant Auto-Discovery, ESP32 firmware, and Open Hardware.
32 parts9
Questions
How big is the Bms hardware PCB?
It measures 150.6 × 71.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bms hardware use?
199 parts, built around the PDM1-S12-S3-S, ADUM1201AR, BQ76PL536APAPR and FERD2045SB-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bms hardware KiCad files?
From the moyamartin/bms_hardware repository on GitHub, at the commit this page was made from: the board is bms_hardware.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bms hardware design in my own project?
Its repository states no licence, so its author keeps all rights: ask moyamartin before reusing the design.