2 layers150.6 × 71.7 mm
Bms hardware
moyamartin/bms_hardware
This is the hardware design section of the BMS project. It was designed with KiCAD.
199 parts3
BQ76PL536APAPR
Texas InstrumentsExtended
-40℃~+85℃ 12uA 3~6 7.2V~27V Lithium Battery Protection IC、Monitoring IC SPI Support Under-voltage lockout、Overcharge protection、Over-discharge protection、Cell balancing HTQFP-64(10x10) Battery Management ROHS
- Part id
- ti/BQ76PL536APAPR
- Category
- Battery Management
- Package
- HTQFP-64(10x10)
- Pins
- 65
- In stock
- 102 at JLCPCB (C2866587)
- Used on
- 1 open-source board
Overview
The BQ76PL536APAPR is a battery Management made by Texas Instruments in a HTQFP-64(10x10) package with 65 pins. -40℃~+85℃ 12uA 3~6 7.2V~27V Lithium Battery Protection IC、Monitoring IC SPI Support Under-voltage lockout、Overcharge protection、Over-discharge protection、Cell balancing HTQFP-64(10x10) Battery Management ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:BQ76PL536TPAPRQ1, from EasyEDA) and its footprint (EasyEDA_Cloud:HTQFP-64_L10.0-W10.0-P0.50-LS12.0-BL-EP5.9, from EasyEDA), ready for a KiCad board. 102 are in stock at JLCPCB (part C2866587). 1 open-source board in 1 repository on GitHub use it.
Symbol
Footprint
Pinout
65| Pin | Name | Type |
|---|---|---|
| 1 | VC6 | Unspecified |
| 2 | CB6 | Unspecified |
| 3 | VC5 | Unspecified |
| 4 | CB5 | Unspecified |
| 5 | VC4 | Unspecified |
| 6 | CB4 | Unspecified |
| 7 | VC3 | Unspecified |
| 8 | CB3 | Unspecified |
| 9 | VC2 | Unspecified |
| 10 | CB2 | Unspecified |
| 11 | VC1 | Unspecified |
| 12 | CB1 | Unspecified |
| 13 | VC0 | Unspecified |
| 14 | VSS | Unspecified |
| 15 | AGND | Unspecified |
| 16 | VREF | Unspecified |
| 17 | LDOA | Unspecified |
| 18 | LDOD1 | Unspecified |
| 19 | TS1- | Unspecified |
| 20 | TS1+ | Unspecified |
| 21 | CONV_S | Unspecified |
| 22 | DRDY_S | Unspecified |
| 23 | ALERT_S | Unspecified |
| 24 | FAULT_S | Unspecified |
| 25 | VSSD | Unspecified |
| 26 | SCLK_S | Unspecified |
| 27 | SDO_S | Unspecified |
| 28 | SDI_S | Unspecified |
| 29 | CS_S | Unspecified |
| 30 | NC30 | Unspecified |
| 31 | AUX | Unspecified |
| 32 | REG50 | Unspecified |
| 33 | VSS | Unspecified |
| 34 | VSS | Unspecified |
| 35 | VSS | Unspecified |
| 36 | CONV_H | Unspecified |
| 37 | DRDY_H | Unspecified |
| 38 | ALERT_H | Unspecified |
| 39 | FAULT_H | Unspecified |
| 40 | SCLK_H | Unspecified |
| 41 | SDO_H | Unspecified |
| 42 | SDI_H | Unspecified |
| 43 | CS_H | Unspecified |
| 44 | HSEL | Unspecified |
| 45 | GPIO | Unspecified |
| 46 | LDOD2 | Unspecified |
| 47 | GPAI- | Unspecified |
| 48 | GPAI+ | Unspecified |
| 49 | VSSD | Unspecified |
| 50 | TEST | Unspecified |
| 51 | NC51 | Unspecified |
| 52 | CS_N | Unspecified |
| 53 | SDI_N | Unspecified |
| 54 | SDO_N | Unspecified |
| 55 | SCLK_N | Unspecified |
| 56 | FAULT_N | Unspecified |
| 57 | ALERT_N | Unspecified |
| 58 | DRDY_N | Unspecified |
| 59 | CONV_N | Unspecified |
| 60 | TS- | Unspecified |
| 61 | TS2+ | Unspecified |
| 62 | NC62 | Unspecified |
| 63 | BAT1 | Unspecified |
| 64 | BAT2 | Unspecified |
| 65 | EP | Unspecified |
Open-source boards using it
1Parts like it
5
BQ75614PAPRQ1
HTQFP-64(10x10)-40℃~+125℃ 1 240mA Balancing IC、Monitoring IC Lithium Battery Not supported SPI Support HTQFP-64(10x10) Battery Management ROHSTexas InstrumentsBattery ManagementBQ76PL536APAPT
HTQFP-64(10x10)-40℃~+85℃ 12uA 3~6 7.2V~27V Not supported Protection IC、Balancing IC SPI Support HTQFP-64(10x10) Battery Management ROHSTexas InstrumentsBattery ManagementBQ79616PAPR
HTQFP-64-EP(10x10)-40℃~+105℃ 16 220uA 240mA Not supported Protection IC、Balancing IC、Monitoring IC SPI、UART Support HTQFP-64-EP(10x10) Battery Management ROHSTexas InstrumentsBattery ManagementMAX14920ECB+T
TQFP-64-EP(10x10)12 TQFP-64-EP(10x10) Analog Front End (AFE) ROHSMaxim Integrated (Analog Devices)Battery ManagementMAX14920ECB+
TQFP-64-EP(10x10)-40℃~+85℃ 1~12 6V~65V Lithium Battery Monitoring IC SPI Support Under-voltage lockout、Overcharge protection、Over-discharge protection、Cell balancing TQFP-64-EP(10x10) Analog Front End (AFE) ROHSMaxim Integrated (Analog Devices)Battery Management
Questions
Is there a KiCad symbol and footprint for the BQ76PL536APAPR?
Yes. The symbol is EasyEDA_Cloud:BQ76PL536TPAPRQ1 and the footprint EasyEDA_Cloud:HTQFP-64_L10.0-W10.0-P0.50-LS12.0-BL-EP5.9, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the BQ76PL536APAPR?
HTQFP-64(10x10), with 65 pins. Its footprint is drawn on this page.
Where is the BQ76PL536APAPR datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the BQ76PL536APAPR?
JLCPCB lists it as part C2866587, with 102 in stock; the sellers' links on this page open their listings.
What can replace the BQ76PL536APAPR?
Parts like it in the library: the BQ75614PAPRQ1 by Texas Instruments, the BQ76PL536APAPT by Texas Instruments, the BQ79616PAPR by Texas Instruments and the MAX14920ECB+T by Maxim Integrated (Analog Devices). Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the BQ76PL536APAPR?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.