Skip to the content
2 layersEsp32 gateway, the printed circuit board in 3D

PCB para Gateway ESP32

Copper layers
2
Thickness
1.6 mm
Parts
79
Nets
77
Pads
212
Tracks, vias
527, 60
Pours
3
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
20 Nov 2020
Updated
31 May 2021

Overview

Esp32 gateway is an open-source printed circuit board by radioelf, from the radioelf/esp32_gateway_MQTT repository on GitHub. It is a 2-layer board with 79 parts on 77 nets, routed with 527 tracks and 60 vias.

It is built around the ESP32-S, LM1117-3.3 and TSAL6200, with the BC847, BSS138 and DMP4051LK3 among its other parts. Its parts include 24 resistors, 23 connectors, 11 diodes, 8 capacitors and 5 transistors. It belongs with the ESP32 boards of this library.

Main components

8

README

README.md

esp32_gateway_MQTT

PCB para Gateway ESP32, para usar con openmqttgateway

Creative Commons License Disclaimer

UNLESS OTHERWISE MUTUALLY AGREED TO BY THE PARTIES IN WRITING, LICENSOR OFFERS THE WORK AS-IS AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE WORK, EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTIBILITY, FITNESS FOR A PARTICULAR PURPOSE, NONINFRINGEMENT, OR THE ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OF ABSENCE OF ERRORS, WHETHER OR NOT DISCOVERABLE. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO SUCH EXCLUSION MAY NOT APPLY TO YOU. EXCEPT TO THE EXTENT REQUIRED BY APPLICABLE LAW, IN NO EVENT WILL LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES ARISING OUT OF THIS LICENSE OR THE USE OF THE WORK, EVEN IF LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

http://creativecommons.org/licenses/by-sa/3.0/

Parts

79
QtyValueFootprintReferences
14Conn_01x01_FemaleConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ3, J4, J9, J11, J12, J13, J14, J15, J16, J17, J18, J19, J22, J23
610kResistor_SMD:R_0805_2012MetricR17, R18, R19, R20, R21, R24
668Resistor_SMD:R_0805_2012MetricR2, R3, R4, R10, R11, R12
6TSAL6200LED_THT:LED_D3.0mm_IRBlackD3, D4, D5, D6, D7, D8
3100nFCapacitor_SMD:C_0805_2012MetricC1, C4, C7
31kResistor_SMD:R_0805_2012MetricR5, R7, R23
3470Resistor_SMD:R_0805_2012MetricR14, R15, R16
2100Resistor_SMD:R_0805_2012MetricR6, R8
2100uFCapacitor_SMD:CP_Elec_4x3.9C3, C6
210KResistor_SMD:R_0805_2012MetricR9, R13
22N7002Package_TO_SOT_SMD:SOT-23Q4, Q5
11uFCapacitor_SMD:C_1206_3216MetricC8
1220uFCapacitor_SMD:CP_Elec_6.3x3C2
122uFCapacitor_SMD:CP_Elec_3x5.4C5
14K7Resistor_SMD:R_0805_2012MetricR22
14k7Resistor_SMD:R_0805_2012MetricR1
1BC847Package_TO_SOT_SMD:SOT-23Q2
1BSS138Package_TO_SOT_SMD:SOT-23Q3
1BootConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ6
1CC2530_AConnector_Samtec_HLE_THT:Samtec_HLE-106-02-xx-DV-TE_2x06_P2.54mm_HorizontalJ21
1CC2530_BConnector_Samtec_HLE_THT:Samtec_HLE-106-02-xx-DV-TE_2x06_P2.54mm_HorizontalJ20
1DMP4051LK3Package_TO_SOT_SMD:TO-252-2Q1
1ESP32-SRF_Module:ESP32-WROOM-32U2
1GreenLED_SMD:LED_0805_2012MetricD11
1IRFConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ10
1LL4148Diode_SMD:D_MiniMELFD1
1LM1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U1
1ModeJumper:SolderJumper-3_P1.3mm_Bridged2Bar12_Pad1.0x1.5mm_NumberLabelsJP1
1OrangeLED_SMD:LED_0805_2012MetricD9
1POWER IntConnector_JST:JST_NV_B02P-NV_1x02_P5.00mm_VerticalJ1
1POWER OutConnector_JST:JST_NV_B02P-NV_1x02_P5.00mm_VerticalJ2
1RedLED_SMD:LED_0805_2012MetricD10
1ResetButton_Switch_SMD:SW_SPST_REED_CT05-XXXX-J1SW1
1SRX882Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ8
1STX882Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ7
1UartConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ5
1whiteLED_SMD:LED_0805_2012MetricD2

The 75 most common of 79 parts.

Similar boards

  • 2 layersOpenMQTTGatewayPCB, the printed circuit board in 3D

    OpenMQTTGatewayPCB

    ebrithiljonas/OMG_PCB

    All in One PCB for the OpenMQTTGateway Project

    36 parts7GPL-3.0
  • 2 layers150.6 × 71.7 mmBms hardware, the printed circuit board in 3D

    Bms hardware

    moyamartin/bms_hardware

    This is the hardware design section of the BMS project. It was designed with KiCAD.

    199 parts3
  • 2 layers44.8 × 49.8 mmControlAVR155, the printed circuit board in 3D

    ControlAVR155

    radioelf/Mod.-Harman-Kardon-AVR-155-Mqtt-bluetooth

    Modificación amplificador Harman Kardon AVR 155, con un ESP32 para poder controlar desde MQTT y usar el modulo UDA1334a para poder reproducir música a través de bluetooth

    32 parts2
  • 2 layers102 × 66 mmDOJO PCB, the printed circuit board in 3D

    DOJO PCB

    0804robot/DOJO_PCB

    PCB for DOJO

    25 parts
  • 2 layers107 × 100 mmTechweekpcb, the printed circuit board in 3D

    Techweekpcb

    0804robot/mazerunner

    Tech Week Maze Runner

    26 partsGPL-3.0
  • 2 layers89.6 × 59.7 mmCAR PCB, the printed circuit board in 3D

    CAR PCB

    kimanimichael/MKWIFI_CAR_PCB

    MKWIFI RC Printed Circuit Board

    34 parts
  • 2 layers176 × 100 mmSmartDesk v1p0, the printed circuit board in 3D

    SmartDesk v1p0

    daverowntree/SmartDesk

    I open sourced a design I made a few years back for a non-paying client. Use it as you see fit!

    190 parts

Questions

What parts does the Esp32 gateway use?

79 parts, built around the ESP32-S, LM1117-3.3, TSAL6200 and BC847. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Esp32 gateway KiCad files?

From the radioelf/esp32_gateway_MQTT repository on GitHub, at the commit this page was made from: the board is esp32_gateway.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Esp32 gateway design in my own project?

Its repository states no licence, so its author keeps all rights: ask radioelf before reusing the design.