

CAR PCB
MKWIFI RC Printed Circuit Board
- Size
- 89.6 × 59.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 52
- Pads
- 120
- Tracks, vias
- 153, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 27 Aug 2022
- Updated
- 27 Aug 2022
Overview
CAR PCB is an open-source printed circuit board by kimanimichael, from the kimanimichael/MKWIFI_CAR_PCB repository on GitHub. It is a 2-layer board of 89.6 × 59.7 mm with 34 parts on 52 nets, routed with 153 tracks and 0 vias.
It is built around the ESP32-S. Its parts include 11 connectors, 10 resistors, 4 capacitors, 3 ICs and 2 diodes. It belongs with the ESP32 boards of this library.
Main components
1Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | ~ | UserLibrary:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10, R11, R12, R13, R14 |
| 4 | 10uF | UserLibrary:CP_Radial_D5.0mm_P2.50mm | C1, C2, C3, C4 |
| 3 | ~ | UserLibrary:PinHeader_2x03_P2.54mm_Vertical | J11, J12, J13 |
| 3 | ~ | UserLibrary:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J8, J9, J10 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_3mm_Pad | H1, H2 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1, J6 |
| 1 | 1200 | UserLibrary:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 1k | UserLibrary:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 220 | UserLibrary:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 330 | UserLibrary:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | Buzzer | Buzzer_Beeper:MagneticBuzzer_Kingstate_KCG0601 | BZ1 |
| 1 | Conn_01x02_Male | UserLibrary:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J7 |
| 1 | ESP32-S | UserLibrary:ESP32-S | U3 |
| 1 | LED | LED_THT:LED_D5.0mm | D3 |
| 1 | LM1084-5.0 | UserLibrary:TO-220-3_Vertical | U2 |
| 1 | LM1084-ADJ | UserLibrary:TO-220-3_Vertical | U1 |
| 1 | Motor_Servo | UserLibrary:Servo | M1 |
| 1 | R_Small | UserLibrary:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9 |
| 1 | Screw_Terminal_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | ~ | LED_THT:LED_D5.0mm | D4 |
| 1 | ~ | UserLibrary:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J4 |
Similar boards
- 2 layers

- 2 layers44.8 × 49.8 mm

ControlAVR155
radioelf/Mod.-Harman-Kardon-AVR-155-Mqtt-bluetooth
Modificación amplificador Harman Kardon AVR 155, con un ESP32 para poder controlar desde MQTT y usar el modulo UDA1334a para poder reproducir música a través de bluetooth
32 parts2 - 2 layers102 × 66 mm

- 2 layers107 × 100 mm

- 2 layers142.5 × 106.4 mm

- 2 layers26 × 30 mm

Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0 - 2 layers171.2 × 72.9 mm

Amiga gfxcard old
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
34 parts1k - 2 layers53.5 × 62.5 mm

Led matrix
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
34 parts915
Questions
How big is the CAR PCB PCB?
It measures 89.6 × 59.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CAR PCB use?
34 parts, built around the ESP32-S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CAR PCB KiCad files?
From the kimanimichael/MKWIFI_CAR_PCB repository on GitHub, at the commit this page was made from: the board is CAR_PCB.kicad_pcb and its schematic CAR_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CAR PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask kimanimichael before reusing the design.