
LPC176x MultiFunction
RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
BBBHalfSiding is an open-source printed circuit board by RobertPHeller, from the RobertPHeller/RPi-RRCircuits repository on GitHub. It is a 2-layer board of 89.4 × 166.9 mm with 70 parts on 124 nets, routed with 552 tracks and 113 vias.
It is built around the TRS202ECD, MCP2551-I/P and SN75LBC179P, with the TC4428COA, ULN2803A and 74HC00D among its other parts. Its parts include 19 capacitors, 15 resistors, 14 ICs, 14 connectors and 2 diodes. It belongs with the ESP32 boards of this library.
This is a SMD variant of 16DriverOutputHAT.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | .1 uf | C1 | C1, C2, C3, C4, C5, C6, C7, C8, C10, C11, C12, C13, C15, C17, C18, C19 +1 |
| 4 | 60 Ohms | R1 | R6, R7, R8, R9 |
| 3 | 10K Ohms | R1 | R4, R5, R15 |
| 3 | 4.75K Ohms | R1 | R12, R13, R14 |
| 2 | 10K Ohms | SIL-5 | R1, R2 |
| 2 | 150 Ohms | DIP-16__300 | RP1, RP2 |
| 2 | 5.6K Ohms | R1 | R10, R11 |
| 2 | 74LV125AN | DIP-14__300 | U10, U11 |
| 2 | BeagleBone_Black_Header | Socket_BeagleBone_Black:Socket_BeagleBone_Black | P8, P9 |
| 2 | RJ45 | RJ45_8N-S | J2, J3 |
| 2 | TC4428 | DIP-8__300 | U4, U5 |
| 2 | TRS202E | DIP-16__300 | U7, U9 |
| 2 | ULN2803A | DIP-18__300 | U2, U3 |
| 1 | + 12 out - | ScrewTerm2.54-2 | P10 |
| 1 | - 12 in + | bornier2 | P7 |
| 1 | 10 Ohms | R1 | R3 |
| 1 | 15 uf | CP_Radial_D5.0mm_P2.00mm | C14 |
| 1 | 2 1 0 | pin_array_3x2 | J1 |
| 1 | 47 nf | C1 | C16 |
| 1 | 74HC00 | DIP-14__300 | U6 |
| 1 | ABS Slave Bus | PIN_ARRAY_5x1 | P4 |
| 1 | BRIDGEX | KBL | D1 |
| 1 | CAT24C256W | DIP-8__300 | U13 |
| 1 | East (Points) | PIN_ARRAY_4x1 | P2 |
| 1 | FMR FMY FMG PLR PLY PHR PHY PHG +5 | ScrewTerm_2.54-9 | T1 |
| 1 | In Track Out | bornier2 | P1 |
| 1 | MCP23017 | DIP-28__300 | U1 |
| 1 | MCP2551 | DIP-8__300 | U12 |
| 1 | MCT6H | DIP-8__300 | IC1 |
| 1 | Motor 0 | ScrewTerm_2.54-5 | T4 |
| 1 | Motor 1 | ScrewTerm_2.54-5 | T5 |
| 1 | SB240E | DO-15 | D2 |
| 1 | SN75LBC179 | DIP-8__300 | U8 |
| 1 | SP7 SP6 SP5 SP4 SP3 FDR FDY FDG +5 | ScrewTerm_2.54-9 | T2 |
| 1 | Termination | PIN_ARRAY_2X2 | P6 |
| 1 | WP 1 0 | pin_array_3x2 | P11 |
| 1 | West Div. (Frog, Revesed) | PIN_ARRAY_4x1 | P5 |
| 1 | West Main (Frog, Normal) | PIN_ARRAY_4x1 | P3 |

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading


RobertPHeller/2ndGenLocoControlStand
Model 2nd Generation Diesel Locomotive Control Stand



JimKueneman/TurnoutBoss
This repository contains all the design files, manuals, firmware, production information for the LCC TurnoutBoss Node

controlol/led-driver-constant-current-esphome
KiCad design for a constant current driver with Mean Well dimmable LED driver and ESPHome firmware

RobertPHeller/STM32F303-RIR4
STM32F303 Nucleo Baseboard for Aztrax RIR4 shield

gumistor/nixie_on_can_pcb
Six NIXIE display with CAN bus interface. Powered with step up regulator.
It measures 89.4 × 166.9 mm and has 2 copper layers, 1.6 mm thick.
70 parts, built around the TRS202ECD, MCP2551-I/P, SN75LBC179P and TC4428COA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RobertPHeller/RPi-RRCircuits repository on GitHub, at the commit this page was made from: the board is BBBHalfSiding/BBBHalfSiding.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask RobertPHeller before reusing the design.