Skip to the content
2 layers74 × 71 mmOppakkerV4, the printed circuit board in 3D

XRL kabel: https://www.allekabels.nl/xlr-kabel/8/1312747/xlr-kabel.html XRL chassis: https://www.allekabels.nl/xlr-stekker/69/1601/xlr-chassis-3-polig.html XRL chassis…

Size
74 × 71 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
39
Pads
90
Tracks, vias
164, 0
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
31 Jan 2021
Updated
8 Jan 2026

Overview

OppakkerV4 is an open-source printed circuit board by robbertvdzon, from the robbertvdzon/schaakrob repository on GitHub. It is a 2-layer board of 74 × 71 mm with 25 parts on 39 nets, routed with 164 tracks and 0 vias.

It is built around the IRLB8721PBF. Its parts include 8 resistors, 4 diodes, 4 transistors, 4 connectors and 2 capacitors. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

Parts

25
QtyValueFootprintReferences
4100ohmResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR2, R5, R7, R10
410KResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1, R4, R8, R11
4DResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalD1, D2, D3, D4
4IRLB8721PBFPackage_TO_SOT_THT:TO-220-3_VerticalQ1, Q2, Q3, Q4
2Conn_01x04TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-04P_1x04_P5.00mmJ1, J4
1100nFCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC1
1Arduino_Nano_v3.xModule:Arduino_NanoA1
1BuzzerBuzzer_Beeper:Buzzer_15x7.5RM7.6BZ1
1C_PolarizedCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC2
1Conn_01x02TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mmJ3
1Conn_01x04Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_VerticalJ6
1SW_PushButton_Switch_THT:SW_PUSH-12mmSW1

More from robbertvdzon/schaakrob

3
  • 2 layers68.5 × 67 mmOppakkerV5, the printed circuit board in 3D

    OppakkerV5

    robbertvdzon/schaakrob

    XRL kabel: https://www.allekabels.nl/xlr-kabel/8/1312747/xlr-kabel.html XRL chassis: https://www.allekabels.nl/xlr-stekker/69/1601/xlr-chassis-3-polig.html XRL chassis…

    43 parts
  • 2 layers54.5 × 70 mmOppakkerV3-mosfeds backup, the printed circuit board in 3D

    OppakkerV3-mosfeds backup

    robbertvdzon/schaakrob

    XRL kabel: https://www.allekabels.nl/xlr-kabel/8/1312747/xlr-kabel.html XRL chassis: https://www.allekabels.nl/xlr-stekker/69/1601/xlr-chassis-3-polig.html XRL chassis…

    27 parts
  • 2 layers60 × 70 mmOppakkerV3, the printed circuit board in 3D

    OppakkerV3

    robbertvdzon/schaakrob

    XRL kabel: https://www.allekabels.nl/xlr-kabel/8/1312747/xlr-kabel.html XRL chassis: https://www.allekabels.nl/xlr-stekker/69/1601/xlr-chassis-3-polig.html XRL chassis…

    26 parts

Similar boards

  • 2 layers50.8 × 28.6 mmBeaglebone obd, the printed circuit board in 3D

    Beaglebone obd

    KoffeinFlummi/rustbucket

    Access your car's diagnostics with a BeagleBone Blue and Rust.

    20 parts60GPL-3.0
  • 2 layers99.1 × 99.1 mm3D Scanner, the printed circuit board in 3D

    3D Scanner

    nazzrim/Open3DScanner

    Open3DScanner 3D Scanner design

    33 parts60
  • 2 layers36 × 31 mmESPDimmer, the printed circuit board in 3D

    ESPDimmer

    stelioskat/esp8266-led-dimmer

    Wifi enabled LED strip dimmer that is controlled using MQTT messages.

    11 parts20MIT
  • 2 layers70.3 × 30.2 mmControl pcb, the printed circuit board in 3D

    Control pcb

    kbob/filabilly-humidor

    Dehumidifier cabinet for printer filament

    16 parts9
  • 4 layers104.2 × 77.7 mmDc26, the printed circuit board in 3D

    Dc26

    dodgymike/dc26-monero-badge-pcb

    Defcon 26 Monero badge PCB

    714 parts6
  • 4 layers69.9 × 44.5 mmDoughLee2, the printed circuit board in 3D

    DoughLee2

    chl33/Dough133

    A temperature-controlled container for proofing and fermenting soughdough

    62 parts3MIT
  • 2 layers61 × 78.7 mmESP RGB LED, the printed circuit board in 3D

    ESP RGB LED

    Sean-AP/ESP-RGB-LED

    MicroPython module for controlling an RGB LED strip

    10 parts2
  • 2 layers33.8 × 49.5 mmEspAtomizerpcbv3rev1, the printed circuit board in 3D

    EspAtomizerpcbv3rev1

    Adamibus/ESPAtomizer-iOS

    This is a minimal KiCad 6/7 project skeleton. Open ESPAtomizer.kicadpro in KiCad.

    21 parts1

Questions

How big is the OppakkerV4 PCB?

It measures 74 × 71 mm and has 2 copper layers, 1.6 mm thick.

What parts does the OppakkerV4 use?

25 parts, built around the IRLB8721PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the OppakkerV4 KiCad files?

From the robbertvdzon/schaakrob repository on GitHub, at the commit this page was made from: the board is schema-ontwerp/oppakkerV3/oppakkerV4.kicad_pcb and its schematic schema-ontwerp/oppakker/oppakker.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the OppakkerV4 design in my own project?

Its repository states no licence, so its author keeps all rights: ask robbertvdzon before reusing the design.