
OppakkerV3-mosfeds backup
robbertvdzon/schaakrob
XRL kabel: https://www.allekabels.nl/xlr-kabel/8/1312747/xlr-kabel.html XRL chassis: https://www.allekabels.nl/xlr-stekker/69/1601/xlr-chassis-3-polig.html XRL chassis…

XRL kabel: https://www.allekabels.nl/xlr-kabel/8/1312747/xlr-kabel.html XRL chassis: https://www.allekabels.nl/xlr-stekker/69/1601/xlr-chassis-3-polig.html XRL chassis…
OppakkerV5 is an open-source printed circuit board by robbertvdzon, from the robbertvdzon/schaakrob repository on GitHub. It is a 2-layer board of 68.5 × 67 mm with 43 parts on 39 nets, routed with 194 tracks and 0 vias.
It is built around the IRLB8721PBF. Its parts include 8 resistors, 4 diodes, 4 transistors, 4 connectors and 2 capacitors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
nano: https://www.bitsandparts.nl/Arduino-Nano-3.0-Atmega328-5V-16-MHz-(compatible-clone)-p122093 headers voor nano: https://www.bitsandparts.nl/Headerpins-stackable-11mm-16-pins-p119111 4 pins header: https://www.bitsandparts.nl/Header-voor-PCB-4-pins-p101250 4 pin kabel: https://www.bitsandparts.nl/Signaalconnector-Molex-4-polig-met-draad-p113160 3 pin header: https://www.bitsandparts.nl/Header-voor-PCB-3-pins-p101249 3 pin kabel: https://www.bitsandparts.nl/Signaalconnector-Molex-3-polig-met-draad-p113159 2 pin header: https://www.bitsandparts.nl/Header-voor-PCB-2-pins-p101248 2 pin kabel: https://www.bitsandparts.nl/Signaalconnector-Molex-2-polig-met-draad-p113158 grote print plaat: https://www.bitsandparts.nl/Prototyping-board-PCB-(39x63-gaats-10x16cm)-p100969 kleine print plaat: https://www.bitsandparts.nl/Prototyping-board-PCB-(39x19-gaats-10x5cm)-p100967
XRL kabel: https://www.allekabels.nl/xlr-kabel/8/1312747/xlr-kabel.html XRL chassis: https://www.allekabels.nl/xlr-stekker/69/1601/xlr-chassis-3-polig.html XRL chassis: https://www.allekabels.nl/xlr-stekker/69/1602/xlr-chassis-3-polig.html
schakelaar: https://www.allekabels.nl/schakelaar/7303/1079540/wipschakelaar.html (max 16A = 2A per motor!)
see /documentation/setup_pi.md
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | , , , , , , , , , , , , , , , +2 | ||
| 4 | 100ohm | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R5, R7, R10 |
| 4 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R4, R8, R11 |
| 4 | D | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | D1, D2, D3, D4 |
| 4 | IRLB8721PBF | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3, Q4 |
| 2 | Conn_01x04 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-04P_1x04_P5.00mm | J1, J4 |
| 1 | 100nF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_15x7.5RM7.6 | BZ1 |
| 1 | C_Polarized | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C2 |
| 1 | Conn_01x02 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J3 |
| 1 | Conn_01x04 | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J6 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH-12mm | SW1 |

robbertvdzon/schaakrob
XRL kabel: https://www.allekabels.nl/xlr-kabel/8/1312747/xlr-kabel.html XRL chassis: https://www.allekabels.nl/xlr-stekker/69/1601/xlr-chassis-3-polig.html XRL chassis…

robbertvdzon/schaakrob
XRL kabel: https://www.allekabels.nl/xlr-kabel/8/1312747/xlr-kabel.html XRL chassis: https://www.allekabels.nl/xlr-stekker/69/1601/xlr-chassis-3-polig.html XRL chassis…

robbertvdzon/schaakrob
XRL kabel: https://www.allekabels.nl/xlr-kabel/8/1312747/xlr-kabel.html XRL chassis: https://www.allekabels.nl/xlr-stekker/69/1601/xlr-chassis-3-polig.html XRL chassis…

KoffeinFlummi/rustbucket
Access your car's diagnostics with a BeagleBone Blue and Rust.


stelioskat/esp8266-led-dimmer
Wifi enabled LED strip dimmer that is controlled using MQTT messages.



chl33/Dough133
A temperature-controlled container for proofing and fermenting soughdough


Adamibus/ESPAtomizer-iOS
This is a minimal KiCad 6/7 project skeleton. Open ESPAtomizer.kicadpro in KiCad.
It measures 68.5 × 67 mm and has 2 copper layers, 1.6 mm thick.
43 parts, built around the IRLB8721PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the robbertvdzon/schaakrob repository on GitHub, at the commit this page was made from: the board is schema-ontwerp/oppakkerV5/oppakkerV5.kicad_pcb and its schematic schema-ontwerp/oppakker/oppakker.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask robbertvdzon before reusing the design.