2 layers55.9 × 83.8 mm
4 layers150 × 200 mm
RloopPowerNode
rLoopTeam/elec-power-node1- Size
- 150 × 200 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 138
- Nets
- 121
- Pads
- 450
- Tracks, vias
- 834, 113
- Pours
- 44
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 1 Apr 2016
- Updated
- 28 May 2016
Overview
RloopPowerNode is an open-source printed circuit board by rLoopTeam, from the rLoopTeam/elec-power-node repository on GitHub. It is a 4-layer board of 150 × 200 mm with 138 parts on 121 nets, routed with 834 tracks and 113 vias.
It is built around the AMC1100DUB, MS560702BA03-50 and CPC1718J, with the H11F1SM, 78L05 and MAX14850ASE+ among its other parts. Its parts include 37 resistors, 37 connectors, 17 capacitors, 16 diodes and 12 ICs.
Main components
9
AMC1100DUB
DIP-8-40℃~+105℃ 100kHz 2.5kV/us 200uV 3005 8 Differential Isolated ΔΣ (Sigma-Delta) modulator、Full-differential topology DIP-8 Isolation Amplifiers ROHSTexas InstrumentsIsolation Amplifiers
MS560702BA03-50
SMD-8P-40℃~+85℃ 1.5mbar 1.8V~3.6V 140nA 1Kpa~1.2bar I2C、SPI Yes SMD-8P Pressure Sensors ROHSTE ConnectivityPressure Sensors
CPC1718J
ISOPLUS-264Solid State Relays (Triac Output)Littelfuse/IXYS
H11F1SM
SMD-6P-40℃~+100℃ 1 1.3V 100mA 300mW 30V 5V 60mA 7.5kV DC FET SMD-6P Transistor, Photovoltaic Output Optoisolators ROHSonsemiTransistor, Photovoltaic Output Optoisolators
78L05
SOT-89-3-20℃~+120℃@(Tj) 1 1.7V 100mA 2mA 30V 40uV 49dB@(120Hz) 5V Fixed Over Temperature Protection、Short Circuit Protection Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSUMWVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MAX14850ASE+
SOIC-16-40℃~+125℃ 1.5kV/us 2 2 30ns 3V~5.5V 3V~5.5V 50Mbps 600 High Level SOIC-16 Digital Isolators ROHSMaxim Integrated (Analog Devices)Digital Isolators
MAX6814XK
SC-70-5-40℃~+85℃@(TA) 1 1.12s 2.19V Active Low Push-pull Watchdog Timer SC-70-5 Supervisor and Reset ICsMaxim Integrated (Analog Devices)Supervisor And Reset ICs
BSS84
SOT-23-55℃~+150℃ 1 P-Channel 130mA 2.8pF 24.6pF 2V 3.2Ω@5V 300mW 4.7pF 50V 590pC@10V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsJUMPER3
HDR-TH_3P-P2.54-L7.6-W2.5HDR-TH-3P-2.54mm New Arrivals ROHSWürth ElektronikUncategorised
Parts
138| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | P19, P20, P21, P22, P23, P24, P27, P28, P29, P30, P32, P34, P36 |
| 9 | 100K | Resistors_SMD:R_0603 | R3, R7, R15, R18, R24, R28, R32, R36, R37 |
| 7 | 100n | Capacitors_SMD:C_0603 | C1, C2, C3, C8, C14, C16, C17 |
| 7 | CONN_01X02 | -footprints:CONN-JST-XH-2-PTH-RGT | P1, P2, P3, P4, P14, P15, P16 |
| 7 | D | Diodes_SMD:SOD-123 | D1, D4, D8, D11, D13, D15, D17 |
| 5 | 1u | Capacitors_SMD:C_0603 | C4, C5, C6, C7, C15 |
| 5 | LED | LEDs:LED_0603 | D3, D10, D12, D14, D16 |
| 4 | 2K | Resistors_SMD:R_0603 | R22, R26, R30, R34 |
| 4 | 470 | Resistors_SMD:R_0603 | R4, R5, R14, R16 |
| 4 | 470R | Resistors_SMD:R_0603 | R23, R27, R31, R35 |
| 4 | CONN_01X02 | -footprints:CONN-TE-MICROMNL-2-PTH-MALE-RGT | P6, P9, P10, P13 |
| 4 | CONN_01X03 | Pin_Headers:Pin_Header_Angled_1x03 | P7, P8, P11, P12 |
| 4 | CONN_02X02 | Pin_Headers:Pin_Header_Straight_2x02 | P25, P26, P31, P33 |
| 4 | CPC1718 | -footprints:CPC1718 | U1, U2, U5, U6 |
| 4 | NMOS | TO_SOT_Packages_SMD:SOT-23 | Q4, Q5, Q6, Q7 |
| 4 | R | Resistors_SMD:R_1210_HandSoldering | R21, R25, R29, R33 |
| 3 | 100 | Resistors_SMD:R_0603 | R8, R9, R19 |
| 3 | Jumper_NC_Small | -footprints:SOLDERJUMPER | JP1, JP2, JP4 |
| 2 | 10 | Resistors_SMD:R_0603 | R17, R20 |
| 2 | 100n | Capacitors_SMD:C_1206 | C12, C13 |
| 2 | 4u7 | SMD_Packages:SMD-1210_Pol | C9, C11 |
| 2 | D | Diodes_SMD:SMC_Standard | D6, D7 |
| 2 | H11F1SM | -footprints:OPTOCOUPLER-0.1in-6pin-SMD | U3, U12 |
| 2 | Jumper_NC_Small | Resistors_SMD:R_1206_HandSoldering | JP5, JP6 |
| 1 | 10 | -footprints:D-Pak-TO252AA-Resistor | R12 |
| 1 | 100 | -footprints:D-Pak-TO252AA-Resistor | R11 |
| 1 | 100K | Resistors_SMD:R_1206_HandSoldering | R10 |
| 1 | 10K | Resistors_SMD:R_1206_HandSoldering | R13 |
| 1 | 10K | Resistors_SMD:R_0603 | R6 |
| 1 | 1K | Resistors_SMD:R_1210 | R2 |
| 1 | 1u | Capacitors_SMD:C_0805 | C10 |
| 1 | 78L05 | -footprints:SOT89-3-VREG | U9 |
| 1 | ? | Resistors_SMD:R_0603 | R1 |
| 1 | AMC1100 | -footprints:SOIC-8-W | U10 |
| 1 | AMPMODU-02X05 | -footprints:BMS | P17 |
| 1 | BSS84 | TO_SOT_Packages_SMD:SOT-23 | Q3 |
| 1 | CONN_01X01 | -footprints:SCREWPAD-4-40 | P5 |
| 1 | CONN_01X04 | -footprints:CONN-TE-MICROMNL-4-PTH-MALE-RGT | P5 |
| 1 | CONN_01X08 | Pin_Headers:Pin_Header_Straight_1x08 | P35 |
| 1 | DS2482-100 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U7 |
| 1 | D_Schottky | Diodes_SMD:SOD-123 | D2 |
| 1 | FUSE | -footprints:FUSE-MULTICHOICE | F2 |
| 1 | FUSE | Fuse_Holders_and_Fuses:Fuseholder5x20_horiz_open_universal_Type-III | F1 |
| 1 | JUMPER3 | Pin_Headers:Pin_Header_Straight_1x03 | JP3 |
| 1 | MAX14850 | Housings_SSOP:TSSOP-16_4.4x5mm_Pitch0.65mm | U11 |
| 1 | MAX6814 | TO_SOT_Packages_SMD:SOT-23-5 | U4 |
| 1 | MS5607-02BA03 | -footprints:MS56xx | U8 |
| 1 | NMOS | -footprints:D-Pak_TO252AA | Q2 |
| 1 | NODE_CORE_CONNECTOR | -footprints:NODE-CORE | A1 |
| 1 | PCB-OUTLINE | -footprints:PCBOUTLINE-POWERNODE | PCB1 |
| 1 | PMOS | TO_SOT_Packages_SMD:SOT-23 | Q1 |
| 1 | Q_NMOS | TO_SOT_Packages_SMD:SOT-23 | Q8 |
| 1 | Relay_DPDT | -footprints:RELAY-SOCKET-K10 | RL1 |
| 1 | SHUNT | -footprints:CONN-JST-XH-2-PTH-RGT | P18 |
| 1 | ZENER +2V7 | Diodes_SMD:SOD-123 | D5 |
Questions
How big is the RloopPowerNode PCB?
It measures 150 × 200 mm and has 4 copper layers, 1.6 mm thick.
What parts does the RloopPowerNode use?
138 parts, built around the AMC1100DUB, MS560702BA03-50, CPC1718J and H11F1SM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RloopPowerNode KiCad files?
From the rLoopTeam/elec-power-node repository on GitHub, at the commit this page was made from: the board is rloopPowerNode.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RloopPowerNode design in my own project?
Its repository states no licence, so its author keeps all rights: ask rLoopTeam before reusing the design.
More from rLoopTeam/elec-power-node
1Similar boards
- 6 layers100 × 160 mm
OWNVERTER
owntech-foundation/OWNVERTER
The OwnVerter is an open-source 3-phase power converter that can be used to control multiple types of motors and is compatible with different types of sensors.
474 parts16 - 2 layers33.7 × 37.1 mm
Touch switch
jibonaronno/documentsA
It is required to change settings using SCLManager.exe when required for new setup.
10 parts4 - 2 layers42.5 × 62.5 mm
Evse
Tinkerforge/evse-bricklet
This Bricklet together with the ESP32 Brick the RS485 Bricklet and the NFC Bricklet form the hardware used in the WARP Charger
92 parts3 - 4 layers88.1 × 17.1 mm
Client pcb
nullcline/fuel_cell_monitor
[school] a sponsored capstone project to design a low-cost, scalable, voltage monitoring system that was capable of measuring a wide voltage range
23 parts - 2 layers30 × 40 mm
- 2 layers198.8 × 164.8 mm
- 2 layers50.8 × 61.6 mm
- 4 layers33 × 90 mm
Active drag system
RocketryVT/active-drag-system
Eigen Library, cmake, and arm-none-eabi-gcc tooling required for successful build.
100 parts6MIT