2 layers99 × 153 mm
2 layers198.8 × 164.8 mm
POWER NODE V2
rLoopTeam/elec-pcb5All PCB designs for rLoop in Altium Designer 13 format.
- Size
- 198.8 × 164.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 152
- Nets
- 127
- Pads
- 520
- Tracks, vias
- 1,194, 91
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 18 Jul 2016
- Updated
- 26 Aug 2017
Overview
POWER NODE V2 is an open-source printed circuit board by rLoopTeam, from the rLoopTeam/elec-pcb repository on GitHub. It is a 2-layer board of 198.8 × 164.8 mm with 152 parts on 127 nets, routed with 1,194 tracks and 91 vias.
It is built around the R-745.0P, DS2482S-100+T&R and AMC1100DWV, with the MS560702BA03-50, TSYS01 and MAX14850AEE+ among its other parts. Its parts include 34 resistors, 29 capacitors, 22 ICs, 22 connectors and 15 diodes.
Main components
11
R-745.0P
SIP,32.2x9.1mm1 4A 5V 6.5V~28V 95% Short Circuit Protection、Automatic fault recovery、Overload protection、Programmable output voltage SIP,32.2x9.1mm DC-DC Power Modules ROHSRECOM PowerDC-DC Power Modules
DS2482S-100+T&R
SOIC-8-40℃~+85℃ 3.3V、5V 750uA I2C SOIC-8 Interface - Specialized ROHSMaxim Integrated (Analog Devices)Interface - SpecializedAMC1100DWV
SOIC-8-40℃~+105℃ 100kHz 2.5kV/us 200uV 3005 8 Differential Isolated ΔΣ (Sigma-Delta) modulator、Full-differential topology SOIC-8 Isolation Amplifiers ROHSTexas InstrumentsIsolation Amplifiers
MS560702BA03-50
SMD-8P-40℃~+85℃ 1.5mbar 1.8V~3.6V 140nA 1Kpa~1.2bar I2C、SPI Yes SMD-8P Pressure Sensors ROHSTE ConnectivityPressure SensorsTSYS01
QFN-16_4x4mm- New Arrivals ROHSTE ConnectivityTemperature Sensors
MAX14850AEE+
SSOP-16-150mil-40℃~+125℃ 1.5kV/us 2Mbps、50Mbps 30ns 3V~5.5V 3V~5.5V 4 4 600 High Level SSOP-16-150mil Digital Isolators ROHSMaxim Integrated (Analog Devices)Digital Isolators
RTE24024
DIP,12.7x29mm-40℃~+85℃ 12.7mm 2 Form C: 2C (DPDT-CO) 24V 29mm 400V@AC 6ms 8A 8ms AgNi DIP,12.7x29mm Power Relays ROHSTE ConnectivityPower RelaysTL783CKTTRG3
DDPAK-3(TO-263-3)0℃~+125℃@(Tj) 1 1.25V~125V 125V 700mA 76dB@(120Hz) Adjustable Over Current Protection、Short Circuit Protection、Thermal shutdown Positive DDPAK-3(TO-263-3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LM1117MP-3.3/NOPB
SOT-223-40℃~+125℃@(Tj) 1 1.2V@(800mA) 15V 3.3V 5mA 75dB@(120Hz) 800mA Fixed Over Current Protection、Thermal shutdown Positive SOT-223-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BSS84
SOT-23-55℃~+150℃ 1 P-Channel 130mA 2.8pF 24.6pF 2V 3.2Ω@5V 300mW 4.7pF 50V 590pC@10V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsBAS16
SOT-231.25V@150mA 100V 215mA 250mW 4A 4ns 500nA@80V Independent SOT-23 Switching Diodes ROHSNexperiaSwitching Diodes
README
README.mdelec-pcb
All PCB designs for rLoop in Altium Designer 13 format.
Altium Viewer License is needed: http://www.altium.com/altium-designer-viewer CAD files in Inventor 2013 format and .step.
Parts
152| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100n / 50V / 10% / SMD 0603 | Capacitors_SMD:C_0603 | C4, C5, C6, C7, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22 |
| 7 | 3-641215-3 | rLoop_Footprints:3-641215-3_3Pin_Latching_Header | J8, J16, J17, J18, J19, J20, J21 |
| 7 | BSS84 | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7 |
| 7 | DS2482S-100+T&R | SMD_Packages:SOIC-8-N | U3, U4, U5, U8, U9, U10, U11 |
| 7 | EL-17-21VGC/TR8 | rLoop_Footprints:LED_0805 | D1, D2, D8, D10, D11, D12, D14 |
| 7 | TE_3-641119-2 | rLoop_Footprints:3-641119-2_TE_2P_MTA156_HDR | J1, J2, J9, J13, J14, J15, P1 |
| 4 | 100nF / 50V / 10% / SMD 0603 | Capacitors_SMD:C_0603 | C27, C28, C29, C30 |
| 4 | 10K / .1 W / 1% / SMD 0603 | Resistors_SMD:R_0603 | R21, R22, R23, R24 |
| 4 | 200 nF / 50V / SMD 0603 | Capacitors_SMD:C_0603 | C23, C24, C25, C26 |
| 4 | 2K / .1 W / 1% / SMD 0603 | Resistors_SMD:R_0603 | R17, R18, R19, R20 |
| 4 | 4.7K / 0.1W / 1% / SMD 0603 | Resistors_SMD:R_0603 | R6, R7, R8, R9 |
| 2 | 10K / .1W / 1% / SMD 0603 | Resistors_SMD:R_0603 | R11, R12 |
| 2 | 1K / 0.75W / 5% / 400V / SMD 2010 | Resistors_SMD:R_2010 | R14, R16 |
| 2 | 1K0 / 0.063W / 1% / SMD 0603 | Resistors_SMD:R_0603 | R30, R31 |
| 2 | 1uF / 50V / 10% / SMD 0805 | Capacitors_SMD:C_0805 | C2, C9 |
| 2 | 2.2K / 0.1W / 1% / SMD 0603 | Resistors_SMD:R_0603 | R1, R2 |
| 2 | 220R / 0.25W / 1% / SMD 0805 | Resistors_SMD:R_0805 | R26, R28 |
| 2 | 22uF / 16V / 10% / SMD TC3528 | Capacitors_Tantalum_SMD:CP_Tantalum_Case-T_EIA-3528-12_Reflow | C8, C10 |
| 2 | 300K / 0.5W / 1% / SMD 1206 | Resistors_SMD:R_1206 | R13, R15 |
| 2 | 330uF / 35V / 20% / SMD 10x10 | Capacitors_SMD:CP_Elec_10x10 | C1, C3 |
| 2 | 50 / .1 W / 10% / SMD 0603 | Resistors_SMD:R_0603 | R29, R33 |
| 2 | 82R0 / 0.25W / 1% / SMD 0805 | Resistors_SMD:R_0805 | R25, R27 |
| 2 | AMC1100DWV | rLoop_Footprints:amc1100_SOIC8 | U17, U18 |
| 2 | BAS16 | Diodes_SMD:D_SOT-23_ANK | D7, D13 |
| 2 | CONN_01X04 | rLoop_Footprints:22-04-1041_Molex_4_Pin_Header_2.50mm | J11, J12 |
| 2 | FES10G | rLoop_Footprints:TO-277A_SMPC | D3, D4 |
| 2 | Keystone_3544-2 | rLoop_Footprints:Keystone_3544-2 | J3, J4 |
| 2 | MAX14850AEE+ | Housings_SSOP:QSOP-16_3.9x4.9mm_Pitch0.635mm | U13, U14 |
| 2 | NUD3124LT1G | TO_SOT_Packages_SMD:SOT-23 | U19, U21 |
| 2 | RTE24024 | rLoop_Footprints:RTE24024 | U20, U22 |
| 2 | TL783CKTTR | rLoop_Footprints:tl783ckttr | U15, U16 |
| 1 | 100 / .1W / 10% / SMD 0603 | Resistors_SMD:R_0603 | R10 |
| 1 | 1N4004 | rLoop_Footprints:D_DO-201_P15.24mm_Horizontal | D9 |
| 1 | 1N4004 | rLoop_Footprints:1N4004 | D15 |
| 1 | 2.2K / 0.1W / 10% / SMD 0603 | Resistors_SMD:R_0603 | R3 |
| 1 | 2920L300/15DR - 3A IH / 5A IT | rLoop_Footprints:2920L300_15DR | F1 |
| 1 | 300 / 0.1W / 10% / SMD 0603 | Resistors_SMD:R_0603 | R5 |
| 1 | 4.7k / .1 W / 10% / SMD 0603 | Resistors_SMD:R_0603 | R32 |
| 1 | 4.7k / .1W / 10% / SMD 0603 | Resistors_SMD:R_0603 | R34 |
| 1 | 5-146130-9 | rLoop_Footprints:Booster1_J4_J2 | J7 |
| 1 | 5-146130-9 | rLoop_Footprints:Booster1_Header_J1_J3 | J5 |
| 1 | 5-534998-7 | Pin_Headers:Pin_Header_Straight_2x07_Pitch2.54mm | J10 |
| 1 | 500 / 0.1W / 10% / SMD 0603 | Resistors_SMD:R_0603 | R4 |
| 1 | 826926-2 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J6 |
| 1 | BMS_Outline | rLoop_Footprints:BMS_Outline | BMS_Outline |
| 1 | IN4004 | rLoop_Footprints:D_DO-201_P15.24mm_Horizontal | D6 |
| 1 | LM1117MP-3.3/NOPB | TO_SOT_Packages_SMD:SOT-223 | U1 |
| 1 | MS5607-02BA03 | rLoop_Footprints:ms5607-02ba03 | U7 |
| 1 | NCV8405ADTRKG | TO_SOT_Packages_SMD:SOT-223 | U12 |
| 1 | Power_Node_Mounting_Holes | rLoop_Footprints:Power_Node_Mounting_Holes | Power_Node_Mounting_Holes |
| 1 | R-745.0P | rLoop_Footprints:R-745.0P | U2 |
| 1 | RM57_Launchpad_Outline | rLoop_Footprints:RM57_Launchpad_Outline | RM_57_Outline |
| 1 | RM57_Mounting_Holes | rLoop_Footprints:RM57_Mounting_Hole | RM57_Mounting_Holes |
| 1 | SMF6.5A / SOD-123 | Diodes_SMD:D_SOD-123 | D5 |
| 1 | TSYS01 | rLoop_Footprints:QFN16_4x4 | U6 |
The 134 most common of 152 parts.
Questions
How big is the POWER NODE V2 PCB?
It measures 198.8 × 164.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the POWER NODE V2 use?
152 parts, built around the R-745.0P, DS2482S-100+T&R, AMC1100DWV and MS560702BA03-50. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the POWER NODE V2 KiCad files?
From the rLoopTeam/elec-pcb repository on GitHub, at the commit this page was made from: the board is POWER_NODE_V2/POWER_NODE_V2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the POWER NODE V2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask rLoopTeam before reusing the design.
More from rLoopTeam/elec-pcb
1Similar boards
- 2 layers76 × 76 mm
- 4 layers85.2 × 93.7 mm
- 2 layers
- 6 layers235.1 × 213.7 mm
Quiver PT3 Main PCB rounded
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
164 parts617CERN-OHL-S-2.0 - 4 layers210.6 × 220 mm
CMAIN PCB
Arrow-air/project-caribou
Project Caribou documentation, designs, and project artifacts.
248 parts177CERN-OHL-S-2.0 - 2 layers47.5 × 9.5 mm
Tsys01 singleside
eddyem/tsys01
BTA primary mirror thermal monitoring using STM32 and TSYS01
7 parts4GPL-3.0 - 2 layers28 × 28 mm
- 2 layers70.6 × 70.6 mm
ADCoctoSPI01
mlab-modules/ADCoctoSPI01
Octal input high-speed ADC with serial LVDS output.
80 parts3GPL-3.0