Skip to the content
2 layersIso nv dac, the printed circuit board in 3D
Copper layers
2
Thickness
1.6 mm
Parts
35
Nets
65
Pads
154
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 7 (file 20221018)
Created
18 Aug 2024
Updated
8 Nov 2025

Overview

Iso nv dac is an open-source printed circuit board by ethanjamesauto, from the ethanjamesauto/modular_8bit_computer repository on GitHub. It is a 2-layer board with 35 parts on 65 nets.

It is built around the AMC1100DWV, LM358 and 74HC04D, with the 74LS161DC, 74LVC1G32Z and 74LVC1G80GW among its other parts. Its parts include 15 resistors, 11 ICs, 6 capacitors, 2 diodes and 1 transistor. It belongs with the audio and music boards of this library.

Main components

8

README

README.md

Modular 8-bit Computer

This is the repository for an 8-bit computer system that is built using cards with a standardized interface.

Here's an example of a card:

Current Bus Specification

verilog
// The main bus wires (32+8=40 wires total)
// On the bus connector, all buses have LSBs closer to the power pins and MSBs farther away
wire VCC_5V;
wire GND;
wire clk;			      // generated by motherboard clock generator
wire rst_n;			    // probably a button on the motherboard
wire VCC_3V3;
wire we_n;			      // active LOW
wire oe_n;			      // active LOW
wire int_n;			    // pulled up by motherboard; driven down by any peripheral (could be used for interrupts)
wire [7:0] data;
wire [15:0] addr;	  // 64k address space is suppored by default. More address bits may be added later
wire [7:0] aux_bus;

Parts

35
QtyValueFootprintReferences
1410kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15
6CCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C2, C3, C4, C5, C6
2LEDLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD1, D2
1100kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR2
12N7002Package_TO_SOT_SMD:SOT-23Q1
174HC04Package_SO:SOIC-14_3.9x8.7mm_P1.27mmU10
174LS161Package_SO:SOIC-16_4.55x10.3mm_P1.27mmU5
174LVC1G32Package_TO_SOT_SMD:SOT-23-5_HandSolderingU6
174LVC1G80Package_TO_SOT_SMD:SOT-23-5_HandSolderingU7
1AMC1100DWVPackage_SO:SOIC-8_7.5x5.85mm_P1.27mmU11
1LM358Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU9
1MCP33141DPackage_SO:MSOP-10_3x3mm_P0.5mmU2
1NE555DPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU4
1TPS76318Package_TO_SOT_SMD:SOT-23-5U8
1~Package_SO:SOIC-16_4.55x10.3mm_P1.27mmU3
1~Package_SO:MSOP-10_3x3mm_P0.5mmU1

More from ethanjamesauto/modular_8bit_computer

12
  • 2 layers229.9 × 83.8 mmSmaller card, the printed circuit board in 3D

    Smaller card

    ethanjamesauto/modular_8bit_computer

    246 parts2
  • 2 layers222.3 × 127 mmMotherboard, the printed circuit board in 3D

    Motherboard

    ethanjamesauto/modular_8bit_computer

    208 parts2
  • 2 layers86.4 × 53.8 mmSsr load switch, the printed circuit board in 3D

    Ssr load switch

    ethanjamesauto/modular_8bit_computer

    201 parts2
  • 2 layers229.9 × 86.4 mm93c76 revision two, the printed circuit board in 3D

    93c76 revision two

    ethanjamesauto/modular_8bit_computer

    168 parts2
  • 2 layers2.8 × 6.6 mmFish, the printed circuit board in 3D

    Fish

    ethanjamesauto/modular_8bit_computer

    166 parts2
  • 2 layers111.8 × 77.2 mmHp common slot, the printed circuit board in 3D

    Hp common slot

    ethanjamesauto/modular_8bit_computer

    153 parts2
  • 2 layers48.3 × 48.3 mmEddie bldc, the printed circuit board in 3D

    Eddie bldc

    ethanjamesauto/modular_8bit_computer

    138 parts2
  • 2 layers104.1 × 50.8 mmFuck it psu-2, the printed circuit board in 3D

    Fuck it psu-2

    ethanjamesauto/modular_8bit_computer

    75 parts2

Similar boards

  • 4 layers85.2 × 93.7 mmOpqbox3, the printed circuit board in 3D

    Opqbox3

    openpowerquality/opq

    Master repository for all OPQ services

    51 parts18
  • 2 layers198.8 × 164.8 mmPOWER NODE V2, the printed circuit board in 3D

    POWER NODE V2

    rLoopTeam/elec-pcb

    All PCB designs for rLoop in Altium Designer 13 format.

    152 parts5
  • 2 layers131.9 × 164.6 mmCft alu, the printed circuit board in 3D

    Cft alu

    alexiosc/cft

    The CFT homebrew minicomputer

    138 parts6GPL-3.0
  • 4 layers142 × 119.7 mmQMTech MiSTeX, the printed circuit board in 3D

    QMTech MiSTeX

    MiSTeX-devel/MiSTeX-hardware

    Hardware for MiSTeX

    247 parts73
  • 2 layers25 × 40 mmPmodUsbUlpi, the printed circuit board in 3D

    PmodUsbUlpi

    twam/PmodUsbUlpi

    Pmod™ Compatible USB ULPI PHY

    22 parts16
  • 2 layers62 × 66.4 mmLt6c pcb, the printed circuit board in 3D

    Lt6c pcb

    lambdakb/trackball-lt6c

    LT6C 6 Keys Trackball

    19 parts9CERN-OHL-S-2.0
  • 2 layers62 × 84 mmLt7dk pcb, the printed circuit board in 3D

    Lt7dk pcb

    lambdakb/trackball-lt7dk

    LT7DK PMW3360 Trackball Development Kit

    54 parts2CERN-OHL-S-2.0
  • 4 layers48.5 × 25 mmWIFI IMU, the printed circuit board in 3D

    WIFI IMU

    nikit6000/WirelessIMU

    A board for wireless motion tracking

    70 partsGPL-2.0

Questions

What parts does the Iso nv dac use?

35 parts, built around the AMC1100DWV, LM358, 74HC04D and 74LS161DC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Iso nv dac KiCad files?

From the ethanjamesauto/modular_8bit_computer repository on GitHub, at the commit this page was made from: the board is iso_nv_dac/iso_nv_dac.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Iso nv dac design in my own project?

Its repository states no licence, so its author keeps all rights: ask ethanjamesauto before reusing the design.