Skip to the content
12345

TPS76318DBV

Texas InstrumentsExtended

-40℃~+125℃ 1 1.8V 10V 140uV 150mA 60dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/TPS76318DBV
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-23-5
Pins
5
In stock
3,013 at JLCPCB (C7099)
Used on
9 open-source boards

Overview

The TPS76318DBV is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃ 1 1.8V 10V 140uV 150mA 60dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:TPS76318, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 3,013 are in stock at JLCPCB (part C7099). 9 open-source boards in 7 repositories on GitHub use it.

Symbol

1VIN2GND3EN5VOUT
Regulator_Linear:TPS76318From KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

From the datasheet

18
Supply, least
2.7 V · VIN, recommended operating min · p. 4
Supply, most
10 V · VIN, recommended operating max · p. 4
Supply, absolute maximum
10 V · VIN, legacy chip absolute max · p. 4
Supply, absolute maximum
18 V · VIN, new chip absolute max · p. 4
Junction, hottest
150 °C · Operating junction temperature absolute max · p. 4
Gives
150 mA · IOUT, recommended continuous output max · p. 4
Takes working
85 µA · Legacy chip ground current typical, IOUT = 1mA to 150mA, TJ = 25°C · p. 7
Takes working
765 µA · New chip ground current typical, IOUT = 1mA to 150mA, TJ = 25°C · p. 7
Takes asleep
500 nA · Legacy chip standby current typical, EN < 0.5V, TJ = 25°C · p. 8
Takes asleep
1.25 µA · New chip standby current typical, EN < 0.15V, TJ = 25°C · p. 8
Current limit
800 mA · Legacy chip output current limit typical, VOUT = 0V, TJ = 25°C · p. 7
Dropout
180 mV · New chip dropout typical, IOUT = 150mA, TJ = 25°C · p. 9
Junction to air (SOT-23 (DBV))
205.3 K/W · Legacy chip junction-to-ambient · p. 5
Junction to air (SOT-23 (DBV))
178.6 K/W · New chip junction-to-ambient · p. 5
Junction to case (SOT-23 (DBV))
125.1 K/W · Legacy chip junction-to-case top · p. 5
Junction to case (SOT-23 (DBV))
77.9 K/W · New chip junction-to-case top · p. 5
Junction to board (SOT-23 (DBV))
34.6 K/W · Legacy chip junction-to-board · p. 5
Junction to board (SOT-23 (DBV))
47.2 K/W · New chip junction-to-board · p. 5

What it is and has

3
Protection
Thermal shutdown and overcurrent limitation · p. 1
Protection
Active over-shoot pulldown protection, new chip · p. 1
Package
5-pin SOT-23 (DBV) · p. 1

Around it

3
cap 1µF or larger
between IN and GND; Input supply capacitor specified in the pin description. · p. 3
cap 2.2µF or larger
between OUT and GND; Output capacitor; the note requires effective capacitance at the pin greater than 1uF. · p. 3
cap 4.7 µF
between OUT and GND; Minimum recommended output capacitance for the legacy chip; recommended ESR is 0.3Ω to 10Ω. · p. 4

Specifications

67
ParameterConditionsAs printedPage
Voltage VINFor legacy chip; all voltages with respect to GNDmin -0.3 · max 10 V4
Voltage VINFor new chip; all voltages with respect to GNDmin -0.3 · max 18 V4
Voltage VOUTAll voltages with respect to GNDmin -0.3 · max 7 V4
Voltage range at EN (for legacy chip) ENFor legacy chip; maximum = VIN + 0.3 Vmin -0.3 V4
Voltage range at EN (for new chip) ENFor new chipmin -0.3 · max 18 V4
Operating junction (TJ) TJmin -40 · max 150 °C4
Storage (TSTG) TSTGmin -65 · max 150 °C4
Electrostatic discharge V(ESD)New chip; Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pinsmin -2000 · max 2000 V4
Electrostatic discharge V(ESD)Legacy chip; Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pinsmin -2000 · max 2000 V4
Electrostatic discharge V(ESD)New chip; Charged device model (CDM), per JEDEC specification JESD22C101, all pinsmin -1000 · max 1000 V4
Electrostatic discharge V(ESD)Legacy chip; Charged device model (CDM), per JEDEC specification JESD22C101, all pinsmin -250 · max 250 V4
Input voltage VINmin 2.7 · max 10 V4
Enable voltage (for new chip) ENFor new chipmin 0 · max 10 V4
Output voltage (for new chip) VOUTFor new chipmin 1.2 · max 6.5 V4
Output current IOUTmin 0 · max 150 mA4
Output capacitance (for legacy chip) COUTFor legacy chipmin 4.7 uF4
Output capacitance (for new chip) COUTFor new chip; nominal value in typ fieldmin 1 · typ 2.2 · max 220 uF4
Output capacitor ESR (for legacy chip) COUT ESRFor legacy chipmin 0.3 · max 10 Ω4
Output capacitor ESR (for new chip) COUT ESRFor new chipmin 0 · max 1 Ω4
Input capacitance (for new chip) CINFor new chip; nominal value in typ fieldtyp 0.47 uF4
Junction temperature (for legacy chip) TJFor legacy chipmin -40 · max 125 °C4
Junction temperature (for new chip) TJFor new chipmin -40 · max 150 °C4
Junction-to-ambient thermal resistance RθJALegacy chip; SOT-23 (DBV), 5 PINStyp 205.3 °C/W5
Junction-to-ambient thermal resistance RθJANew chip; SOT-23 (DBV), 5 PINStyp 178.6 °C/W5
Junction-to-case (top) thermal resistance RθJC(top)Legacy chip; SOT-23 (DBV), 5 PINStyp 125.1 °C/W5
Junction-to-case (top) thermal resistance RθJC(top)New chip; SOT-23 (DBV), 5 PINStyp 77.9 °C/W5
Junction-to-board thermal resistance RθJBLegacy chip; SOT-23 (DBV), 5 PINStyp 34.6 °C/W5
Junction-to-board thermal resistance RθJBNew chip; SOT-23 (DBV), 5 PINStyp 47.2 °C/W5
Junction-to-top characterization parameter ΨJTLegacy chip; SOT-23 (DBV), 5 PINStyp 15.2 °C/W5
Junction-to-top characterization parameter ΨJTNew chip; SOT-23 (DBV), 5 PINStyp 15.9 °C/W5
Junction-to-board characterization parameter ΨJBLegacy chip; SOT-23 (DBV), 5 PINStyp 33.8 °C/W5
Junction-to-board characterization parameter ΨJBNew chip; SOT-23 (DBV), 5 PINStyp 46.9 °C/W5
Quiescent current (GND current) IQFor legacy chip; IOUT = 1mA to 150mA, TJ = 25°Ctyp 85 · max 100 uA7
Quiescent current (GND current) IQFor legacy chip; IOUT = 1mA to 150mAmax 140 uA7
Quiescent current (GND current) IQFor new chip; IOUT = 0mAtyp 65 · max 125 uA7
Quiescent current (GND current) IQFor new chip; IOUT = 1mA to 150mA, TJ = 25°Ctyp 765 · max 890 uA7
Quiescent current (GND current) IQFor new chip; IOUT = 1mA to 150mAmax 1060 uA7
Output voltage line regulation (ΔVOUT/VOUT) ΔVOUT(ΔVOUT)For legacy chip; VOUT(NOM) +1.0V ≤ VIN ≤ 10V, VIN ≥ 3.5V, TJ = 25°Ctyp 0.04 · max 0.07 %/V7
Output voltage line regulation (ΔVOUT/VOUT) ΔVOUT(ΔVOUT)For legacy chip; VOUT(NOM) +1.0V ≤ VIN ≤ 10V, VIN ≥ 3.5Vmax 0.1 %/V7
Output voltage line regulation (ΔVOUT/VOUT) ΔVOUT(ΔVOUT)For new chip; VOUT(NOM) +1.0V ≤ VIN ≤ 10V, VIN ≥ 3.5V, TJ = 25°Cmax 0.01 %/V7
Output voltage line regulation (ΔVOUT/VOUT) ΔVOUT(ΔVOUT)For new chip; VOUT(NOM) +1.0V ≤ VIN ≤ 10V, VIN ≥ 3.5Vmax 0.01 %/V7
Output current limit ICLFor legacy chip; VOUT = 0V, TJ = 25℃min 0.5 · typ 0.8 · max 1.5 A7
Output current limit ICLFor new chip; VOUT = 0Vtyp 0.8 · max 1.05 A7
Standby current ISTANDBYFor legacy chip; EN < 0.5V, TJ = 25℃typ 0.5 · max 1 uA8
Standby current ISTANDBYFor legacy chip; EN < 0.5Vmax 2 uA8
Standby current ISTANDBYFor new chip; EN < 0.15V, TJ = 25℃typ 1.25 uA8
Standby current ISTANDBYFor new chip; EN < 0.15Vtyp 1.12 · max 2.75 uA8
High level enable input voltage ENFor legacy chiptyp 1.4 · max 2 V8
Low level enable input voltage ENFor legacy chipmin 0.5 · typ 1.2 V8
High level enable input voltage ENFor new chiptyp 0.85 · max 1.6 V8
Low level enable input voltage ENFor new chipmin 0.15 · typ 0.72 V8
Power-supply ripple rejection PSRRFor legacy chip; COUT = 10uF, f = 1kHz, TJ = 25 ℃typ 60 dB8
Power-supply ripple rejection PSRRFor new chip; COUT = 4.7uF, f = 1kHz, TJ = 25 ℃typ 58 dB8
Input current (EN) IENFor legacy chip; EN = 0Vtyp -0.01 · max -0.5 uA8
Input current (EN) IENFor legacy chip; EN = VINtyp -0.01 · max -0.5 uA8
Input current (EN) IENFor new chip; EN = 0Vtyp -0.35 · max -0.7 uA8
Input current (EN) IENFor new chip; EN = VINtyp 0.008 · max 0.8 uA8
Dropout voltage VDOTPS763xx, for new chip; IOUT = 0mA, TJ = 25℃typ 1 · max 2.75 mV9
Dropout voltage VDOTPS763xx, for new chip; IOUT = 1mA, TJ = 25℃typ 11.5 · max 14 mV9
Dropout voltage VDOTPS763xx, for new chip; IOUT = 50mA, TJ = 25℃typ 120 · max 145 mV9
Dropout voltage VDOTPS763xx, for new chip; IOUT = 50mAmax 184 mV9
Dropout voltage VDOTPS763xx, for new chip; IOUT = 75mA, TJ = 25℃typ 135 · max 155 mV9
Dropout voltage VDOTPS763xx, for new chip; IOUT = 75mAmax 195 mV9
Dropout voltage VDOTPS763xx, for new chip; IOUT = 100mA, TJ = 25℃typ 145 · max 165 mV9
Dropout voltage VDOTPS763xx, for new chip; IOUT = 100mAmax 215 mV9
Dropout voltage VDOTPS763xx, for new chip; IOUT = 150mA, TJ = 25℃typ 180 · max 198 mV9
Dropout voltage VDOTPS763xx, for new chip; IOUT = 150mAmax 254 mV9

Pins, by the datasheet

5
1 IN
Input supply; connect a capacitor of 1uF or larger to ground. · p. 3
2 GND
Ground. · p. 3
3 EN
High enables the LDO and low disables it; tie to VIN if unused for the new chip. · p. 3
4 NC
No connection for the fixed-voltage option. · p. 3
5 OUT
Regulator output; connect a capacitor of 2.2uF or larger to ground. · p. 3

Open-source boards using it

9See all 9
  • 4 layers142 × 119.7 mmQMTech MiSTeX, the printed circuit board in 3D

    QMTech MiSTeX

    MiSTeX-devel/MiSTeX-hardware

    Hardware for MiSTeX

    247 parts73
  • 2 layers25 × 40 mmPmodUsbUlpi, the printed circuit board in 3D

    PmodUsbUlpi

    twam/PmodUsbUlpi

    Pmod™ Compatible USB ULPI PHY

    22 parts16
  • 2 layers62 × 66.4 mmLt6c pcb, the printed circuit board in 3D

    Lt6c pcb

    lambdakb/trackball-lt6c

    LT6C 6 Keys Trackball

    19 parts9CERN-OHL-S-2.0
  • 2 layers62 × 84 mmLt7dk pcb, the printed circuit board in 3D

    Lt7dk pcb

    lambdakb/trackball-lt7dk

    LT7DK PMW3360 Trackball Development Kit

    54 parts2CERN-OHL-S-2.0
  • 4 layers48.5 × 25 mmWIFI IMU, the printed circuit board in 3D

    WIFI IMU

    nikit6000/WirelessIMU

    A board for wireless motion tracking

    70 partsGPL-2.0
  • 2 layers2.8 × 6.6 mmFish, the printed circuit board in 3D

    Fish

    ethanjamesauto/modular_8bit_computer

    166 parts2
  • 2 layersIso nv dac, the printed circuit board in 3D

    Iso nv dac

    ethanjamesauto/modular_8bit_computer

    35 parts2

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TPS76318DBV?

Yes. The symbol is Regulator_Linear:TPS76318 and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS76318DBV?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the TPS76318DBV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS76318DBV?

JLCPCB lists it as part C7099, with 3,013 in stock; the sellers' links on this page open their listings.

What can replace the TPS76318DBV?

Parts like it in the library: the AP2112K-1.8TRG1 by Diodes Incorporated, the ME6211C18M5G-N by MICRONE, the RT9078-18GJ5 by RICHTEK and the LP5907MFX-1.8 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS76318DBV?

9 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.