2 layers198.8 × 164.8 mm
2 layers99 × 153 mm
RLoop BMS v2
rLoopTeam/elec-pcb5All PCB designs for rLoop in Altium Designer 13 format.
- Size
- 99 × 153 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 442
- Nets
- 225
- Pads
- 1,008
- Tracks, vias
- 2,183, 95
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 18 Jul 2016
- Updated
- 26 Aug 2017
Overview
RLoop BMS v2 is an open-source printed circuit board by rLoopTeam, from the rLoopTeam/elec-pcb repository on GitHub. It is a 2-layer board of 99 × 153 mm with 442 parts on 225 nets, routed with 2,183 tracks and 95 vias.
It is built around the MIC5282-5.0YMM, VOS618A-2X001T and PMV20ENR, with the TBH25P2R00JE, MP930-2.00-1% and NTR4170N among its other parts. Its parts include 124 resistors, 77 capacitors, 54 diodes, 19 transistors and 5 ICs. It belongs with the power boards of this library.
Main components
6
MIC5282-5.0YMM
MSOP-8-40℃~+125℃ 1 11uA 120V 3V@(50mA) 50mA 5V Fixed Positive MSOP-8 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
VOS618A-2X001T
SOIC-4-175mil-55℃~+110℃ 1 1.1V 120mV@1mA,0.25mA 3.75kV 50% 50mA 5us 600% 6V 7us 80V Phototransistor SOIC-4-175mil Transistor, Photovoltaic Output Optoisolators ROHSVishay IntertechnologyTransistor, Photovoltaic Output Optoisolators
PMV20ENR
SOT-23-55℃~+150℃ 1 N-channel 1.2W 10.8nC@10V 21mΩ@10V 30V 35pF 435pF 7.6A SOT-23 MOSFETs ROHSNexperiaMOSFETs
TBH25P2R00JE
TO-220AC-55℃~+150℃ 25W 2Ω Thick Film Resistor ±200ppm/℃ ±5% TO-220AC Through Hole Resistors ROHSOhmiteThrough Hole ResistorsMP930-2.00-1%
TO-220-20ppm/℃~+80ppm/℃ -55℃~+150℃ 2Ω 30W Thick Film Resistor ±1% TO-220 Through Hole Resistors ROHSCaddockThrough Hole ResistorsNTR4170N
SOT-23-55℃~+150℃ 1 N-channel 1.25W 1.4V 110mΩ@2.5V 3.1A 30V 37.1pF 4.76nC@4.5V 432pF N-Channel SOT-23 MOSFETs ROHSonsemiMOSFETs
README
README.mdelec-pcb
All PCB designs for rLoop in Altium Designer 13 format.
Altium Viewer License is needed: http://www.altium.com/altium-designer-viewer CAD files in Inventor 2013 format and .step.
Parts
442| Qty | Value | Footprint | References |
|---|---|---|---|
| 52 | 1K0 / 0.063W / 1% / SMD 0603 | Resistors_SMD:R_0603 | R1, R2, R10, R11, R12, R13, R14, R15, R16, R20, R21, R22, R23, R24, R25, R26 +36 |
| 36 | SMF6.5A / SOD-123 | Diodes_SMD:D_SOD-123 | D19, D20, D21, D22, D23, D24, D25, D26, D27, D28, D29, D30, D31, D32, D33, D34 +20 |
| 18 | 100 nF / 50V/ 10% / SMD 0603 | Capacitors_SMD:C_0603 | C10, C11, C12, C13, C21, C22, C23, C24, C25, C26, C34, C35, C36, C37, C38, C39 +2 |
| 18 | 150 | Resistors_SMD:R_0603 | R33, R34, R35, R36, R37, R38, R58, R59, R60, R61, R62, R63, R83, R84, R85, R86 +2 |
| 18 | EL-17-21VGC/TR8 | LEDs:LED_0805 | D1, D2, D3, D4, D5, D6, D7, D10, D11, D12, D13, D14, D15, D16, D17, D18 +2 |
| 18 | PMV20ENR | rLoop_Footprints:PMV20ENR-TO_236AB | Q2, Q3, Q4, Q5, Q6, Q7, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19 +2 |
| 12 | .1 uF / 50v / SMD 0603 | Capacitors_SMD:C_0603 | C6, C7, C14, C15, C16, C17, C30, C31, C33, C40, C41, C42 |
| 12 | 1M / 0.063W / 1% / SMD 0603 | Resistors_SMD:R_0603 | R95, R96, R97, R98, R99, R100, R101, R102, R103, R104, R105, R106 |
| 12 | TBH25P2R00JE | rLoop_Footprints:2-OHM-TO-220-TBH25P2R00JE | R39, R40, R41, R42, R43, R44, R89, R90, R91, R92, R93, R94 |
| 10 | 33 pF / 50V/ 10% / SMD 0603 | Capacitors_SMD:C_0603 | C67, C68, C69, C71, C72, C73, C74, C75, C76, C77 |
| 6 | .047 uF / 50V/ 10% / SMD 0603 | Capacitors_SMD:C_0603 | C58, C59, C60, C61, C62, C63 |
| 6 | .1 uF / 50V / SMD 0603 | Capacitors_SMD:C_0603 | C18, C19, C20, C27, C28, C29 |
| 6 | .1 uF / 50V/ 10% / SMD 0603 | Capacitors_SMD:C_0603 | C2, C4, C44, C46, C49, C50 |
| 6 | 1.82k / 0.063W / 1% / SMD0603 | Resistors_SMD:R_0603 | R116, R117, R118, R119, R121, R123 |
| 6 | 10k / 1% / 3454K / SMD0603 | Resistors_SMD:R_0603 | TH1, TH2, TH3, TH4, TH5, TH6 |
| 6 | 1M / .063W / 1% / SMD 0603 | Resistors_SMD:R_0603 | R17, R18, R19, R32, R57, R82 |
| 6 | MP930-2.00-1% | rLoop_Footprints:2-OHM-TO-220-TBH25P2R00JE | R64, R65, R66, R67, R68, R69 |
| 5 | 100K0 / 0.063W / 5% / SMD 0603 | Resistors_SMD:R_0603 | R107, R108, R109, R110, R111 |
| 5 | 2.2uF / 50V/ 10% / SMD 0603 | Capacitors_SMD:C_0603 | C47, C48, C51, C56, C57 |
| 4 | 2.2 uF / 50V/ 10% / SMD 0603 | Capacitors_SMD:C_0603 | C1, C3, C43, C45 |
| 3 | 10 uF / 10V/ 10% / SMD 0603 | Capacitors_SMD:C_0603 | C5, C53, C54 |
| 3 | bq76PL536A_HTQFP | rLoop_Footprints:bq76pl536a | U1, U2, U3 |
| 2 | 1-640445-0 | rLoop_Footprints:1-640445-0 | J2, J4 |
| 2 | 1.47k / 0.063W / 1% / SMD 0603 | Resistors_SMD:R_0603 | R112, R114 |
| 2 | 1.47k / 0.063W / 1% / SMD0603 | Resistors_SMD:R_0603 | R120, R122 |
| 2 | 1.82k / 0.063W / 1% / SMD 0603 | Resistors_SMD:R_0603 | R113, R115 |
| 2 | 100n / 50V / 10% / SMD 0603 | Capacitors_SMD:C_0603 | C32, C55 |
| 2 | 3.3 nF / 50V/ 10% / SMD 0603 | Capacitors_SMD:C_0603 | C66, C70 |
| 1 | .1uF / 100V / SMD0603 | Capacitors_SMD:C_0603 | C65 |
| 1 | .1uF / 50V/ 10% / SMD 0603 | Capacitors_SMD:C_0603 | C52 |
| 1 | 1241050-7 | rLoop_Footprints:Pin_Header_Straight_2x07_Pitch2.54mm_SMD_MIRROR | J1 |
| 1 | 1uF / 100V / SMD0603 | Capacitors_SMD:C_0603 | C64 |
| 1 | 270R / 0.1W / 5% / SMD 0603 | Resistors_SMD:R_0603 | R124 |
| 1 | LOGO | rLoop_Footprints:rLoop_Logo | G*** |
| 1 | MIC5282-5.0YMM | rLoop_Footprints:MIC5282 | U4 |
| 1 | NTR4170N | TO_SOT_Packages_SMD:SuperSOT-3 | Q1 |
| 1 | TE 3-641215-3 | rLoop_Footprints:3-641215-3_3Pin_Latching_Header | J3 |
| 1 | VOS618A-2X001T | rLoop_Footprints:VOS618A-2X001T | U5 |
The 290 most common of 442 parts.
Questions
How big is the RLoop BMS v2 PCB?
It measures 99 × 153 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RLoop BMS v2 use?
442 parts, built around the MIC5282-5.0YMM, VOS618A-2X001T, PMV20ENR and TBH25P2R00JE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RLoop BMS v2 KiCad files?
From the rLoopTeam/elec-pcb repository on GitHub, at the commit this page was made from: the board is RLOOP_BMS_V2/rLoop BMS v2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RLoop BMS v2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask rLoopTeam before reusing the design.
More from rLoopTeam/elec-pcb
1Similar boards
- 4 layers69.5 × 69.5 mm
Vibecheck mainboard
harrislab-brown/VibeCheck
VibeCheck is a low-cost and easy-to-use vibration measurement system developed for the course Vibration of Mechanical Systems (ENGN 1735/2735) at Brown University.
206 partsCC-BY-SA-4.0 - 4 layers85.6 × 54 mm
DCDCv9-3
Rootthecause/DCDC
An open source credit card sized DC/DC converter to convert up to 600 V to 24 V in a energy-, cost- and space efficient way.
216 parts161CERN-OHL-W-2.0 - 2 layers78.1 × 50.2 mm
- 8 layers153.7 × 88.9 mm
Link
oro-os/link
The Oro OS CI/CD pipeline including PCBs, CAD files, firmware and server infrastructure
381 parts14MIT - 2 layers73 × 38.1 mm
KbxLEDController-16ch
kbx81/kbxLEDController-16ch
kbx's 16-channel ESP-32 Powered LED Strip Controller
79 parts10 - 2 layers94 × 94 mm
- 4 layers54.5 × 18 mm
- 2 layers65 × 56 mm
