4 layers74.5 × 69.2 mm
4 layers50.8 × 87 mm
AFSElec
rice-eclipse/AFSElecECLIPSE: AFS
- Size
- 50.8 × 87 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 148
- Nets
- 131
- Pads
- 531
- Tracks, vias
- 1,167, 228
- Pours
- 27
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 21 Jan 2026
- Updated
- 7 Nov 2026
Overview
AFSElec is an open-source printed circuit board by rice-eclipse, from the rice-eclipse/AFSElec repository on GitHub. It is a 4-layer board of 50.8 × 87 mm with 148 parts on 131 nets, routed with 1,167 tracks and 228 vias.
It is built around the 74AHCT541D, AP62150WU and MMC5983MA, with the MS5611-01BA03, W25Q128JVSIQ and MSD-4-A among its other parts. Its parts include 48 capacitors, 35 resistors, 21 connectors, 14 ICs and 4 diodes. It belongs with the RP2350 boards of this library.
Main components
11
74AHCT541D
SO-20-300mil-40℃~+125℃ 4.5V~5.5V 5ns@5V,50pF 74AHCT 8 80uA 8mA 8mA Schmitt trigger Tri-State SO-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffer/Driver/Transceiver
AP62150WU
TSOT-23-6-40℃~+125℃ 1 1.3MHz 1.5A 135uA 4.2V~18V 800mV~7V Adjustable Buck Buck Built-in Yes TSOT-23-6 DC-DC Converters ROHSDiodes IncorporatedDC-DC Converters
MMC5983MA
LGA-16(3x3)-40℃~+105℃ 18bit 2.8V~3.6V 450uA I2C、SPI ±8Gs ±8Gs LGA-16(3x3) 3D Magnetic Sensors ROHSMEMSIC3D Magnetic Sensors
MS5611-01BA03
QFN-8(3x5)QFN-8(3x5) Pressure Sensors ROHSMEASPressure Sensors
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
MSD-4-A
SMDSMD SD Card / Memory Card Connector ROHSCUISD Card / Memory Card ConnectorTPS2121RUXR
VQFN-HR-12(2x2.5)-40℃~+125℃ 2.8V~22V 200uA 56mΩ VQFN-HR-12(2x2.5) ORing Controllers ROHSTexas InstrumentsBattery Management
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
ICM-45686
LGA-14(3x2.5)-40℃~+85℃ 1.71V~3.6V 16bit 2.2uA 8KB IMU (accelerometer + gyroscope) Motion event detection SPI、I2C X,Y,Z X,Y,Z ±32g ±4000dps LGA-14(3x2.5) Accelerometers ROHSTDK InvenSenseAccelerometers
KX134-1211
LGA-12(2x2)16bit Accelerometer I2C X,Y,Z ±8g 运动事件检测 LGA-12(2x2) Accelerometers ROHSROHM SemiconductorAccelerometers
ABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystals
README
README.mdThis is the official GitHub Repo for Rice ECLIPSE AFS.
Parts
148| Qty | Value | Footprint | References |
|---|---|---|---|
| 27 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C4, C10, C11, C12, C17, C21, C23, C24, C25, C28, C29, C30, C34, C38 +11 |
| 11 | TestPoint_Small | TestPoint:TestPoint_Pad_1.0x1.0mm | TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP13, TP14 |
| 8 | 100k | Resistor_SMD:R_0603_1608Metric | R15, R16, R20, R21, R23, R24, R28, R29 |
| 8 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7, J8, J10, J11, J14, J15, J16, J17 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric | R32, R33, R34, R35, R36, R37 |
| 6 | 10u | Capacitor_SMD:C_0805_2012Metric | C13, C20, C36, C40, C42, C50 |
| 6 | Conn_01x04_Socket | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J6, J9, J13, J18, J19, J26 |
| 5 | 1u | Capacitor_SMD:C_0805_2012Metric | C22, C31, C32, C33, C37 |
| 4 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C3, C14, C15, C16 |
| 4 | 5.1k | Resistor_SMD:R_0603_1608Metric | R7, R8, R9, R10 |
| 4 | Conn_01x02_Socket | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J27, J29, J30, J31 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO14580_Pad | H1, H2, H3, H4 |
| 4 | RED_LED | LED_SMD:LED_0805_2012Metric | D1, D2, D4, D5 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R5, R11, R12 |
| 3 | 3.3u | Inductors:AOTA-B201610S3R3-101-T(L_0806_2016metric) | L1, L2, L3 |
| 3 | 33 | Resistor_SMD:R_0603_1608Metric | R1, R2, R3 |
| 3 | 47k | Resistor_SMD:R_0603_1608Metric | R18, R22, R27 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric | R4, R17 |
| 2 | 100u | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm | C44, C45 |
| 2 | 15p | Capacitor_SMD:C_0603_1608Metric | C18, C19 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric | C35, C39 |
| 2 | 330 | Resistor_SMD:R_0603_1608Metric | R6, R25 |
| 2 | 3x4PinHeaderCase90deg | 3x4DupontCasing:3x4PinHeaderCase90deg | G1, G2 |
| 2 | AP62150WU | Package_TO_SOT_SMD:TSOT-23-6 | U12, U14 |
| 2 | LOGO | logos:ECLIPSELogo1 | G***, G*** |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1, SW2 |
| 2 | TPS2121RUXR | Package_DFN_QFN:Texas_VQFN-HR-12_2x2.5mm_P0.5mm | U9, U13 |
| 1 | 13k | Resistor_SMD:R_0603_1608Metric | R31 |
| 1 | 15k | Resistor_SMD:R_0603_1608Metric | R26 |
| 1 | 2m | Resistor_SMD:R_1206_3216Metric | R19 |
| 1 | 68k | Resistor_SMD:R_0603_1608Metric | R30 |
| 1 | 74AHCT541 | Package_SO:SSOP-20_4.4x6.5mm_P0.65mm | U15 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U11 |
| 1 | Conn_01x02_Pin | Connector_AMASS:AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J5 |
| 1 | ICM-45686 | Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm | U4 |
| 1 | INA219AxDCN | Package_TO_SOT_SMD:SOT-23-8 | U10 |
| 1 | KX134-1211 | Package_LGA:LGA-12_2x2mm_P0.5mm | U8 |
| 1 | MMC5983MA | Package_LGA:LGA-16_3x3mm_P0.5mm | U3 |
| 1 | MS5611-01BA | Package_LGA:LGA-8_3x5mm_P1.25mm | U5 |
| 1 | MSD-4-A | SDCard:CUI_MSD-4-A | J12 |
| 1 | RP2350B-QFN80 | Package_DFN_QFN:QFN-80-1EP_10x10mm_P0.4mm_EP3.4x3.4mm | U2 |
| 1 | TMP117xxDRV | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U6 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | W25Q128JVS | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4mm | U1 |
| 1 | orientationIndicator | Graphics:orientationIndicator | G3 |
Questions
How big is the AFSElec PCB?
It measures 50.8 × 87 mm and has 4 copper layers, 1.6 mm thick.
What parts does the AFSElec use?
148 parts, built around the 74AHCT541D, AP62150WU, MMC5983MA and MS5611-01BA03. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AFSElec KiCad files?
From the rice-eclipse/AFSElec repository on GitHub, at the commit this page was made from: the board is Version2/Version2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the AFSElec design in my own project?
Its repository states no licence, so its author keeps all rights: ask rice-eclipse before reusing the design.
More from rice-eclipse/AFSElec
10- 4 layers74.5 × 69.2 mm
- 4 layers74.5 × 69.2 mm
- 4 layers74.5 × 69.2 mm
- 4 layers54.2 × 71.8 mm
- 2 layers
- 2 layers
- 2 layers
- 2 layers
- 2 layers
Similar boards
- 4 layers50.8 × 106.6 mm
- 4 layers67.7 × 97.2 mm
- 8 layers
FIRM v1.1
NCSU-High-Powered-Rocketry-Club/FIRM-KiCad
Full and open hardware design for FIRM
108 parts1MIT - 4 layers60 × 100 mm
- 4 layers50 × 100 mm
- 4 layers46 × 186 mm
M3 assy r1
OAK-WJR/rocket-flight-computer
Amateur rocket flight computer: single-board KiCad PCB (STM32H743), firmware and diagnostics
135 parts - 4 layers50 × 100 mm
- 4 layers30 × 77 mm
