4 layers50.8 × 106.6 mm
4 layers50 × 100 mm
Pronoia Sustainer
nguyjo/Project_Prometheus- Size
- 50 × 100 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 89
- Nets
- 78
- Pads
- 262
- Tracks, vias
- 838, 145
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 22 Jan 2026
- Updated
- 22 Jun 2026
Overview
Pronoia Sustainer is an open-source printed circuit board by nguyjo, from the nguyjo/Project_Prometheus repository on GitHub. It is a 4-layer board of 50 × 100 mm with 89 parts on 78 nets, routed with 838 tracks and 145 vias.
It is built around the MS5611-01BA03, ICM-42688-PC and KX134-1211, with the TPS563201, AO3400A and SS14 among its other parts. Its parts include 34 resistors, 20 capacitors, 11 connectors, 6 diodes and 6 transistors.
Main components
8
MS5611-01BA03
QFN-8(3x5)QFN-8(3x5) Pressure Sensors ROHSMEASPressure Sensors
ICM-42688-PC
LGA-14(2.5x3)-40℃~+85℃ 1.5KB 1.71V~3.6V 16bit IMU (accelerometer + gyroscope) SPI、I2C、I3C X,Y,Z X,Y,Z ±16g ±2048dps LGA-14(2.5x3) Accelerometers ROHSTokmasAccelerometers
KX134-1211
LGA-12(2x2)16bit Accelerometer I2C X,Y,Z ±8g 运动事件检测 LGA-12(2x2) Accelerometers ROHSROHM SemiconductorAccelerometers
TPS563201
UncategorisedTexas Instruments
AO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
SS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
GSD9605YB-3V2800
SMD,9.6x9.6mm-20℃~+70℃ 2.7kHz 2V~5V 3.3V 30mA 5.2mm 80dB 9.6mm 9.6mm Active Buzzer (Built-in Driving Circuit) Electromagnetic SMD SMD,9.6x9.6mm Buzzers ROHSINGHAiBuzzers
XT30PW-M
-- Power connector / plug connector ROHSChangzhou Amass ElecUncategorised
README
README.mdWalla Walla University Prometheus Rocket Project (2025-2026)
Parts
89| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 10kΩ | PCM_JLCPCB:R_0805 | R4, R6, R8, R10, R12, R14, R16, R18, R19, R24, R25, R27, R29 |
| 11 | 100nF | PCM_JLCPCB:C_0402 | C7, C8, C9, C10, C11, C12, C13, C15, C16, C17, C20 |
| 7 | 33Ω | PCM_JLCPCB:R_0402 | R26, R28, R30, R31, R32, R35, R36 |
| 6 | AO3400A | PCM_JLCPCB:Q_SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 5 | SS14 | PCM_JLCPCB:D_SMA | D1, D2, D3, D4, D7 |
| 4 | 100Ω | PCM_JLCPCB:R_0805 | R3, R7, R11, R15 |
| 4 | 18kΩ | PCM_JLCPCB:R_0603 | R5, R9, R13, R17 |
| 4 | Servo0 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4, J5, J6, J7 |
| 3 | 10uF | PCM_JLCPCB:C_1206 | C1, C2, C19 |
| 3 | 22uF | PCM_JLCPCB:C_0805 | C3, C4, C14 |
| 2 | 1000 uF, EEE-FT1A102AP | Capacitor_SMD:CP_Elec_8x10.5 | C6, C18 |
| 2 | 1kΩ | PCM_JLCPCB:R_0805 | R20, R22 |
| 2 | Conn_01x24_Pin | Connector_PinSocket_2.54mm:PinSocket_1x24_P2.54mm_Vertical | J12, J14 |
| 1 | 100nF | PCM_JLCPCB:C_1206 | C5 |
| 1 | 10kΩ | PCM_JLCPCB:R_0603 | R2 |
| 1 | 1751303 | 1751303:1751303 | J3 |
| 1 | 22kΩ | PCM_JLCPCB:R_0805 | R23 |
| 1 | 3.3uH | Inductor_SMD:L_Bourns-SRN8040_8x8.15mm | L1 |
| 1 | 470Ω | PCM_JLCPCB:R_0402 | R21 |
| 1 | 56kΩ | PCM_JLCPCB:R_0603 | R1 |
| 1 | 640457-2 | 640457-2:TE_640457-2 | J11 |
| 1 | 640457-4 | 640457-4:TE_640457-4 | J8 |
| 1 | GSD9605YB-3V2800 | GSD9605YB-3V2800:BUZ-SMD_GSD9605YB-3V2800 | BUZZER1 |
| 1 | ICM-42688-PC | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U4 |
| 1 | KX134-1211 | KX134-1211:KIONIX_KXTJ3-1057 | U6 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D8 |
| 1 | LOGO | Graphics:WWU Logo Horizontal | G*** |
| 1 | LOGO | Graphics:IEEE Blue Logo | G*** |
| 1 | MS5611-01BA | Package_LGA:LGA-8_3x5mm_P1.25mm | U5 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | TPS563201 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | XT30PW-M | XT30PW-M:AMASS_XT30PW-M | J1 |
The 85 most common of 89 parts.
Questions
How big is the Pronoia Sustainer PCB?
It measures 50 × 100 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Pronoia Sustainer use?
89 parts, built around the MS5611-01BA03, ICM-42688-PC, KX134-1211 and TPS563201. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pronoia Sustainer KiCad files?
From the nguyjo/Project_Prometheus repository on GitHub, at the commit this page was made from: the board is hardware/KiCAD/Pronoia_Sustainer/Pronoia_Sustainer.kicad_pcb and its schematic hardware/KiCAD/Atlas_Booster/Atlas_Booster.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pronoia Sustainer design in my own project?
Its repository states no licence, so its author keeps all rights: ask nguyjo before reusing the design.
Similar boards
- 2 layers58 × 35.5 mm
- 4 layers60 × 100 mm
- 4 layers67.7 × 97.2 mm
- 4 layers50.8 × 87 mm
- 4 layers51 × 44 mm
- 2 layers46 × 56 mm
Glove daq
corneliusgruss/skill-capture-glove
Solo four-month reimplementation of Sunday Robotics' Skill Capture Glove. End-to-end: PCB, firmware, capture pipeline, HLoc-based pose tracking, and an ACT policy on 182 manipulation demos.
70 parts7MIT - 4 layers103.5 × 118 mm
MEM RevA
liamobbrien1/gbr-marlbot
Open hardware, embedded software, and experimental infrastructure for the GBR MARLBOT multi-robot research platform.
84 parts