

Frank next
RP2350 Based Hardware Emulation Platform
- Size
- 99 × 54 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 253
- Nets
- 263
- Pads
- 1,083
- Tracks, vias
- 2,543, 481
- Pours
- 88
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 20 Aug 2024
- Updated
- 8 Oct 2026
Overview
Frank next is an open-source printed circuit board by rh1tech, from the rh1tech/frank repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 99 × 54 mm with 253 parts on 263 nets, routed with 2,543 tracks and 481 vias.
It is built around the RP2350A, RP2350B and ESP8266EX, with the W25Q128JVPIQ, CH343P and SY8089AAAC among its other parts. Its parts include 101 capacitors, 70 resistors, 25 ICs, 14 connectors and 8 switches. It belongs with the retro computing and games boards and the ESP8266 and RP2350 boards of this library.
Main components
12RP2350A
QFN-60-EP(7x7)Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、Integrated LDO、True random number generator (TRNG)、Hardware ECC check QFN-60-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)RP2350B
QFN-80-EP(10x10)48 Power-on reset (POR)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Integrated LDO、True random number generator (TRNG)、Hardware ECC check、Independent watchdog (IWDG) QFN-80-EP(10x10) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)ESP8266EX
QFN-32-EP(5x5)-40℃~+125℃ -91dBm 120mA 2.4GHz 2.4GHz~2.4835GHz 2.5V~3.6V 21.5dBm 50mA 72.2Mbps SPI、UART、I2C、I2S WiFi transceiver QFN-32-EP(5x5) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICsW25Q128JVPIQ
WSON-8-EP(5x6)-40℃~+85℃ 100,000 cycles 10uA 120ms@(32KB) 128Mbit 133MHz 2.7V~3.6V 20 Years Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection、Power lock protection SPI WSON-8-EP(5x6) NOR FLASH ROHSWinbond ElecNOR FLASHCH343P
TQFN-16-EP(3x3)-40℃~+85℃ 3.3V、5V 3mA 6Mbps 90uA USB 2.0 USB to UART TQFN-16-EP(3x3) USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersSY8089AAAC
SOT-23-5-40℃~+85℃@(TA) 1 1MHz 2.7V~5.5V 2A 55uA Adjustable Buck Buck Built-in Yes SOT-23-5 DC-DC Converters ROHS矽力杰silergyDC-DC ConvertersTPD4S012DRYR-TP
DFN1510-60.35pF、11pF 100nA 10V 3A@8/20us 5.5V、15V 80W@8/20us 9V、24V IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 DFN1510-6 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)CH217K
SOT-23-6-40℃~+85℃ 1 2.7A 2.7V~5.5V 70mΩ Active Low Load Switch Undervoltage Protection(UVP)、Overcurrent Protection(OCP)、Over temperature protection(OTP) SOT-23-6 Power Distribution Switches ROHSWCH (Nanjing Qinheng Microelectronics)Power Distribution SwitchesAPS6404L-3SQR-ZR
USON-8LUSON-8L PSRAM ROHSAP MemoryDRAMTS3USB221RSER-TP
QFN-10L(1.5x2)-40℃~+85℃ 13uA 2.5V~5.5V 2/4 200ps@3.3V,0pF Power-off protection、Break-before-make function、Overcurrent Protection Single Supply QFN-10L(1.5x2) Signal Switches, Multiplexers, Decoders ROHSTECH PUBLICSignal Switches, Multiplexers, Decoders74HC4052BQ
DHVQFN-16-EP(2.5x3.5)-40℃~+125℃ -5V~5V、2V~10V 180MHz 2 27ns 38ns 4:1 5ns 70Ω DHVQFN-16-EP(2.5x3.5) Analog Switches, Multiplexers ROHSNexperiaAnalog Switches, MultiplexersAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
README
README.mdFRANK
FRANK is a hardware emulation platform built around the Raspberry Pi RP2350 (Pico 2 modules and RP2350A QFN). RP2040 / Pico still works in FRANK's socket, but in practice only a handful of firmware (mainly the older ZX Spectrum cores) still targets RP2040. Everything modern (IBM PC, NES, SNES, Genesis, the DOOM / id Tech 1 ports, FRANK OS, and so on) is RP2350-only.
It started as a fork of the Murmulator project by Alex Ekb. Over time it picked up extra video outputs, audio paths, USB and WiFi support, and several form factors.
The name comes from "Frankenstein". The board is stitched together from parts of different projects, so the name stuck.
Looking for an older board?
This repository now ships only the boards under hardware/ that are actively maintained. The accessories/ and archive/ directories are gone. Older revisions, retired boards, and accessory adapters such as HDMI2VGA and USB2PS2 live in rh1tech/frank-archive.
Experimental and work-in-progress designs live in rh1tech/frank-lab.
The boards in this repo
Ten maintained boards and one published prototype, each with its own KiCad project, gerbers, BOM and assembly drawings, plus two add-on modules (TurboSound and Hecate) and three retro-CPU boards.
| Board | Render | PCB size | Compute | Best for |
|---|---|---|---|---|
| FRANK Next | ![]() | 99.0 × 53.98 mm | RP2350B + RP2350A, both on-board | Flagship. Two RP2350 dies, on-board ESP8266EX WiFi, CH343P console, three USB-A host ports. |
| MegaFRANK | ![]() | 149.9 × 99.5 mm | Pimoroni PGA2350 (RP2350B module) | Maximal board — every output plus on-board dual-AY TurboSound, DS3231 RTC and dual power input. |
| FRANK PGA | ![]() | 99.5 × 83.1 mm | Pimoroni PGA2350 (RP2350A module) | Every output on one PCB, native USB host with multiplexer, ESD-protected. |
| FRANK | ![]() | 99.5 × 83.1 mm | Raspberry Pi Pico / Pico 2 (socket) + RP2040-Zero | Socketed alternative. Easiest to solder, swap Pico modules at will, USB-to-PS/2 helper on board. |
| Old Skool FRANK | ![]() | 100.0 × 79.0 mm | Pimoroni PGA2350 (RP2350B module) | The retro-connector board: HDMI and VGA, hardware PS/2, DB9 gamepad. Only 2-layer design, easiest to hand-assemble. |
| MiniFRANK | ![]() | 85.6 × 53.98 mm | RP2350A QFN, on-board | Compact full-feature board with WiFi, VGA, HDMI and one gamepad port. |
| FRANK Core 2U | ![]() | 67.0 × 55.0 mm | RP2350B + RP2350A, both on-board | Smallest usable dual-die board. Video, sound, storage and USB only — no WiFi, no RTC. |
| FRANK Core 2 Proto | ![]() | 55.0 × 55.0 mm | RP2350B + RP2350A, both on-board | Prototype. Core 2U without the USB host side — the dual-die topology at its smallest. |
| MicroFRANK | ![]() | 32 × 74 mm | RP2350A QFN, on-board | Smallest single-die board. HDMI only, no hardware PS/2 or DB9 gamepad. Keyboards, mice and gamepads connect over the stacked USB host. |
| ZeroFRANK | ![]() | 65 × 25 mm | RP2350A QFN, on-board | Smallest RP2350A board. HDMI only, USB host for input, on-board flash + PSRAM + I²S audio. |
| Nyx | ![]() | 51 × 21 mm | RP2350B QFN, on-board | Open-source Pico 2 clone with built-in PSRAM. Drop-in replacement for Pico Plus 2 in the FRANK socket. |
The full-size and compact boards use the M2 GPIO layout, so any firmware build for M2 runs on them (subject to the feature differences below). FRANK Next, Core 2U and Core 2 Proto are the exception: they carry two RP2350 dies and firmware must be built for that split, or the slave simply sits idle. Nyx is a compute module — it plugs into the FRANK socket and provides the RP2350B, flash and PSRAM; the FRANK motherboard provides all the I/O.
Comparison: full-size boards
| Feature | MegaFRANK | FRANK PGA | FRANK | Old Skool |
|---|---|---|---|---|
| Compute | Pimoroni PGA2350 | Pimoroni PGA2350 | Pico / Pico 2 (socket) | Pimoroni PGA2350 |
| Copper layers | 4 | 4 | 4 | 2 |
| On-board flash | via module | via module | via module | via module |
| On-board PSRAM | via module | via module | via module | via module |
| HDMI output | Yes | Yes | Yes | Yes |
| VGA output | Yes | Yes | Yes | Yes |
| Composite (RCA) | Yes | Yes | Yes | — |
| TFT display header | Yes | Yes | Yes | — |
| Hardware PS/2 port | Yes | Yes | Yes | Yes |
| USB-emulated PS/2 (RP2040-Zero) | — | — | Yes | — |
| Gamepad ports (DB9) | 2 | 2 | 2 | 1 |
| Stacked USB Type-A host | Yes | Yes | Yes | Yes |
| USB hub | MW7211A | MW7211A | MW7211A | MW7211A |
| USB host multiplexer | 74HC4052D | 74HC4052D | — | 74HC4052 |
| USBLC6 ESD protection | Yes | Yes | — | — |
| WiFi | ESP-01S socket | ESP-01S socket | ESP-01S socket | ESP-01S socket |
| Real-time clock | DS3231 | — | — | — |
| Tape input (3.5mm) | Yes | Yes | Yes | Yes |
| Audio DAC | TDA1387 | TDA1387 | TDA1387 | TDA1545A + LM358 |
| PAM8403 speaker amp | Yes | Yes | Yes | — |
| Power input | DC barrel jack (×2) | DC barrel jack | DC barrel jack | USB-C / USB-B |
| Voltage regulator | MP1584 buck + AMS1117 LDO | MP1584 buck + AMS1117 LDO | MP1584 buck + AMS1117 LDO | AMS1117 LDO |
| Mounting holes | 4 × 2.7 mm | 4 × 2.7 mm | 4 × 2.7 mm | 4 × 2.7 mm |
On-board TurboSound (dual YM2149), a DS3231 real-time clock and a DS2401 silicon serial number are unique to MegaFRANK. Old Skool FRANK is the only 2-layer board in the repo, which makes it the friendliest to hand-assembly and rework.
Comparison: compact boards
| Feature | FRANK Next | MiniFRANK | Core 2U | Core 2 Proto | MicroFRANK | ZeroFRANK |
|---|---|---|---|---|---|---|
| Compute | RP2350B + RP2350A | RP2350A QFN | RP2350B + RP2350A | RP2350B + RP2350A | RP2350A QFN | RP2350A QFN |
| On-board flash | 2 × W25Q128 | W25Q128 | 2 × W25Q128 | 2 × W25Q128 | W25Q128 | W25Q128 |
| On-board PSRAM | 2 × 8 MB | 8 MB | 2 × 8 MB | 2 × 8 MB | 8 MB | 8 MB |
| HDMI output | Yes | Yes | Yes | Yes | Yes | Yes |
| VGA output | — | Yes | — | — | — | — |
| Hardware PS/2 port | — | Yes | — | — | — | — |
| Gamepad ports (DB9) | — | 1 | — | — | — | — |
| USB Type-A host ports | 3 | 2 (stacked) | 2 | — | 2 (stacked) | — (USB-C PIO host) |
| USB hub | CH334F | MW7211A | MW7211A | — | MW7211A | — |
| USB host multiplexer | TS3USB221 × 2 | TS3USB221 | TS3USB221 | — | TS3USB221 | — |
| USB serial bridge | CH343P | — | — | — | — | — |
| WiFi | ESP8266EX on-board | ESP-01S socket | — | — | — | — |
| Real-time clock | DS3231MZ | — | — | — | — | — |
| Tape input (3.5mm) | Yes | Yes | Yes | — | — | — |
| Audio DAC | TLV320DAC3100 | TDA1387 | TDA1387T + LM358 | TDA1387T + LM358 | TDA1387 | TDA1387 |
| Power input | USB-C | USB-C | USB-C | USB-C × 2 | USB-C | USB-C |
| Voltage regulator | SY8089 buck | AMS1117 LDO | AMS1117 LDO | AMS1117 LDO | ME6211 LDO | AMS1117 LDO |
| Mounting holes | 4 × 2.5 mm plated | 4 × 2.7 mm | 4 × 2.5 mm plated | 4 × 2.5 mm plated | 4 × 2.7 mm | 4 × 2.7 mm |
FRANK Next, Core 2U and Core 2 Proto share the dual-RP2350 architecture: an RP2350B master for emulation and an RP2350A slave for USB host, audio and housekeeping. Core 2U and Core 2 Proto come from a different subsystem generation than FRANK Next — ESP-PSRAM64H memory, a discrete TDA1387T audio chain instead of the TLV320DAC3100 codec, an AMS1117 LDO instead of a switching buck, and no WiFi or RTC. Core 2 Proto is Core 2U minus its host side: same two dies, no hub, no USB-A, no tape input and no power switch.
Retro CPU boards
These are not emulation boards. Each carries a real vintage CPU in a DIP-40 socket, with an RP2350B acting as the chipset — memory, video, storage and I/O. They do not run the FRANK emulation firmware; each has its own chipset firmware.
| Board | Render | PCB size | CPU | Notes |
|---|---|---|---|---|
| XT8086 Alpha | ![]() | 99.9 × 78.0 mm | Intel 8086 (minimum mode) | The earlier 8086 design: PGA2350 module, VGA and composite outputs. Superseded by XT8086 Beta, now in frank-lab. |
Modules
Two add-on modules ship alongside the boards:
| Module | Render | PCB size | What it is |
|---|---|---|---|
| TurboSound | ![]() | 42 × 79.5 mm | Dual YM2149 / AY-3-8910 sound expansion (socketed DIP-40). Currently supported only by MiniFRANK via its expansion header. |
| Hecate | ![]() | 53 × 29 mm | Standalone RP2040 USB-to-PS/2 bridge board. Runs the Hecate firmware; presents USB keyboards and mice as PS/2 devices. |
Supported software
Over thirty emulators and native ports run on FRANK boards.
Console emulators
| Firmware | Platform | Repository | PSRAM required |
|---|---|---|---|
| frank-nes | NES / Famicom (Dendy) | frank-nes | Yes (8 MB) |
| frank-snes | SNES / Super Famicom | frank-snes | Yes (8 MB) |
| frank-genesis | Sega Genesis / Mega Drive | frank-genesis | Yes (8 MB) |
| frank-c64 | Commodore 64 | frank-c64 | Yes (8 MB) |
| frank-apple | Apple IIe | frank-apple | Optional |
| frank-msx | MSX / MSX2 / MSX2+ (fMSX core) | frank-msx | Yes (8 MB) |
PC emulation
| Firmware | Platform | Repository | PSRAM required |
|---|---|---|---|
| frank-386 | IBM PC i386 (DOS, Windows 3.x/95, Linux) | frank-386 | Yes (8 MB) |
Game engine ports
| Firmware | Game | Repository | PSRAM required |
|---|---|---|---|
| frank-idtech1 | DOOM, Heretic, Hexen, Strife (all-in-one) | frank-idtech1 | Yes (8 MB) |
| frank-doom | DOOM (standalone) | frank-doom | Yes (8 MB) |
| frank-heretic | Heretic | frank-heretic | Yes (8 MB) |
| frank-wolf3d | Wolfenstein 3D | frank-wolf3d | Yes (8 MB) |
| frank-duke3d | Duke Nukem 3D | frank-duke3d | Yes (8 MB) |
| frank-prince | Prince of Persia | frank-prince | Yes (8 MB) |
| frank-digger | Digger Remastered | frank-digger | No |
| frank-quest | ScummVM (AGI, SCI, SCUMM v1–v7, GOB, KYRA — King's Quest, Monkey Island, Day of the Tentacle, Full Throttle, Gobliiins, Kyrandia and more) | frank-quest | Yes (8 MB) |
OS and utilities
| Firmware | Description | Repository | PSRAM required |
|---|---|---|---|
| frank-os | Full desktop OS (Windows 95-style GUI, apps, built-in emulators) | frank-os | Yes (8 MB) |
| frank-kickstart | UF2 firmware launcher with SD card browser | frank-kickstart | Optional |
| frank-manul | Text-mode web browser (HTTP/HTTPS via ESP-01 WiFi) | frank-manul | Yes (8 MB) |
| frank-netcard | AT modem firmware for the ESP-01 WiFi module | frank-netcard | No |
Murmulator firmware
The original Murmulator project provides additional firmware that runs on FRANK boards as well:
ZX Spectrum cores: ZX Spectrum 48K / 128K / +3e (tecnocat, pico-spec, frut-bat, ZX Speccy P, murmulator), ZX Elf (pico-alf).
Other cross-platform emulators: MS-DOS IBM PC XT 8088, BK-0010 / BK-0011M, Radio 86RK, Macintosh, Atari 800, NES / Famicom / Dendy, Sega Master System / Game Gear, NEC PC Engine / TurboGrafx-16, Nintendo GameBoy / GameBoy Color, Watara Supervision, Atari Lynx, Bandai Wonderswan / Wonderswan Color, NeoGeo Pocket Color, Gamate, Game & Watch / Elektronika.
Tools and applications: MurmulatorOS, Picomite MMBasic, VersaTerm, the original Murmulator bootloader.
Other compatible boards
Most firmware also runs on:
- Murmulator (M1 and M2)
- Olimex PICO-PC (some firmware)
- Waveshare RP2350-PiZero (some firmware)
Getting started
- Order or fab the PCB (gerbers are in each board's
gerbers/directory). - Source the components using the BOM (
hardware/<board>/docs/<rev>/bom.html). - Solder following the board-specific guide, starting with the smallest passives and working outwards.
- Flash firmware: hold BOOTSEL on the RP chip, plug USB, release, copy a
.uf2file to the drive that appears (or usepicotool load). - Insert an SD card with ROMs, WADs or disk images.
- Plug in a display (HDMI or VGA), keyboard (PS/2 or USB) and gamepad.
For quick switching between firmware, flash frank-kickstart first. It gives you a graphical launcher that re-flashes from SD without touching BOOTSEL again.
PSRAM
Most modern firmware (frank-os, frank-quest, frank-386, frank-genesis, frank-snes, frank-msx, frank-idtech1, frank-doom and so on) needs 8 MB of PSRAM. Some firmware refuses to boot without it: frank-quest installs a custom dlmalloc backed entirely by external PSRAM (drivers/psram_init.c, drivers/dlmalloc.c), because the runtime (heap-allocated game state, decoded resources, mixer ring buffers, font caches) does not fit in the RP2350's 520 KB of SRAM.
How you get PSRAM depends on the board:
- FRANK Next, Core 2U and Core 2 Proto: 8 MB PSRAM per die, both dies on-board. Nothing to do.
- MiniFRANK, MicroFRANK and ZeroFRANK: PSRAM is already on-board (8 MB). Nothing to do.
- FRANK PGA, MegaFRANK and Old Skool FRANK: the Pimoroni PGA2350 module already includes 8 MB PSRAM. Nothing to do.
- FRANK: the socketed Pico 2 has no PSRAM by default. Three ways to fix this:
- Pimoroni Pico Plus 2 (recommended). A ready-made Pico 2 with 8 MB PSRAM. Drop it into the socket and you are done.
- Build a Nyx, an open-source RP2350B board with integrated 16 MB flash and 8 MB PSRAM. Same form factor as Pico 2, drops straight into the socket.
- Solder a PSRAM chip on top of the flash chip of an RP2350 clone. SOP-8 flash chips are mostly only on clones (typically the black boards), not on a genuine Pico 2.
Repo layout
hardware/ Board KiCad projects (frank_next, megafrank, frank_pga, frank,
oldskool, minifrank, frank_core2u, frank_core2_proto, microfrank,
zerofrank, nyx), the retro-CPU board xt8086_alpha, plus the turbosound and hecate modules
docs/ Shared component datasheets and assembly notes
software/ Pre-built UF2s. Currently ships Hecate, the USB-to-PS/2 bridge
firmware for FRANK's on-board RP2040-Zero. Once flashed, a USB
keyboard or mouse appears on the hardware PS/2 lines.
Source: https://github.com/rh1tech/hecateDocumentation
Each board and module has its own assembly and usage guide:
- FRANK Next assembly and usage guide
- MegaFRANK assembly and usage guide
- FRANK PGA assembly and usage guide
- FRANK assembly and usage guide
- Old Skool FRANK assembly and usage guide
- MiniFRANK assembly and usage guide
- FRANK Core 2U assembly and usage guide
- FRANK Core 2 Proto assembly and usage guide
- MicroFRANK assembly and usage guide
- ZeroFRANK assembly and usage guide
- Nyx assembly and usage guide
- TurboSound module guide
- Hecate (USB-to-PS/2 bridge) guide
The hardware/<board>/docs/ directories also contain auto-generated BOMs (bom.html) and assembly drawings (assembly.pdf, schematics.pdf) for each PCB revision.
Links
- rh1.tech/projects/frank — project website
- rh1tech/frank-archive — older boards and accessories
- rh1tech/frank-lab — experimental designs
Firmware repositories
Console emulators:
- frank-nes — NES / Famicom (Dendy)
- frank-snes — SNES / Super Famicom
- frank-genesis — Sega Genesis / Mega Drive
- frank-c64 — Commodore 64
- frank-apple — Apple IIe
- frank-msx — MSX / MSX2 / MSX2+
PC emulation:
- frank-386 — IBM PC i386 (DOS, Windows 3.x/95, Linux)
Game engine ports:
- frank-idtech1 — DOOM, Heretic, Hexen, Strife (all-in-one)
- frank-doom — DOOM (standalone)
- frank-heretic — Heretic
- frank-wolf3d — Wolfenstein 3D
- frank-duke3d — Duke Nukem 3D
- frank-prince — Prince of Persia
- frank-digger — Digger Remastered
- frank-quest — ScummVM (AGI, SCI, SCUMM, GOB, KYRA)
OS and utilities:
- frank-os — Full desktop OS with built-in emulators
- frank-kickstart — UF2 firmware launcher
- frank-manul — Text-mode web browser
- frank-netcard — AT modem firmware for ESP-01
- hecate — USB-to-PS/2 bridge for the RP2040-Zero
Author
Mikhail Matveev — software engineer and hardware developer based in Thessaloniki, Greece. Background in software architecture, QA and open-source development. Builds retro computing hardware and writes firmware for fun. More projects at rh1.tech.
License
© 2026 Mikhail Matveev, xtreme@rh1.tech
GPL v3. See LICENSE.
Parts
253| Qty | Value | Footprint | References |
|---|---|---|---|
| 56 | 100nF | FRANK:C_0603_1608Metric | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C26, C100 +40 |
| 23 | 10K | FRANK:R_0603_1608Metric | R2, R4, R18, R23, R28, R29, R30, R31, R32, R35, R38, R41, R42, R43, R45, R46 +7 |
| 16 | 10uF | FRANK:C_0603_1608Metric | C39, C45, C47, C48, C76, C77, C78, C80, C82, C84, C86, C87, C88, C96, C98, C101 |
| 9 | 1K | FRANK:R_0603_1608Metric | R7, R9, R19, R21, R26, R48, R57, R60, R64 |
| 8 | 4.7uF | FRANK:C_0603_1608Metric | C3, C4, C8, C9, C22, C25, C27, C28 |
| 6 | 100K | FRANK:R_0603_1608Metric | R55, R58, R62, R65, R66, R70 |
| 5 | 100R | FRANK:R_0603_1608Metric | R10, R11, R12, R13, R44 |
| 5 | 330R | FRANK:R_0603_1608Metric | R16, R17, R27, R39, R40 |
| 5 | TPD4S012DRYR | FRANK:TPD4S012DRYR | U13, U14, U21, U23, U25 |
| 4 | 15pF | FRANK:C_0603_1608Metric | C5, C6, C23, C24 |
| 4 | 27R | FRANK:R_0603_1608Metric | R14, R15, R24, R25 |
| 4 | 33R | FRANK:R_0603_1608Metric | R1, R3, R6, R20 |
| 4 | 5.1K | FRANK:R_0603_1608Metric | R50, R51, R52, R53 |
| 4 | MountingHole | FRANK:MountingHole_2.5mm_Pad_Via | H1, H2, H3, H4 |
| 3 | 12 MHz | FRANK:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1, Y2, Y4 |
| 3 | 1uF | FRANK:C_0603_1608Metric | C51, C52, C85 |
| 3 | 4.7K | FRANK:R_0603_1608Metric | R33, R34, R61 |
| 3 | 676430910 | FRANK:USB_A_Short | J12, J13, J14 |
| 3 | CH217K | FRANK:SOT-23-6 | U22, U24, U27 |
| 2 | 0R | FRANK:R_0603_1608Metric | R8, R22 |
| 2 | 100uF | FRANK:C_1206_3216Metric | C43, C44 |
| 2 | 100uF | FRANK:CP_Elec_6.3x6.0 | C72, C73 |
| 2 | 12K | FRANK:R_0603_1608Metric | R36, R37 |
| 2 | 12pF | FRANK:C_0603_1608Metric | C89, C90 |
| 2 | 15p | FRANK:C_0603_1608Metric | C57, C58 |
| 2 | 1N5819WS | FRANK:D_SOD-323 | D1, D2 |
| 2 | 270R | FRANK:R_Array_4x0603 | RN1, RN2 |
| 2 | 3.3µH | FRANK:L_AOTA-B201610_2.0x1.6mm | L1, L2 |
| 2 | 330R 2A | FRANK:L_0805_2012Metric | L3, L5 |
| 2 | APS6404L-3SQR-ZR | FRANK:PSON50P200X300X50-9N | U1, U6 |
| 2 | BC850 | FRANK:SOT-23 | Q2, Q3 |
| 2 | Debug | FRANK:JST_SH_1x03_P1.00mm_Vertical | J1, J4 |
| 2 | RP Boot | FRANK:Button_SMD_3x4x2mm | S1, S3 |
| 2 | RP Reset | FRANK:Button_SMD_3x4x2mm | S2, S4 |
| 2 | TS3USB221RSER | FRANK:UQFN-10 | U12, U17 |
| 2 | UART | FRANK:JST_SH_1x03_P1.00mm_Vertical | J2, J5 |
| 2 | USB4215-03-A | FRANK:USB_C_Receptacle | J10, J11 |
| 2 | W25Q128JVPIQ | FRANK:WSON-8-1EP_6x5mm_P1.27mm_EP3.45x4.35mm | U2, U4 |
| 1 | 1.5pF | FRANK:C_0603_1608Metric | C54 |
| 1 | 100n | FRANK:C_0603_1608Metric | C60 |
| 1 | 104031-0811 | FRANK:MicroSD_SMD_Long | J6 |
| 1 | 10u | FRANK:C_0603_1608Metric | C59 |
| 1 | 1M | FRANK:R_0603_1608Metric | R56 |
| 1 | 1N4148 | FRANK:D_SOD-323 | D3 |
| 1 | 1u | FRANK:C_0603_1608Metric | C53 |
| 1 | 2.2uH | FRANK:L_Cenker_CKCS3015 | L6 |
| 1 | 2.4pF | FRANK:C_0603_1608Metric | C55 |
| 1 | 22K | FRANK:R_0603_1608Metric | R63 |
| 1 | 22pF | FRANK:C_0603_1608Metric | C91 |
| 1 | 26 MHz Passive | FRANK:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y3 |
| 1 | 300K | FRANK:R_0603_1608Metric | R54 |
| 1 | 3nH | FRANK:L_0603_1608Metric | L4 |
| 1 | 74HC4052BQ | FRANK:74HC4052BQ115 | U26 |
| 1 | AO3401A | FRANK:SOT-23-3L_AOS | U16 |
| 1 | Antenna_Shield | FRANK:Antenna_2.4GHz | AE1 |
| 1 | Blue | FRANK:LED_0603_1608Metric | LD1 |
| 1 | CH334F | FRANK:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U19 |
| 1 | CH343P | FRANK:WCH_QFN-16-1EP_3x3mm_P0.5mm_EP1.8x1.8mm | U20 |
| 1 | CR1220 | FRANK:Battery_CR1220 | BT1 |
| 1 | DC3RX19JA2 | FRANK:HDMI_Female | J3 |
| 1 | DS05-127-2-02BK-SMT-TR | FRANK:SW_DS05-127-2-02BK-SMT-TR | JP2 |
| 1 | DS3231MZ | FRANK:SO-8_3.9x4.9mm_P1.27mm | U11 |
| 1 | ESP Flash | FRANK:Button_SMD_3x4x2mm | S6 |
| 1 | ESP Reset | FRANK:Button_SMD_3x4x2mm | S5 |
| 1 | ESP8266EX | FRANK:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U9 |
| 1 | Green | FRANK:LED_0603_1608Metric | LD3 |
| 1 | Orange | FRANK:LED_0603_1608Metric | LD4 |
| 1 | PJ-320D | FRANK:AudioJack_3.5mm_PJ320D_TapeIn | J9 |
| 1 | PJ-320D | FRANK:AudioJack_3.5mm_PJ320D_AudioOut | J7 |
| 1 | PWR Debug | FRANK:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP5 |
| 1 | RP2350 | FRANK:QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm | U5 |
| 1 | RP2350B | FRANK:RP2350-QFN-80_10x10_P0.4mm | U3 |
| 1 | SK12D07VG3NS | FRANK:Switch_Slide_SK12D07VG3NS_PWR | S8 |
| 1 | SS12D00 | FRANK:Switch_Slide_SS12D00 | S7 |
| 1 | SY8089AAAC | FRANK:SOT-23-5 | U18 |
| 1 | Speaker | FRANK:JST_GH_1x02_P1.25mm | J8 |
| 1 | TLV320DAC3100IRHBR | FRANK:TLV320DAC3100IRHBR | U7 |
| 1 | TPS2116DRL | FRANK:SOT-583-8 | U15 |
| 1 | UART SEL Debug | FRANK:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3 |
| 1 | UMH3N | FRANK:SOT-363 | Q1 |
The 248 most common of 253 parts.
More from rh1tech/frank
12- 2 layers149.9 × 99.5 mm

- 2 layers99.5 × 83.1 mm

- 2 layers99.5 × 83.1 mm

- 4 layers67 × 55 mm

- 4 layers85.6 × 54 mm

- 4 layers55 × 55 mm

- 2 layers100 × 79 mm

- 4 layers32 × 74 mm

- 4 layers65 × 25 mm

- 2 layers99.9 × 78 mm

- 2 layers42 × 79.5 mm

- 2 layers53 × 29 mm

Similar boards
- 4 layers80.6 × 54 mm

Frank next proto
rh1tech/frank-lab
FRANK Board Laboratory (work-in-progress board prototopyes)
211 parts4GPL-3.0 - 4 layers50 × 50 mm

Pdaltmode
AnterCreeper/pdaltmode
USB Power Delivery Alt-mode Negotiation using CH32X035
88 parts10LGPL-2.1 - 4 layers99.5 × 65 mm

- 4 layers32 × 74 mm

- 2 layers99 × 65 mm

- 2 layers45 × 30 mm

Phone hub
ovo-Tim/phone-hub
A USBC hub for your phone and computers. It aims to help you customize your phone and computers by allowing you to connect to any I2C, SPI, and UART devices.
47 parts3GPL-3.0 - 4 layers107.5 × 56 mm

Output panel
gustebeast/public-steel-guitar
A pedal steel guitar you can build yourself, from parts anyone can buy.
179 partsCERN-OHL-S-2.0 - 4 layers128.5 × 40 mm

Scalenode cm4-baseboard
antmicro/scalenode-cm4-baseboard
Baseboard for Raspberry Pi 4 Compute Module optimized for clustering
146 parts152Apache-2.0
Questions
How big is the Frank next PCB?
It measures 99 × 54 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Frank next use?
253 parts, built around the RP2350A, RP2350B, ESP8266EX and W25Q128JVPIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Frank next KiCad files?
From the rh1tech/frank repository on GitHub, at the commit this page was made from: the board is hardware/frank_next/frank_next.kicad_pcb and its schematic hardware/frank/amp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Frank next design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).













