Skip to the content

TS3USB221RSER-TP

TECH PUBLICExtended

-40℃~+85℃ 13uA 2.5V~5.5V 2/4 200ps@3.3V,0pF Power-off protection、Break-before-make function、Overcurrent Protection Single Supply QFN-10L(1.5x2) Signal Switches, Multiplexers, Decoders ROHS

Part id
tech-public/TS3USB221RSER-TP
Category
Signal Switches, Multiplexers, Decoders
Package
QFN-10L(1.5x2)
Pins
10
In stock
6,947 at JLCPCB (C48543272)
Used on
26 open-source boards

Overview

The TS3USB221RSER-TP is a signal Switches, Multiplexers, Decoder made by TECH PUBLIC in a QFN-10L(1.5x2) package with 10 pins. -40℃~+85℃ 13uA 2.5V~5.5V 2/4 200ps@3.3V,0pF Power-off protection、Break-before-make function、Overcurrent Protection Single Supply QFN-10L(1.5x2) Signal Switches, Multiplexers, Decoders ROHS.

PCBKit's library has its KiCad symbol (Gekkio_Interface_USB:TS3USB221RSER, from Gekkio) and its footprint (EasyEDA_Cloud:UQFN-10_L2.0-W1.5-P0.50-BL, from EasyEDA), ready for a KiCad board. 6,947 are in stock at JLCPCB (part C48543272). 26 open-source boards in 17 repositories on GitHub use it.

Symbol

11D+21D-32D+42D-5GND6OE7D-8D+9S10VCC
Gekkio_Interface_USB:TS3USB221RSERFrom Gekkio

Footprint

EasyEDA_Cloud:UQFN-10_L2.0-W1.5-P0.50-BLFrom EasyEDA

Pinout

10
The pins of the TS3USB221RSER-TP
PinNameType
11D+Input/output
21D-Input/output
32D+Input/output
42D-Input/output
5GNDPower in
6OEInput
7D-Input/output
8D+Input/output
9SInput
10VCCPower in

Open-source boards using it

26See all 26
  • 4 layers98.7 × 77.3 mmAkeypad, the printed circuit board in 3D

    Akeypad

    luantty2/akeypad

    8khz polling rate keypad, uses STM32F405 and USB3300, powered by QMK.

    69 parts13GPL-3.0
  • 4 layers50 × 50 mmPdaltmode, the printed circuit board in 3D

    Pdaltmode

    AnterCreeper/pdaltmode

    USB Power Delivery Alt-mode Negotiation using CH32X035

    88 parts10LGPL-2.1
  • 4 layers99.5 × 65 mmEcho, the printed circuit board in 3D

    Echo

    rh1tech/echo

    Echo: ESP32-Based VGA Board

    181 parts4
  • 4 layers210 × 120 mmFrank zx, the printed circuit board in 3D

    Frank zx

    rh1tech/frank-lab

    FRANK Board Laboratory (work-in-progress board prototopyes)

    273 parts4GPL-3.0
  • 4 layers65 × 40 mmUsb passthrough, the printed circuit board in 3D

    Usb passthrough

    fgihl/usb-c-passthrough

    A USB 2.0 (480 Mbit/s) passthrough board that can electrically "unplug" a USB connection under software control — used for Hardware-in-the-Loop (HIL) testing.

    57 parts2MIT
  • 4 layers130 × 105 mmHomeDeck, the printed circuit board in 3D

    HomeDeck

    Kilan777/HomeDeck

    Jarvis HomeDeck: a Raspberry Pi CM4 carrier board and voice-assistant software for a 7-inch smart display (KiCad hardware, generated from Python, plus the Python/JS assistant)

    228 parts1
  • 4 layers32 × 74 mmFrankless, the printed circuit board in 3D

    Frankless

    arlaneenalra/pi-pico-boards

    A place to keep various pi-pico-board experiments

    124 parts

Questions

Is there a KiCad symbol and footprint for the TS3USB221RSER-TP?

Yes. The symbol is Gekkio_Interface_USB:TS3USB221RSER and the footprint EasyEDA_Cloud:UQFN-10_L2.0-W1.5-P0.50-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TS3USB221RSER-TP?

QFN-10L(1.5x2), with 10 pins. Its footprint is drawn on this page.

Where is the TS3USB221RSER-TP datasheet?

TECH PUBLIC publishes it: the Datasheet link on this page opens it.

Where can I order the TS3USB221RSER-TP?

JLCPCB lists it as part C48543272, with 6,947 in stock; the sellers' links on this page open their listings.

Which open-source boards use the TS3USB221RSER-TP?

26 boards in 17 repositories on GitHub; the most starred are listed on this page, with their KiCad files.