

JakesPadMk3
A custom built fighting gamepad controller for arcade style games. This controller is custom sized for "Jake". It uses a raspberry pi 2040 chipset along with Kailh keyswitches with a custom 3D printed enclosure and PCB.
- Size
- 277 × 171 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 24
- Pads
- 168
- Tracks, vias
- 172, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Feb 2024
- Updated
- 15 Jun 2024
Overview
JakesPadMk3 is an open-source printed circuit board by rganlath3, from the rganlath3/JakesPad repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 277 × 171 mm with 39 parts on 24 nets, routed with 172 tracks and 0 vias.
It is built around the RP2040-ZERO. Its parts include 6 switches and 1 IC. It belongs with the RP2040 boards of this library.
Main components
1README
README.mdJakesPad
A custom built fighting gamepad controller for arcade style games. This controller is custom sized for "Jake". It uses a raspberry pi 2040 chipset along with Kailh keyswitches with a custom 3D printed enclosure and PCB. This is based on jfedor2's flatbox rev5 design. I reverse engineered the PCB from his design here: https://github.com/jfedor2/flatbox.git
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | SW_DIP_x01 | keyswitches.pretty-master:Kailh_socket_PG1350_optional | A1, A2, A3, A4, B1, B2, B3, B4, C1, C2, C3, C4 |
| 6 | MountingHole | MountingHole:MountingHole_4.3mm_M4 | H1, H2, H3, H4, H5, H6 |
| 6 | SW_Push | RanilCustom:SW_PUSH-12mmWithCAD | SW1, SW2, SW3, SW4, SW5, SW6 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | 3V3, 5V, GND |
| 1 | 200ohm | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R |
| 1 | 5V LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | PWR |
| 1 | LOGO | JakesPadImages:22 | G*** |
| 1 | LOGO | JakesPadImages:9 | G*** |
| 1 | LOGO | JakesPadImages:jakenotstinky | G*** |
| 1 | LOGO | JakesPadImages:1 | G*** |
| 1 | LOGO | JakesPadImages:23 | G*** |
| 1 | LOGO | JakesPadImages:21 | G*** |
| 1 | LOGO | JakesPadImages:jakenotnotstinky | G*** |
| 1 | LOGO | JakesPadImages:13 | G*** |
| 1 | LOGO | JakesPadImages:16 | G*** |
| 1 | rp2040-zero | mcu:rp2040-zero-tht | U2 |
Similar boards
- 2 layers132.3 × 94.9 mm

- 2 layers321 × 92.3 mm

- 2 layers255.9 × 99.3 mm

Zerosprey42
beekeeb/zerosprey42
Zerosprey42 Keyboard is a wired, beginner friendly, choc hotswap, MonoBlockSplit (Unibody), column-staggered, DIY mechanical keyboard.
96 parts140 - 2 layers146.3 × 69.5 mm

- 2 layers54 × 64 mm

DonConIOmini
ravinrabbid/DonCon2040
RP2040 based firmware and hardware for DIY Taiko no Tatsujin Drum Controllers
96 parts66MIT - 2 layers52 × 50 mm

RP2040-TestPatternGenerator VGA
nmur/RP2040-TestPatternGenerator
A simple test pattern generator running on the RP2040 microcontroller
12 parts64GPL-3.0 - 2 layers120 × 40 mm

Buinchiez40
ChrisChrisLoLo/bunchiez40
A pocket keyboard that makes use of mouse switches to achieve a miniscule size
90 parts56GPL-3.0 - 2 layers305.2 × 76.2 mm

Questions
How big is the JakesPadMk3 PCB?
It measures 277 × 171 mm and has 2 copper layers, 1.6 mm thick.
What parts does the JakesPadMk3 use?
39 parts, built around the RP2040-ZERO. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the JakesPadMk3 KiCad files?
From the rganlath3/JakesPad repository on GitHub, at the commit this page was made from: the board is PCB Design/JakesPad/JakesPadMk3.kicad_pcb and its schematic PCB Design/JakesPad/JakesPad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the JakesPadMk3 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).