

Db25 bob
AC Servo Driver for STM32F4
- Size
- 99.8 × 99.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 97
- Nets
- 144
- Pads
- 493
- Tracks, vias
- 1,289, 65
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 9 Dec 2013
- Updated
- 23 Aug 2023
Overview
Db25 bob is an open-source printed circuit board by rene-dev, from the rene-dev/stmbl repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 99.8 × 99.8 mm with 97 parts on 144 nets, routed with 1,289 tracks and 65 vias.
It is built around the ADUM1200CR, ADUM1201WTRZ and RJ45. Its parts include 34 capacitors, 25 connectors, 14 ICs, 12 resistors and 6 diodes. It belongs with the robots and motor control boards of this library.
Main components
3ADUM1200CR
SOIC-8-40℃~+125℃ 0 2 2500 25Mbps 35kV/us Bidirectional signal isolation、Multi-voltage domain interface SOIC-8 Digital Isolators ROHSAnalog DevicesDigital IsolatorsADUM1201WTRZ
SOIC-8-40℃~+125℃ 0 10Mbps 2 2500 35kV/us SOIC-8 Digital Isolators ROHSAnalog DevicesDigital IsolatorsRJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
README
README.mdBuild Log: https://travis-ci.org/rene-dev/stmbl
DISCLAIMER
THE AUTHORS OF THIS SOFTWARE ACCEPT ABSOLUTELY NO LIABILITY FOR ANY HARM OR LOSS RESULTING FROM ITS USE. IT IS EXTREMELY UNWISE TO RELY ON SOFTWARE ALONE FOR SAFETY. Any machinery capable of harming persons must have provisions for completely removing power from all motors, etc, before persons enter any danger area. All machinery must be designed to comply with local and national safety codes, and the authors of this software can not, and do not, take any responsibility for such compliance.
This software is released under the GPLv3.
STMBL
There is work in progress on documentation: https://github.com/rene-dev/stmbl/blob/master/docs/src/Getting%20Started.adoc
IRC: #stmbl on irc.hackint.eu https://webirc.hackint.org/#stmbl
STMBL is an open source servo drive designed for Retrofitting CNC machines and Robots. It supports Industrial AC and DC servos with up to 320V and 2kW (see specs for details).
Documentation about the PCB and pinout of the feedback connector:
https://github.com/rene-dev/stmbl/wiki/Pinouts
https://github.com/rene-dev/stmbl/wiki/PCB
Hardware version 4.1

Driving a Bosch Turboscara
https://www.youtube.com/watch?v=d6NH1W7DUnQ
https://www.youtube.com/watch?v=oTllxnYAgFc
Driving a Manutec Robot
https://www.youtube.com/watch?v=gwgnAeGjZrA
https://www.youtube.com/watch?v=wXLcAZwjlzE
Driving a Weeke BP12 VMC
https://www.youtube.com/watch?v=24LftGNp4MI
Driving a Haas VF0 (Spindle + Axes)
https://www.youtube.com/watch?v=kqenepupJIs
Drivetest
https://www.youtube.com/watch?v=-E1o_5cFyto
Supported Motors
- Synchronous AC Servos
- Asynchronous AC Servos
- DC Servos
- 2 Phase HF spindle motors
Supported Feedback systems
- Resolvers
- Incremental encoders
- sin/cos encoder interpolation
- Mitsubishi absolute encoders
- Sanyo Denki absolute encoders
- Yaskawa absolute encoders
- Sick HIPERFACE®
- Tamagawa SmartAbs
Planned:
- EnDat
- BiSS
- SSI
- Sanyo Denki wire-saving incremental encoder
Supported Position/Velocity Commands Inputs:
- Smartserial
- Quadrature
- Step/direction
- RS485
TODO
- Sensorless FOC
Directories
- hw/spice/ Spice simulation for resolver interface
- hw/kicad/v4.0/ kicad files for version 4
- src/ STM32F4 code, command, feedback and control loop
- stm32f303/ STM32F3 code, running on the HV side, generating PWM
Commercial Applications
Should you find the GPL license insufficient for your needs, other licenses can be purchased from my company.
Likewise, please contact us should you wish to fund the further development of this project, or are interesed in custom hardware, software, or commercial support.
Parts
97| Qty | Value | Footprint | References |
|---|---|---|---|
| 31 | C | Capacitors_SMD:C_1210 | C1, C2, C3, C10, C11, C12, C13, C14, C15, C16, C17, C25, C26, C27, C28, C29 +15 |
| 12 | R | Resistors_SMD:R_0805 | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12 |
| 9 | RJ45 | Connect:RJ45_8 | J3, J4, J5, J6, J7, J8, J9, J10, J11 |
| 8 | ADuM1201WT | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U1, U2, U3, U4, U5, U6, U7, U8 |
| 6 | ADuM1200CR | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U9, U10, U11, U12, U13, U14 |
| 5 | DIL8 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | P1, P2, P4, P5, P6 |
| 3 | C | Capacitors_SMD:C_0805 | C22, C23, C24 |
| 3 | DIL16 | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | P7, P8, P9 |
| 3 | DIODE | Diodes_SMD:MiniMELF_Standard | D4, D5, D6 |
| 3 | FET_N | Transistors_SMD:sc70 | Q1, Q2, Q3 |
| 3 | LED | LEDs:LED-0805 | D1, D2, D3 |
| 2 | CONN_6 | Sockets_WAGO734:WAGO_734_6pin_Straight_RuggedPads | P11, P13 |
| 2 | DB25 | Connect:DB25FD | J1, J2 |
| 1 | CONN_2 | Sockets_WAGO734:WAGO_734_2pin_Straight_RuggedPads | P10 |
| 1 | CONN_4 | custom_footprints:SIP7 | P15 |
| 1 | CONN_7 | Socket_Strips:Socket_Strip_Straight_1x07 | P12 |
| 1 | DIL6 | Housings_SOT-23_SOT-143_TSOT-6:SC-70-6 | P3 |
The 94 most common of 97 parts.
More from rene-dev/stmbl
12- 4 layers59.2 × 66 mm

- 2 layers100 × 100 mm

- 2 layers100 × 100 mm

- 4 layers42 × 42 mm

- 4 layers99.8 × 74.9 mm

- 2 layers100 × 100 mm

- 2 layers100 × 100 mm

- 2 layers99.9 × 99.9 mm

- 2 layers100 × 100 mm

- 2 layers57 × 75 mm

- 2 layers87.5 × 50 mm

- 4 layers100 × 75 mm

Similar boards
- 2 layers33.7 × 97.8 mm

HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 4 layers84 × 82 mm

Toad
travisgoodspeed/goodfet
An embedded bus adapter for various microcontrollers and radios.
241 parts333 - 2 layers100 × 100 mm

- 2 layers50 × 55.4 mm

- 2 layers67.9 × 47.8 mm

Platine
nv1t/standing-desk-interceptor
I wanted to intercept the communication between my Flexispot standing desk buttons. This is the progress on the project
11 parts52CC0-1.0 - 4 layers90 × 75 mm

- 4 layers73.9 × 84.5 mm

Aei
Severson-Group/AMDC-Hardware
Circuit board designs for controlling advanced motor systems
54 parts51 - 2 layers99 × 60 mm

Pwr
mfkiwl/KiwiSDR_PCB
KiCAD PCB files for KiwiSDR project including active antenna and bias tee
64 parts46
Questions
How big is the Db25 bob PCB?
It measures 99.8 × 99.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Db25 bob use?
97 parts, built around the ADUM1200CR, ADUM1201WTRZ and RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Db25 bob KiCad files?
From the rene-dev/stmbl repository on GitHub, at the commit this page was made from: the board is hw/kicad/bob/db25_bob/db25_bob.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Db25 bob design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).