2 layers100 × 100 mm
4 layers59.2 × 66 mm
Ethernet bob
rene-dev/stmbl990AC Servo Driver for STM32F4
- Size
- 59.2 × 66 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 562
- Nets
- 146
- Pads
- 906
- Tracks, vias
- 1,672, 112
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 9 Dec 2013
- Updated
- 23 Aug 2023
Overview
Ethernet bob is an open-source printed circuit board by rene-dev, from the rene-dev/stmbl repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 59.2 × 66 mm with 562 parts on 146 nets, routed with 1,672 tracks and 112 vias.
It is built around the SP3485EN-Y and USBLC6-4SC6. Its parts include 26 capacitors, 23 resistors, 8 connectors, 6 ICs and 3 diodes. It belongs with the robots and motor control and interfaces and adapters boards and the STM32 boards of this library.
Main components
2
SP3485EN-Y
SOP-8SOP-8 RS-485 / RS-422 ICs ROHSYLPTECRS-485 / RS-422 ICs
USBLC6-4SC6
SOT-23-6-55℃~+125℃ 0.3pF 15V 300W@8/20us 4.7A@8/20us 5V 6V 80nA ESD Four channels IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Unidirectional SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
README.md
Build Log: https://travis-ci.org/rene-dev/stmbl
DISCLAIMER
THE AUTHORS OF THIS SOFTWARE ACCEPT ABSOLUTELY NO LIABILITY FOR ANY HARM OR LOSS RESULTING FROM ITS USE. IT IS EXTREMELY UNWISE TO RELY ON SOFTWARE ALONE FOR SAFETY. Any machinery capable of harming persons must have provisions for completely removing power from all motors, etc, before persons enter any danger area. All machinery must be designed to comply with local and national safety codes, and the authors of this software can not, and do not, take any responsibility for such compliance.
This software is released under the GPLv3.
STMBL
There is work in progress on documentation: https://github.com/rene-dev/stmbl/blob/master/docs/src/Getting%20Started.adoc
IRC: #stmbl on irc.hackint.eu https://webirc.hackint.org/#stmbl
STMBL is an open source servo drive designed for Retrofitting CNC machines and Robots. It supports Industrial AC and DC servos with up to 320V and 2kW (see specs for details).
Documentation about the PCB and pinout of the feedback connector:
https://github.com/rene-dev/stmbl/wiki/Pinouts
https://github.com/rene-dev/stmbl/wiki/PCB
Hardware version 4.1
Driving a Bosch Turboscara
https://www.youtube.com/watch?v=d6NH1W7DUnQ
https://www.youtube.com/watch?v=oTllxnYAgFc
Driving a Manutec Robot
https://www.youtube.com/watch?v=gwgnAeGjZrA
https://www.youtube.com/watch?v=wXLcAZwjlzE
Driving a Weeke BP12 VMC
https://www.youtube.com/watch?v=24LftGNp4MI
Driving a Haas VF0 (Spindle + Axes)
https://www.youtube.com/watch?v=kqenepupJIs
Drivetest
https://www.youtube.com/watch?v=-E1o_5cFyto
Supported Motors
- Synchronous AC Servos
- Asynchronous AC Servos
- DC Servos
- 2 Phase HF spindle motors
Supported Feedback systems
- Resolvers
- Incremental encoders
- sin/cos encoder interpolation
- Mitsubishi absolute encoders
- Sanyo Denki absolute encoders
- Yaskawa absolute encoders
- Sick HIPERFACE®
- Tamagawa SmartAbs
Planned:
- EnDat
- BiSS
- SSI
- Sanyo Denki wire-saving incremental encoder
Supported Position/Velocity Commands Inputs:
- Smartserial
- Quadrature
- Step/direction
- RS485
TODO
- Sensorless FOC
Directories
- hw/spice/ Spice simulation for resolver interface
- hw/kicad/v4.0/ kicad files for version 4
- src/ STM32F4 code, command, feedback and control loop
- stm32f303/ STM32F3 code, running on the HV side, generating PWM
Commercial Applications
Should you find the GPL license insufficient for your needs, other licenses can be purchased from my company.
Likewise, please contact us should you wish to fund the further development of this project, or are interesed in custom hardware, software, or commercial support.
Parts
562| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100n | stmbl:C_0603 | C1, C3, C6, C7, C11, C12, C13, C14, C15, C16, C17, C18, C19, C23, C26 |
| 7 | 1k | Resistors_SMD:R_0603 | R5, R10, R12, R13, R14, R15, R17 |
| 6 | R | Resistors_SMD:R_0402 | R3, R6, R7, R8, R9, R11 |
| 5 | C | stmbl:C_0603 | C5, C10, C20, C21, C22 |
| 4 | R | stmbl:R_0603 | R19, R22, R23, R24 |
| 3 | 22µ | stmbl:C_0805 | C2, C4, C24 |
| 2 | 18pF | stmbl:C_0603 | C8, C9 |
| 2 | 220 | Resistors_SMD:R_0603 | R4, R21 |
| 2 | CONN_02X25 | Pin_Headers:Pin_Header_Straight_2x25 | P2, P3 |
| 2 | LED | stmbl:LED-0805 | D2, D3 |
| 2 | R | Resistors_SMD:R_0805 | R16, R20 |
| 2 | testpoint | stmbl:Fiducial_1mm_Outer_CopperTop | T1, T2 |
| 1 | 6k49 | Resistors_SMD:R_0603 | R1 |
| 1 | BOOT0 | Capacitors_SMD:C_0603 | JP1 |
| 1 | C | stmbl:C_0805 | C25 |
| 1 | CAT250_EEPROM | mt25q:MLP8_8x6 | U4 |
| 1 | CONN_01X01 | Measurement_Points:Measurement_Point_Round-SMD-Pad_Big | J3 |
| 1 | CONN_01X04 | Pin_Headers:Pin_Header_Straight_1x04 | P6 |
| 1 | CONN_01X04 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | P5 |
| 1 | CRYSTAL_SMD_4pin | stmbl-kicad-lib:Crystal_SMD_0603_4Pads | X1 |
| 1 | D_Schottky | stmbl:SMA_Standard | D1 |
| 1 | HR911105_RJ45 | stmbl:HY951180A_RJ45 | J1 |
| 1 | KSZ8081 | stmbl:QFN-24-1EP_4x4mm_Pitch0.5mm | U1 |
| 1 | NCP1117ST33T3G | TO_SOT_Packages_SMD:SOT-223 | U3 |
| 1 | R | Resistors_SMD:R_0603 | R18 |
| 1 | SP3485EN | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U7 |
| 1 | STM32F407VETx | stmbl:LQFP-100_14x14mm_Pitch0.5mm | U2 |
| 1 | SW_PUSH | Buttons_Switches_SMD:SW_SPST_EVQQ2 | SW1 |
| 1 | USBLC6-4SC6 | TO_SOT_Packages_SMD:SOT-23-6 | U5 |
| 1 | USB_A | Connect:USB_A_Vertical | P4 |
| 1 | USB_OTG | stmbl:USB_Micro-B | P1 |
The 71 most common of 562 parts.
More from rene-dev/stmbl
12- 2 layers100 × 100 mm
- 4 layers42 × 42 mm
- 4 layers99.8 × 74.9 mm
- 2 layers100 × 100 mm
- 2 layers100 × 100 mm
- 2 layers99.9 × 99.9 mm
- 2 layers99.8 × 99.8 mm
- 2 layers100 × 100 mm
- 2 layers57 × 75 mm
- 2 layers87.5 × 50 mm
- 4 layers100 × 75 mm
Similar boards
- 2 layers59.2 × 66 mm
Ethernet bob
coon42/stmbl_otter
sudo dfu-util -d 0483:df11 -a 0 -s 0x8000000:leave -D objhvf3/hvf3.bin
785 parts1GPL-3.0 - 2 layers46.8 × 36.6 mm
- 4 layers120 × 100 mm
- 2 layers70 × 65 mm
Fluepdot
Fluepke/Fluepdot
Project for controlling Annax flipdot panels used by the Berliner Verkehrsbetriebe
116 parts17AGPL-3.0 - 4 layers270 × 34 mm
Io board
ReflexCreations/io-board
This repository contains source documents and manufacturing files for the RE:Flex Dance Pad's I/O Board. It was created using KiCAD 5.1.4.
95 parts8MIT - 2 layers65 × 35 mm
- 2 layers22 × 54.5 mm
- 2 layers100 × 100 mm
Questions
How big is the Ethernet bob PCB?
It measures 59.2 × 66 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Ethernet bob use?
562 parts, built around the SP3485EN-Y and USBLC6-4SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ethernet bob KiCad files?
From the rene-dev/stmbl repository on GitHub, at the commit this page was made from: the board is hw/kicad/bob/ethernet_bob/ethernet_bob.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ethernet bob design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).