2 layers51.4 × 32.3 mm
2 layers100 × 100 mm
Panel
dj505/Pad-Light-Kit3A PIU pad lighting upgrade kit, featuring a 5x5 RGB LED grid
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 91
- Nets
- 90
- Pads
- 338
- Tracks, vias
- 729, 35
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 20 Jan 2023
- Updated
- 20 Jul 2024
Overview
Panel is an open-source printed circuit board by dj505, from the dj505/Pad-Light-Kit repository on GitHub. It is a 2-layer board of 100 × 100 mm with 91 parts on 90 nets, routed with 729 tracks and 35 vias.
It is built around the RP2040, W25Q32JVSSIQ and SP3485EN-Y, with the WS2812B and SS34 among its other parts. Its parts include 27 diodes, 17 capacitors, 14 connectors, 13 resistors and 4 ICs. It belongs with the lEDs and displays boards and the RP2040 boards of this library.
Main components
5
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q32JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 133MHz 1uA 2.7V~3.6V 20 Years 32Mbit 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
SP3485EN-Y
SOP-8SOP-8 RS-485 / RS-422 ICs ROHSYLPTECRS-485 / RS-422 ICs
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
SS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
Addons/Comms Controller/README.mdComms Controller
This addon is meant for all current revisions of the Pad Light Kit main board. As of writing, the current revision is Rev. 3.
This addon allows patterns to be uploaded to the main board(s) over RS485. Don't mix up the RS485 and power connectors!
Parts
91| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D10, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24 +9 |
| 10 | 100nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C4, C5, C7, C8, C9, C12, C14, C15 |
| 5 | LOGO | LogoFootprints:Arrow_6 | G***, G***, G***, G***, G*** |
| 4 | Conn_01x02 | Connector_Molex:Molex_Mini-Fit_Jr_5569-02A2_2x01_P4.20mm_Horizontal | J6, J7, J8, J9 |
| 4 | LOGO | LogoFootprints:Arrow_15mm | G***, G***, G***, G*** |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R8, R10 |
| 2 | 10uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C13, C16 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3, C6 |
| 2 | 27 Ohm | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4, R5 |
| 2 | 27pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C10, C11 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R13 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R6, R7 |
| 2 | Conn_01x02 | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J14, J15 |
| 2 | Conn_01x03 | Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_Vertical | J11, J12 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2 |
| 1 | 12.000MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | 120 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12 |
| 1 | 3k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R9 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J10 |
| 1 | Conn_01x02 | Connector_JST:JST_XH_S2B-XH-A-1_1x02_P2.50mm_Horizontal | J3 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x07 | 35312-XX60:35312-0760 | J5 |
| 1 | Conn_02x06_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J4 |
| 1 | DNF | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3 |
| 1 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | LED_Small | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D28 |
| 1 | LOGO | LogoFootprints:CenterStep_6mm | G*** |
| 1 | LOGO | LogoFootprints:CenterStep_15mm | G*** |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | RP2040 | RP2040_minimal:RP2040-QFN-56 | U2 |
| 1 | SP3485EN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | SS34 | Diode_SMD:D_SMA_Handsoldering | D27 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J2 |
| 1 | W25Q32JVSS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U1 |
More from dj505/Pad-Light-Kit
3- 2 layers44 × 25 mm
- 2 layers55.9 × 41.3 mm
Similar boards
- 2 layers151 × 95 mm
Deneme
g210101021/OpenStylophone-RP2040
Overview • Technical Summary • Architecture • Hardware Audit & Remediation • Schematic Subsystems • PCB Layout • Firmware Roadmap • Bill of Materials • Author
143 parts - 2 layers67 × 42 mm
FuncGen
velechit/HomeLAB
A miniature electronics lab (Oscilloscope + FuncGen + Breadboard + Arduino) for hobbyists
72 partsGPL-3.0 - 2 layers184 × 80.5 mm
Prometheus PCB
TheContrappostoShop/Apollo
Control Board for the Prometheus mSLA Printer.
129 parts13CERN-OHL-S-2.0 - 2 layers210 × 31 mm
Trhw
nimitvijayvargee/trhw
This is an RP2040 ruler that implements wifi, bluetooth, BLE along with a 4MB Flash storage, LEDs, Input buttons and some cool units and lengths!
59 parts8 - 2 layers78.7 × 40.2 mm
- 2 layers101.4 × 137.7 mm
- 2 layers60 × 50 mm
- 4 layers50 × 88.5 mm
Questions
How big is the Panel PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Panel use?
91 parts, built around the RP2040, W25Q32JVSSIQ, SP3485EN-Y and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Panel KiCad files?
From the dj505/Pad-Light-Kit repository on GitHub, at the commit this page was made from: the board is Panel/Panel.kicad_pcb and its schematic Addons/Comms Controller/Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Panel design in my own project?
Its repository states no licence, so its author keeps all rights: ask dj505 before reusing the design.