Skip to the content
2 layers59.2 × 66 mmEthernet bob, the printed circuit board in 3D

sudo dfu-util -d 0483:df11 -a 0 -s 0x8000000:leave -D objhvf3/hvf3.bin

Size
59.2 × 66 mm
Copper layers
2
Thickness
1.6 mm
Parts
785
Nets
146
Pads
1,125
Tracks, vias
1,791, 97
Pours
6
Routed
Yes
KiCad
KiCad 4
Created
13 May 2018
Updated
13 May 2018

Overview

Ethernet bob is an open-source printed circuit board by coon42, from the coon42/stmbl_otter repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 59.2 × 66 mm with 785 parts on 146 nets, routed with 1,791 tracks and 97 vias.

It is built around the SP3485EN-Y and USBLC6-4SC6. Its parts include 26 capacitors, 21 resistors, 7 connectors, 6 ICs and 1 diode. It belongs with the interfaces and adapters boards and the STM32 boards of this library.

Main components

2

README

README.md

How to use with skateboard:

  • For some reason you need exactly this compiler: gcc-arm-none-eabi-5_4-2016q3

  • On any newer gcc version, the board does not boot after flashing !?

  • Adjust path in TOOLCHAIN variable in toolchain.mak file

  • The board works correctly if the green LED lights up. When receiving data over UART the LED flashes blue.

  • Compile code:

make -f stm32f303/Makefile
  • Bridge pins for DFU mode while plugging in USB cable
  • Flash by using the following command:
sudo dfu-util -d 0483:df11 -a 0 -s 0x8000000:leave -D obj_hvf3/hvf3.bin

You meight also adjust some stuff in main.c (PID controller params etc.)

...

STMBL is an open source servo drive designed for retrofitting CNC machines and robots. It supports industrial AC and DC servo motors with up to 320V and 1kW.

Join the chat at https://gitter.im/rene-dev/stmbl (click to chat with us)

Build Status (click for build log)

Disclaimer

THE AUTHORS OF THIS SOFTWARE ACCEPT ABSOLUTELY NO LIABILITY FOR ANY HARM OR LOSS RESULTING FROM ITS USE. IT IS EXTREMELY UNWISE TO RELY ON SOFTWARE ALONE FOR SAFETY. Any machinery capable of harming persons must have provisions for completely removing power from all motors, etc, before persons enter any danger area. All machinery must be designed to comply with local and national safety codes, and the authors of this software can not, and do not, take any responsibility for such compliance.

This software is released under the GPLv3.

STMBL

There is a wiki. https://github.com/rene-dev/stmbl/wiki There will be documentation.

IRC: #stmbl on irc.hackint.eu https://webirc.hackint.org/#stmbl

Documentation about the PCB and pinout of the feedback connector:

https://github.com/rene-dev/stmbl/wiki/Pinouts

https://github.com/rene-dev/stmbl/wiki/PCB

Hardware version 4.0

top bot

Driving a Bosch Turboscara

https://www.youtube.com/watch?v=d6NH1W7DUnQ

Driving a Manutec Robot

https://www.youtube.com/watch?v=gwgnAeGjZrA
https://www.youtube.com/watch?v=wXLcAZwjlzE

Drivetest

https://www.youtube.com/watch?v=-E1o_5cFyto

Supported Motors
  • Synchronous AC Servos
  • DC Servos
  • 2 Phase HF spindle motors
  • IRAMX Hardware testet up to 320V
Supported Feedback systems
  • Resolvers
  • Incremental encoders
  • sin/cos encoder interpolation
  • Mitsubishi absolute encoders
  • Sanyo Denki absolute encoders
  • Yaskawa absolute encoders
  • Sick HIPERFACE®
Planned:
  • EnDat
  • BiSS
  • SSI
  • Sanyo Denki wire-saving incremental encoder
Supported Position/Velocity Commands Inputs:
  • Smartserial
  • Quadrature
  • Step/direction
  • RS485
TODO
  • AC Async
Directories
  • hw/eagle/ Eagle board files and schematics
  • hw/spice/ Spice simulation for resolver interface
  • src/ STM32F4 code, command, feedback and control loop
  • stm32f103/ STM32F1 code, running on the HV side, generating PWM
  • bootloader/ bootloader for the f4

Parts

785
QtyValueFootprintReferences
15100nCapacitors_SMD:C_0603C1, C3, C6, C7, C11, C12, C13, C14, C15, C16, C17, C18, C19, C23, C26
91kResistors_SMD:R_0603R2, R5, R10, R12, R13, R14, R15, R17, R19
6RResistors_SMD:R_0402R3, R6, R7, R8, R9, R11
4CCapacitors_SMD:C_0603C10, C20, C21, C22
322µCapacitors_SMD:C_0805C2, C4, C24
218pFCapacitors_SMD:C_0603C8, C9
2220Resistors_SMD:R_0603R4, R21
2CONN_01X04Pin_Headers:Pin_Header_Straight_1x04P5, P6
2CONN_02X25Pin_Headers:Pin_Header_Straight_2x25P2, P3
2RResistors_SMD:R_0805R16, R20
16k49Resistors_SMD:R_0603R1
1BOOT0Capacitors_SMD:C_0603JP1
1CCapacitors_SMD:C_0805C25
1CCapacitors_SMD:C_0402C5
1CAT250_EEPROMmt25q:MLP8_8x6U4
1CRYSTAL_SMD_4pinCrystals:Crystal_SMD_0603_4PadsX1
1D_SchottkyDiodes_SMD:MiniMELF_StandardD1
1HR911105_RJ45rj45_MHRJJ88NFVS:HY951180AJ1
1KSZ8081Housings_DFN_QFN:QFN-24-1EP_4x4mm_Pitch0.5mmU1
1NCP1117ST33T3GTO_SOT_Packages_SMD:SOT-223U3
1RResistors_SMD:R_0603R18
1SP3485ENHousings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mmU7
1STM32F407VETxHousings_QFP:LQFP-100_14x14mm_Pitch0.5mmU2
1SW_PUSHButtons_Switches_SMD:SW_SPST_EVQQ2SW1
1USBLC6-4SC6TO_SOT_Packages_SMD:SOT-23-6U5
1USB_AConnect:USB_A_VerticalP4
1USB_OTGstmbl:USB_Micro-B_10103594-0001LFP1

The 64 most common of 785 parts.

More from coon42/stmbl_otter

2
  • 2 layers100 × 100 mmStmbl 4.0, the printed circuit board in 3D

    Stmbl 4.0

    coon42/stmbl_otter

    sudo dfu-util -d 0483:df11 -a 0 -s 0x8000000:leave -D objhvf3/hvf3.bin

    425 parts1GPL-3.0
  • 2 layers94 × 46 mmRectifier, the printed circuit board in 3D

    Rectifier

    coon42/stmbl_otter

    sudo dfu-util -d 0483:df11 -a 0 -s 0x8000000:leave -D objhvf3/hvf3.bin

    10 parts1GPL-3.0

Similar boards

  • 4 layers59.2 × 66 mmEthernet bob, the printed circuit board in 3D

    Ethernet bob

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    562 parts990GPL-3.0
  • 2 layers46.8 × 36.6 mmUploader, the printed circuit board in 3D

    Uploader

    gchq-net/hexpansion_hardware

    Hardware for the hexpansions

    18 parts2CERN-OHL-P-2.0
  • 4 layers120 × 100 mmBsc, the printed circuit board in 3D

    Bsc

    shining-man/bsc_hw

    Hardware battery safety controller (BSC)

    286 parts31MIT
  • 2 layers70 × 65 mmFluepdot, the printed circuit board in 3D

    Fluepdot

    Fluepke/Fluepdot

    Project for controlling Annax flipdot panels used by the Berliner Verkehrsbetriebe

    116 parts17AGPL-3.0
  • 4 layers270 × 34 mmIo board, the printed circuit board in 3D

    Io board

    ReflexCreations/io-board

    This repository contains source documents and manufacturing files for the RE:Flex Dance Pad's I/O Board. It was created using KiCAD 5.1.4.

    95 parts8MIT
  • 2 layers65 × 35 mmJuksautin, the printed circuit board in 3D

    Juksautin

    zouppen/pumpunjuksautin

    Tricking NTC thermistor on a heat pump

    27 parts7GPL-3.0
  • 2 layers22 × 54.5 mmPrpd hardware, the printed circuit board in 3D

    Prpd hardware

    BenediktSeidl/prpd

    Read data from NEDAP PowerRouter via HTTP or RS485

    16 parts6GPL-3.0
  • 2 layers100 × 100 mmPanel, the printed circuit board in 3D

    Panel

    dj505/Pad-Light-Kit

    A PIU pad lighting upgrade kit, featuring a 5x5 RGB LED grid

    91 parts3

Questions

How big is the Ethernet bob PCB?

It measures 59.2 × 66 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ethernet bob use?

785 parts, built around the SP3485EN-Y and USBLC6-4SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ethernet bob KiCad files?

From the coon42/stmbl_otter repository on GitHub, at the commit this page was made from: the board is hw/kicad/bob/ethernet_bob/ethernet_bob.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ethernet bob design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).