

Glhfkbd
Features: - Extremely minimalist design -- no bevels, no edges, just keys! - Split body, for da ergonomics - Row-staggered, for da muscle memory - A "Y" and "B" key on both halves, for da bad typists - Supports hotswap…
- Size
- 296.5 × 103.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 212
- Nets
- 185
- Pads
- 1,032
- Tracks, vias
- 1,655, 283
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 24 Nov 2025
- Updated
- 9 Dec 2025
Overview
Glhfkbd is an open-source printed circuit board by redhotvengeance, from the redhotvengeance/glhfkbd repository on GitHub, published under the MIT licence. It is a 2-layer board of 296.5 × 103.6 mm with 212 parts on 185 nets, routed with 1,655 tracks and 283 vias.
It is built around the STM32F072CBT6, USBLC6-2SC6 and TPS2116DRL. Its parts include 62 diodes, 24 resistors, 22 capacitors, 10 ICs and 6 connectors. It belongs with the keyboards and input boards and the STM32 boards of this library.
Main components
3STM32F072CBT6
LQFP-48(7x7)-40℃~+85℃ 1.65V~3.6V 128KB 12bit 12bit 16KB 32 Bit 37 48MHz ARM Cortex-M0 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)TPS2116DRL
SOT-583Operating status indication SOT-583 Power Management - Specialized ROHSTexas InstrumentsPower Distribution Switches
README
README.mdglhfkbd

A custom, split keyboard.
Features:
- Extremely minimalist design -- no bevels, no edges, just keys!
- Split body, for da ergonomics
- Row-staggered, for da muscle memory
- A "Y" and "B" key on both halves, for da bad typists
- Supports hotswap MX sockets
- Fully embedded electronics -- no dev boards!
- USB-C for the wired interconnect -- no live TRRS shorts!
- Either side can act as the host
- Driven by QMK firmware and fully customizable
PCB
The PCB is all one unit, despite both halves of the keyboard being asymmetrical. Mouse bites are used to easily separate pieces. All gerbers are provided in this repo.

All electronics are embedded into the board itself. This eliminates the need for a dev board, but requires assembly by a PCB manufacturer. BOM and position files are provided in this repo.

Case
All pieces for the case are provided as STEP files in this repo, with the exception of the switch plates, which are provided as PCB files so they can be manufactored in FR4.
Switch plates (required)
Found in the pcb folder. Should be printed as non-copper and non-trace PCBs.
Filler layer (optional)
3D printed layer that sites between the plates and PCBs (to fill the space between switches). Used for aesthetics and sound.

Standoff layer (required)
Used to mount the PCBs and plates to the base. Can be easily 3D printed. Needs heat-set inserts added.

Base (required)
Bottom of the keyboard. Can be 3D printed. Should have rubber feet added for stability.

As an upgrade, the base can be laser cut from metal. This adds weight, quality, and improved sound. I suggest using a ferrous metal (like carbon steel) so that each keyboard half can be easily attached to a magsafe stand for easy tenting.
Sharing
Fully open source. Feel free to build it yourself.
Parts
212| Qty | Value | Footprint | References |
|---|---|---|---|
| 58 | D_Small | footprints:diode_sod123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +42 |
| 58 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1u | MX1, MX2, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX23 +42 |
| 16 | MountingHole_2.2mm_M2 | MountingHole:MountingHole_2.2mm_M2 | M2, M2, M2, M2, M2, M2, M2, M2, M2, M2, M2, M2, M2, M2, M2, M2 |
| 10 | 100n | footprints:cap_100nf | C2, C3, C4, C5, C10, C11, C12, C13, C21, C22 |
| 8 | 9k1 | footprints:res_9k1 | R7, R8, R9, R10, R13, R14, R15, R16 |
| 6 | 10u | footprints:cap_10uf | C1, C9, C17, C18, C19, C20 |
| 4 | 10k | footprints:res_10k | R18, R20, R23, R24 |
| 4 | 120 | footprints:res_120 | R5, R6, R11, R12 |
| 4 | 1u | footprints:cap_1uf | C7, C8, C15, C16 |
| 4 | 500mA Polyfuse | footprints:fuse_500ma | F1, F2, F3, F4 |
| 4 | 5k1 | footprints:res_5k1 | R1, R2, R3, R4 |
| 4 | USB2.0_16P | footprints:usb-c | J1, J2, J3, J4 |
| 4 | USBLC6-2SC6 | footprints:usblc6-2sc6 | U3, U4, U5, U6 |
| 2 | 10n | footprints:cap_10nf | C6, C14 |
| 2 | 120R | footprints:ferrite | FB1, FB2 |
| 2 | 1k | footprints:res_1k | R21, R22 |
| 2 | 33k | footprints:res_33k | R17, R19 |
| 2 | Conn_01x05_Socket | Connector_PinHeader_1.00mm:PinHeader_1x05_P1.00mm_Vertical | J7, J8 |
| 2 | D_Schottky | footprints:schottky | D59, D60 |
| 2 | RED | footprints:led | D61, D62 |
| 2 | STM32F072CBT6 | footprints:stm32 | U1, U2 |
| 2 | SW_Push | footprints:switch | SW1, SW2 |
| 2 | TPS2116DRL | footprints:tps2116drlr | U7, U8 |
| 2 | XC6206PxxxMR | footprints:xc6206 | U9, U10 |
The 206 most common of 212 parts.
Similar boards
- 2 layers100 × 100 mm

- 2 layers171 × 50.5 mm

Ctrl M
nuess0r/ctrl-M
Replacement controller for the famous IBM Model M keyboard based on the STM32F072 microcontroller. Supported by QMK.
39 parts20 - 2 layers391.2 × 166.5 mm

Takt11800
vuckale/takt11800
Replacement PCB for Cherry G80 11800/Compaq MX 11800 keyboard using QMK firmware and VIA
284 parts12CERN-OHL-S-2.0 - 4 layers228.2 × 80.6 mm

- 4 layers100 × 50 mm

Chronolog
slemanz/chronolog
STM32-based temperature data logger with RTC, NOR flash storage, LCD and Wi-Fi. Hardware and firmware.
95 parts5 - 2 layers216 × 100.5 mm

- 2 layers50 × 18 mm

Majestouch stm32
mbtech-nl/majestouch-stm32
Drop-in replacement controller for the full-size Filco Majestouch: STM32F072, QMK with NKRO over USB. KiCad 9 board, hand-solderable.
20 parts2MIT - 2 layers226.5 × 75 mm

Superposition rounded
xommmmmmmm/superposition-borked
A Planck drop-in solder/Mill-Max PCB for Choc v2 and KS-33, with Ortho/Alpha Stagger and various bottom rows.
144 parts2
Questions
How big is the Glhfkbd PCB?
It measures 296.5 × 103.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Glhfkbd use?
212 parts, built around the STM32F072CBT6, USBLC6-2SC6 and TPS2116DRL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Glhfkbd KiCad files?
From the redhotvengeance/glhfkbd repository on GitHub, at the commit this page was made from: the board is pcb/glhfkbd.kicad_pcb and its schematic pcb/glhfkbd.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Glhfkbd design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).