4 layers95 × 95 mm
Cube motherboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
52 parts1.1kGPL-3.0
2 layers37 × 57.4 mm
MeshTemps
rasusmilch/MeshTemps- Size
- 37 × 57.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 42
- Pads
- 61
- Tracks, vias
- 37, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Nov 2025
- Updated
- 19 Jun 2026
Overview
MeshTemps is an open-source printed circuit board by rasusmilch, from the rasusmilch/MeshTemps repository on GitHub. It is a 2-layer board of 37 × 57.4 mm with 7 parts on 42 nets, routed with 37 tracks and 0 vias.
It is built around the ESP32-S3-DEVKITC-1-N8. Its parts include 3 resistors, 3 connectors and 1 IC. It belongs with the ESP32 boards of this library.
Main components
1Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 51R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R12 |
| 2 | Conn_01x03 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J1, J2 |
| 1 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | Conn_01x05 | Connector_Molex:Molex_KK-254_AE-6410-05A_1x05_P2.54mm_Vertical | J3 |
| 1 | ESP32-S3-DevKitC | PCM_Espressif:ESP32-S3-DevKitC | U1 |
Questions
How big is the MeshTemps PCB?
It measures 37 × 57.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MeshTemps use?
7 parts, built around the ESP32-S3-DEVKITC-1-N8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MeshTemps KiCad files?
From the rasusmilch/MeshTemps repository on GitHub, at the commit this page was made from: the board is Kicad/MeshTemps/MeshTemps.kicad_pcb and its schematic Kicad/MeshTemps/MeshTemps.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MeshTemps design in my own project?
Its repository states no licence, so its author keeps all rights: ask rasusmilch before reusing the design.
Similar boards
- 2 layers129.9 × 63.6 mm
Traeger rev 2.3.0.kicad pro
jazzmonger/Traeger-PID-Controller
Traeger Smoker/Grill Controller based on an
45 parts36 - 2 layers168.8 × 78.9 mm
Gameboy3
ohasanov-hbrw/tribit32-advanced
A tri-microcontroller, overengineered GameBoy Advance clone. More value was given to the controls and the exterior look, which is cool!
61 parts8 - 2 layers134.6 × 49.5 mm
- 2 layers90 × 102 mm
- 2 layers119.4 × 98.9 mm
PCB Pami
FIPATECH/CDFR26_PAMI
Open source firmware and PCB for a differential mobile robot (PAMI) based on ESP32-S3 - Coupe de France de Robotique
25 parts6 - 2 layers76.2 × 40.6 mm
EspressifESP32toExpressAdaptor
dnhutchins/ETC_Express_Reverse_Eng
The ultimate goal of this work is to develop an interface to use the control surface from a legacy ETC Express 24/48 lighting controller as a modern EOSNomad compatible programming and fader wing.
3 parts5 - 2 layers
E ink multi sensor
heckler/esphome-device-configs
Configuration definitions for local ESPHome files
11 parts4Apache-2.0