2 layers99 × 81.6 mm
PCB CONTROLADORA SOLDAGEM
Luk13g/SMD_Solder_Reflow
Soldering system for SMD electronic components on PCBs, adapted in a domestic electric oven
40 parts2MIT
2 layers129.9 × 63.6 mm
Traeger rev 2.3.0.kicad pro
jazzmonger/Traeger-PID-Controller36Traeger Smoker/Grill Controller based on an
- Size
- 129.9 × 63.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 64
- Pads
- 185
- Tracks, vias
- 558, 7
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Mar 2025
- Updated
- 19 Sep 2026
Overview
Traeger rev 2.3.0.kicad pro is an open-source printed circuit board by jazzmonger, from the jazzmonger/Traeger-PID-Controller repository on GitHub. It is a 2-layer board of 129.9 × 63.6 mm with 45 parts on 64 nets, routed with 558 tracks and 7 vias.
It is built around the ESP32-S3-DEVKITC-1-N8, HLK-PM01 and MAX6675ISA+, with the BC547 among its other parts. Its parts include 14 resistors, 9 connectors, 4 diodes, 3 transistors and 3 switches. It belongs with the ESP32 boards of this library.
Main components
4
ESP32-S3-DEVKITC-1-N8
-- WiFi Modules ROHSEspressif SystemsWiFi Modules
HLK-PM01
DIP,34x24mm0.1W 100mVp-p 15mm 20mm 34mm 3W 3kV 5V 700mA 73% 85VAC~265VAC AC-DC Short Circuit Protection、Over Current Protection、Fault self-recovery ±0.2% 插件,34x20mm AC-DC Power Modules ROHSHI-LINKAC-DC Power Modules
MAX6675ISA+
SOIC-8-20℃~+85℃ 3V~5.5V SPI SOIC-8 Interface - Specialized ROHSMaxim Integrated (Analog Devices)Interface - Specialized
BC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 150k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R5, R7, R8 |
| 4 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R15, R16, R21, R23 |
| 4 | MH | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R6, R13 |
| 3 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3, R10 |
| 3 | BC547 | Package_TO_SOT_THT:TO-92L_Inline | Q1, Q2, Q6 |
| 3 | LED | LED_THT:LED_D3.0mm | D1, D2, D7 |
| 2 | MOUNTINGHOLE2.5 | MOUNTINGHOLE_2.5_PLATED | U$18, U$19 |
| 2 | Temp Sensors | TerminalBlock_RND:TerminalBlock_RND_205-00014_1x04_P5.00mm_Horizontal | J7, J8 |
| 1 | 100uf | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | 15A Mains | Fuse:Fuse Block 3544-2_KEYSTONE | F1 |
| 1 | ADS1115 0x49 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J6 |
| 1 | Auger 1 Relay | Relay_THT:RELAY_G3MB-202PDC5 | K3 |
| 1 | Buttons | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J10 |
| 1 | Conn_01x06_Socket | TerminalBlock_RND:TerminalBlock_RND_205-00005_1x06_P5.00mm_Horizontal | J9 |
| 1 | Conn_01x06_Socket | Connector_JST:JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical | Touch1 |
| 1 | Conn_01x08_Socket | Connector_JST:JST_EH_B8B-EH-A_1x08_P2.50mm_Vertical | Display1 |
| 1 | ESP32-S3-DevKitC | PCM_Espressif:ESP32-S3-DevKitC | U1 |
| 1 | Fan Relay | Relay_THT:RELAY_G3MB-202PDC5 | K1 |
| 1 | HLK-PM01 | Converter_ACDC:Converter_ACDC_Hi-Link_HLK-PMxx | PS1 |
| 1 | Igniter 1 Relay | Relay_THT:RELAY_G3MB-202PDC5 | K6 |
| 1 | MAX31865-RTD | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J3 |
| 1 | MAX6675 | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J1 |
| 1 | POWER ON LED | LED_THT:LED_D3.0mm | D9 |
| 1 | Rotary Encoder | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J5 |
| 1 | Time of Flight Sensor | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J2 |
Questions
How big is the Traeger rev 2.3.0.kicad pro PCB?
It measures 129.9 × 63.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Traeger rev 2.3.0.kicad pro use?
45 parts, built around the ESP32-S3-DEVKITC-1-N8, HLK-PM01, MAX6675ISA+ and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Traeger rev 2.3.0.kicad pro KiCad files?
From the jazzmonger/Traeger-PID-Controller repository on GitHub, at the commit this page was made from: the board is Traeger rev 2.3.0.kicad_pro.kicad_pcb and its schematic Traeger rev 2.2.0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Traeger rev 2.3.0.kicad pro design in my own project?
Its repository states no licence, so its author keeps all rights: ask jazzmonger before reusing the design.
Similar boards
- 2 layers100 × 50 mm
Power board
ikatkov/hot-plate
The heating is not uniform (enough?). The father points of the hotplate are 5C colder than the center, where the ceramic heating element is located.
22 partsGPL-3.0 - 2 layers124 × 112 mm
VentSense Stage2
Aryan-swag/VentSense
VentSense: 2-of-3 gas/temperature/voltage early warning and per-cell isolation for small Li-ion packs. Vishwakarma Awards 2026-27 Stage 2 (VK26-IITH-SE-0279)
93 parts - 2 layers270.6 × 182.2 mm
Smarthomeiot
haripradhap14/ESP32-4CH-Relay-Controller-
4-channel IoT relay controller using ESP32-WROOM-32E for home automation.
31 parts1 - 2 layers130 × 80 mm
- 2 layers
IoT ESP switch relay
AdharTechnologies/ESP8266_D1_MINI_IoT_switch
kindly read this blog for full understanding: https://docs.google.com/document/d/e/2PACX-1vSAi6zmGvRynDwEvqRe5kNtlbvMZqgKHYD9E6emAaTxG17WCHXLFxFSK3p-E7R5uc0UGJ3i0j8vB/pub
8 partsMIT - 2 layers125.5 × 129.5 mm
Home automation pcb
ayannsinghhh/home-automation-esp32-pcb
This project is a custom-designed home automation PCB built using an ESP32, aimed at controlling multiple household appliances through relay switching.
36 parts - 2 layers58 × 50 mm
