2 layers260 × 440 mm
Multical
Samuelmathe/TFC-Multicanal-Goma
TFC ULPGL Goma - Systeme IoT multicanal de sous-comptage energetique (ESP32, KiCad, Flutter)
67 parts
2 layers130 × 80 mm
ArduinoNanoPjt1
thihakyawjob/PCBDesign1All PCB Files
- Size
- 130 × 80 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 62
- Nets
- 61
- Pads
- 168
- Tracks, vias
- 274, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 May 2020
- Updated
- 30 Jun 2021
Overview
ArduinoNanoPjt1 is an open-source printed circuit board by thihakyawjob, from the thihakyawjob/PCBDesign repository on GitHub. It is a 2-layer board of 130 × 80 mm with 62 parts on 61 nets, routed with 274 tracks and 0 vias.
It is built around the HLK-PM01, DHT11 and ULN2003A, with the BC547 among its other parts. Its parts include 14 connectors, 9 resistors, 4 capacitors, 3 diodes and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4
HLK-PM01
DIP,34x24mm0.1W 100mVp-p 15mm 20mm 34mm 3W 3kV 5V 700mA 73% 85VAC~265VAC AC-DC Short Circuit Protection、Over Current Protection、Fault self-recovery ±0.2% 插件,34x20mm AC-DC Power Modules ROHSHI-LINKAC-DC Power Modules
DHT11
SIP-4-20℃~+60℃ 1mA 3.3V~5.5V 5%RH~95%RH ±2℃ ±5%RH SIP-4 Temperature and Humidity Sensor ROHSAosong ElecTemperature And Humidity Sensor
ULN2003A
SOP-16-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 50V Seven channels SOP-16 Darlington Transistor Arrays ROHSUMWDarlington Transistor Arrays
BC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)
README
README.mdPCBDesign
All PCB Files
Parts
62| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | +5V, +5V, GND, GND, GND, GND, GND, GND, GND, GND, GND, GND |
| 4 | 2K2 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R1, R6, R7, R8 |
| 4 | CONN_01X01 | Socket_Arduino_Nano:1pin_Nano | P3, P4, P5, P6 |
| 4 | Jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1, JP2, JP3, JP4 |
| 2 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 2 | LED | LED_THT:LED_D5.0mm | D1, D2 |
| 2 | SW-UART | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4, J5 |
| 1 | 100 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R9 |
| 1 | 100nF | Capacitor_THT:C_Rect_L4.6mm_W2.0mm_P2.50mm_MKS02_FKP02 | C4 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C3 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R5 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | 1N5819 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D3 |
| 1 | 1uF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C2 |
| 1 | 2K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R3 |
| 1 | 4.6K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R4 |
| 1 | 47K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R2 |
| 1 | Analog | Socket_Arduino_Nano:Socket_Strip_Arduino_1x15 | P2 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_15x7.5RM7.6 | BZ1 |
| 1 | Conn_01x05_Male | Connector_JST:JST_EH_B5B-EH-A_1x05_P2.50mm_Vertical | J6 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J8 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U1 |
| 1 | Digital | Socket_Arduino_Nano:Socket_Strip_Arduino_1x15 | P1 |
| 1 | HLK-PM01 | Converter_ACDC:Converter_ACDC_HiLink_HLK-PMxx | PS1 |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Jack-DC | Connector_BarrelJack:BarrelJack_Wuerth_6941xx301002 | J7 |
| 1 | LOGO | thiha:transtaklogo5 | G*** |
| 1 | L_Core_Ferrite | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | L1 |
| 1 | SANYOU_SRD_Form_C | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K1 |
| 1 | SW_DIP_x01 | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J2 |
| 1 | ULN2003A | thiha:DIP-16_W7.62mm | U2 |
| 1 | Varistor | Varistor:RV_Disc_D7mm_W4.2mm_P5mm | RV1 |
The 57 most common of 62 parts.
Questions
How big is the ArduinoNanoPjt1 PCB?
It measures 130 × 80 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ArduinoNanoPjt1 use?
62 parts, built around the HLK-PM01, DHT11, ULN2003A and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ArduinoNanoPjt1 KiCad files?
From the thihakyawjob/PCBDesign repository on GitHub, at the commit this page was made from: the board is ArduinoNano_TrainingBoard/Kicad/ArduinoNanoPjt1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ArduinoNanoPjt1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask thihakyawjob before reusing the design.
Similar boards
- 2 layers132 × 130 mm
- 2 layers200 × 100 mm
Smart home
vishal007-hacker/smart-home
ESP32-based smart home controller for switching 4 independent 230V AC loads, with per-channel current and voltage sensing, manual override buttons, status LEDs, and an I²C LCD display.
76 parts - 2 layers95 × 55 mm
Smarthome v0.1
whysixmift/smarthome_v0.1
I wanted to control lights and appliances in my room over Wi-Fi without having loose relay modules, breadboards, and 220V AC wires floating around my desk.
63 parts - 2 layers150 × 110 mm
Lab
Yashwanth786/Centralized_Power_Distribution_System
University EE labs share 10 workbenches between many student groups. Today, a lab staff member must physically walk to each table to switch power on or off, and there is no record of who used which table, when, or for…
48 parts - 2 layers99.6 × 69.8 mm
- 2 layers80 × 64.5 mm
- 2 layers129.9 × 63.6 mm
Traeger rev 2.3.0.kicad pro
jazzmonger/Traeger-PID-Controller
Traeger Smoker/Grill Controller based on an
45 parts36