2 layers99.6 × 69.8 mm
2 layers80 × 64.5 mm
TermoCloud
icapa/termocloud_pcbTermocloud pcb kicad version
- Size
- 80 × 64.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 60
- Pads
- 121
- Tracks, vias
- 127, 1
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 22 Mar 2018
- Updated
- 7 Jan 2019
Overview
TermoCloud is an open-source printed circuit board by icapa, from the icapa/termocloud_pcb repository on GitHub. It is a 2-layer board of 80 × 64.5 mm with 28 parts on 60 nets, routed with 127 tracks and 1 via.
It is built around the HLK-PM01, DHT11 and BC817. Its parts include 7 resistors, 7 connectors, 6 ICs, 3 capacitors and 2 diodes.
Main components
3
HLK-PM01
DIP,34x24mm0.1W 100mVp-p 15mm 20mm 34mm 3W 3kV 5V 700mA 73% 85VAC~265VAC AC-DC Short Circuit Protection、Over Current Protection、Fault self-recovery ±0.2% 插件,34x20mm AC-DC Power Modules ROHSHI-LINKAC-DC Power Modules
DHT11
SIP-4-20℃~+60℃ 1mA 3.3V~5.5V 5%RH~95%RH ±2℃ ±5%RH SIP-4 Temperature and Humidity Sensor ROHSAosong ElecTemperature And Humidity Sensor
BC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)
README
README.mdtermocloud_pcb
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 2K2 | Resistors_SMD:R_0603 | R4, R5, R6 |
| 3 | 4N25 | Housings_DIP:DIP-6_W7.62mm | U2, U3, U4 |
| 3 | Screw_Terminal_01x01 | Connectors:1pin | J5, J6, J7 |
| 2 | 160 | Resistors_SMD:R_0603 | R1, R2 |
| 2 | 1N4148 | Diodes_SMD:D_SMB | D1, D2 |
| 2 | BC817 | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2 |
| 2 | Screw_Terminal_01x02 | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_2pol | J1, J4 |
| 1 | 100nF | Capacitors_SMD:C_0603 | C3 |
| 1 | 100nF | Capacitors_SMD:C_0603_HandSoldering | C1 |
| 1 | 10K | Resistors_SMD:R_0603 | R7 |
| 1 | 480 | Resistors_SMD:R_0603 | R3 |
| 1 | CP | Capacitors_Tantalum_SMD:CP_Tantalum_Case-A_EIA-3216-18_Reflow | C2 |
| 1 | DHT11 | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_4pol | U5 |
| 1 | Fuse | Fuse_Holders_and_Fuses:Fuseholder5x20_horiz_SemiClosed_Casing10x25mm | F1 |
| 1 | HLK-PM01 | TermoCloud:HLK-PM01 | U6 |
| 1 | RELE_THT_BI_5V | Relays_THT:RELE_THT_2Coin | U1 |
| 1 | Raspberry_Pi_2_3 | TermoCloud:RPi_Zero | J2 |
| 1 | Screw_Terminal_01x02 | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_PT-3.5mm_2pol | J3 |
Questions
How big is the TermoCloud PCB?
It measures 80 × 64.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TermoCloud use?
28 parts, built around the HLK-PM01, DHT11 and BC817. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TermoCloud KiCad files?
From the icapa/termocloud_pcb repository on GitHub, at the commit this page was made from: the board is PCB/TermoCloud.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TermoCloud design in my own project?
Its repository states no licence, so its author keeps all rights: ask icapa before reusing the design.
Similar boards
- 2 layers130 × 80 mm
- 2 layers121 × 54 mm
- 2 layers98 × 50 mm
- 2 layers122.5 × 88 mm
- 2 layers99 × 90.1 mm
Shield STM32 Bluepill
Rdisrael/KiCad-Projeto-Ensino-
Repository of projects carried out during the teaching project. contains: booklets, five projecs and KiCad files
70 parts2 - 2 layers99 × 90.1 mm
Shield STM32 Bluepill
Rdisrael/Projeto-Bluepill
Projeto de uma placa educacional usando o modulo Bluepill. Realizado em parceira com o professor Rogério Dantas.
76 parts - 2 layers121 × 68 mm
Freeds sanchez
pablozg/freeds
Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora
42 parts108