

An Psion to USB keyboard controller
- Size
- 68.6 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 41
- Pads
- 95
- Tracks, vias
- 170, 15
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Nov 2016
- Updated
- 31 Aug 2022
Overview
TestRig is an open-source printed circuit board by RasmusB, from the RasmusB/USB-Keyboard-Adapter repository on GitHub. It is a 2-layer board of 68.6 × 53.3 mm with 18 parts on 41 nets, routed with 170 tracks and 15 vias.
It is built around the ARDUINO UNO R3. Its parts include 3 connectors and 2 switches. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdUSB-Keyboard-Adapter
An ATmega32u4 based keyboard controller. This was designed for use with a Psion Series 5mx keyboard, but should work for other keyboards also.
- PCB contains KiCad files for the device itself
- Firmware/Psion-Keyboard-Firmware contains an Arduino sketch for the firmware
- Firmware/ScanTheMatrix is a sketch for scanning the matrix of a keyboard. This is only meant as a tool to map a keyboard with an unknown pinout.
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | MH1, MH2, MH3 |
| 1 | 3D Model Dummy | TestRig:USB_KEYBOARD_ADAPTER_V1.22_DUMMY | K2 |
| 1 | AVR-ISP-6 | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J2 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3_WithMountingHoles | A1 |
| 1 | GND | RB-Connectors:Mill-Max_7911-0-15-20-86-14-11-0 | TP9 |
| 1 | MISO | RB-Connectors:Mill-Max_7911-0-15-20-86-14-11-0 | TP5 |
| 1 | MOSI | RB-Connectors:Mill-Max_7911-0-15-20-86-14-11-0 | TP6 |
| 1 | PCB Jig 3D model | TestRig:PCB_JIG | K1 |
| 1 | SCK | RB-Connectors:Mill-Max_7911-0-15-20-86-14-11-0 | TP7 |
| 1 | To DUT | RB-SMD-Connectors:FPC_0.5mm_22p-MOLEX_52437 | J3 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J1 |
| 1 | USB_D+ | RB-Connectors:Mill-Max_7911-0-15-20-86-14-11-0 | TP2 |
| 1 | USB_D- | RB-Connectors:Mill-Max_7911-0-15-20-86-14-11-0 | TP3 |
| 1 | VBUS | RB-Connectors:Mill-Max_7911-0-15-20-86-14-11-0 | TP1 |
| 1 | VCC | RB-Connectors:Mill-Max_7911-0-15-20-86-14-11-0 | TP4 |
| 1 | ~RST | RB-Connectors:Mill-Max_7911-0-15-20-86-14-11-0 | TP8 |
More from RasmusB/USB-Keyboard-Adapter
2- 2 layers164 × 73 mm

- 2 layers28 × 18 mm

Similar boards
- 2 layers68.8 × 53.6 mm

Relatively Universal ROM Programmer
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
149 parts257GPL-3.0 - 2 layers69.1 × 53.8 mm

Motor controller
AlanFord/self-balancing-stick
Dual Axis Reaction Wheel Inverted Pendulum
25 parts79MIT - 2 layers68.6 × 53.3 mm

Protogasm Board V2
Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.
14 parts67MIT - 2 layers53.8 × 69.6 mm

EVSE V2 2
PedroCNeves/AC_ChargingStation
A learning project to create an EV AC Charging station based on an Arduino Uno
32 parts50 - 2 layers113.7 × 61 mm

ArduTester SMD
jonsag/arduTester
An arduino component tester based on https://create.arduino.cc/projecthub/plouc68000/ardutester-v1-13-the-arduino-uno-transistor-tester-dbafb4
17 parts14 - 4 layers65.9 × 52.9 mm

- 4 layers68.6 × 53.3 mm

101 PCB
ICRS/101
The all-new open source Robotics 101 course from ICRS. It's specifically designed to be run in hackspaces, after school clubs and university societies.
89 parts10CC-BY-4.0 - 2 layers53.3 × 68.3 mm

Questions
How big is the TestRig PCB?
It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TestRig use?
18 parts, built around the ARDUINO UNO R3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TestRig KiCad files?
From the RasmusB/USB-Keyboard-Adapter repository on GitHub, at the commit this page was made from: the board is TestRig/v1/TestRig.kicad_pcb and its schematic PCB/Keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TestRig design in my own project?
Its repository states no licence, so its author keeps all rights: ask RasmusB before reusing the design.