
Panel led
radioelf/ESP32-64X32-pcb
PCB para conectar un ESP32 (ESP32-DevKitC) a un panel de 64x32 pixels (p5(2121)-16S-6432-B0)

PCB para conectar un ESP32 (ESP32-DevKitC) a un panel de 64x32 pixels (p5(2121)-16S-6432-B0)
Panel led mod is an open-source printed circuit board by radioelf, from the radioelf/ESP32-64X32-pcb repository on GitHub. It is a 2-layer board of 71.6 × 59.7 mm with 13 parts on 28 nets, routed with 469 tracks and 39 vias.
It is built around the ESP32-WROOM-32D. Its parts include 3 connectors, 1 IC and 1 diode. It belongs with the ESP32 boards of this library.
PCB para conectar un ESP32 (ESP32-DevKitC) a un panel de 64x32 pixels (p5(2121)-16S-6432-B0), siguiendo el proyecto de domótica fácil con Jota
Creative Commons License Disclaimer
UNLESS OTHERWISE MUTUALLY AGREED TO BY THE PARTIES IN WRITING, LICENSOR OFFERS THE WORK AS-IS AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE WORK, EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTIBILITY, FITNESS FOR A PARTICULAR PURPOSE, NONINFRINGEMENT, OR THE ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OF ABSENCE OF ERRORS, WHETHER OR NOT DISCOVERABLE. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO SUCH EXCLUSION MAY NOT APPLY TO YOU. EXCEPT TO THE EXTENT REQUIRED BY APPLICABLE LAW, IN NO EVENT WILL LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES ARISING OUT OF THIS LICENSE OR THE USE OF THE WORK, EVEN IF LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | Jumper | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | 8, 10, 12, 14, 16 |
| 1 | 02x07 | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | J2 |
| 1 | 02x08 | Connector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Vertical | J1 |
| 1 | 1N5819 | Diode_SMD:D_SOD-123 | D1 |
| 1 | ESP32-WROOM-32D | librerias:MODULE_ESP32-DEVKITC-32D | U1 |
| 1 | Power 5V DC | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_2-G-3.5_1x02_P3.50mm_Vertical | J3 |
The 10 most common of 13 parts.

radioelf/ESP32-64X32-pcb
PCB para conectar un ESP32 (ESP32-DevKitC) a un panel de 64x32 pixels (p5(2121)-16S-6432-B0)

W0rthlessS0ul/nRF24_jammer
The nRF24 jammer is a powerful tool that requires an ESP32 and configurable numbers of NRF24 modules to assemble.


doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!


voltlog/Valve-Actuator
If you are looking for sources of previous revisions (revA, revB, revC) checkout the different branches of this repo.

Jutta-Proto/protocol-cpp
C++ JURA protocol implementation for controlling a Jura coffee maker over a serial (UART) connection.


It measures 71.6 × 59.7 mm and has 2 copper layers, 1.6 mm thick.
13 parts, built around the ESP32-WROOM-32D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the radioelf/ESP32-64X32-pcb repository on GitHub, at the commit this page was made from: the board is panel_led_mod.kicad_pcb and its schematic panel_led.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask radioelf before reusing the design.