

Battery board v2
PCBs for satellite
- Size
- 90.2 × 96 mm
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 129
- Nets
- 185
- Pads
- 704
- Tracks, vias
- 933, 113
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 5 Mar 2019
- Updated
- 11 Oct 2024
Overview
Battery board v2 is an open-source printed circuit board by queens-satellite-team, from the queens-satellite-team/pcbs repository on GitHub. It is a 4-layer board of 90.2 × 96 mm with 129 parts on 185 nets, routed with 933 tracks and 113 vias.
It is built around the STM32F030F4P6, BQ29723DSE and LTC6995HS6-1#TRMPBF, with the TPS63060DSC, 74AUP1G08GS and CSD16406Q3 among its other parts. Its parts include 35 resistors, 31 capacitors, 13 ICs, 11 transistors and 9 connectors. It belongs with the power boards and the STM32 boards of this library.
Main components
9STM32F030F4P6
TSSOP-20-40℃~+85℃ 12bit 15 16KB 2.4V~3.6V 32 Bit 48MHz 4KB ARM Cortex-M0 Built-in FLASH TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)BQ29723DSE
WSON-6(1.5x1.5)-300mV~8V -40℃~+85℃ 1 2.5V 4uA Lithium Battery Not supported Protection IC Support WSON-6(1.5x1.5) Battery Management ROHSTexas InstrumentsBattery ManagementLTC6995HS6-1#TRMPBF
TSOT-23-6-40℃~+125℃ 135uA 2.25V~5.5V 977Hz TSOT-23-6 Timers / Counters ROHSAnalog DevicesTimers / CountersTPS63060DSC
UncategorisedTexas Instruments74AUP1G08GS
XSON-6(1x1)-40℃~+125℃ 1 1.6V、2V 2 2.6V 440mV 4mA 4mA 6.2ns@3.6V,30pF 74AUP 800mV~3.6V 900mV 900nA AND Gate XSON-6(1x1) Logic Gates ROHSNexperiaLogic GatesCSD16406Q3
VSON-8(3.3x3.3)-55℃~+150℃ 1 N-channel 1.1nF 2.2V 25V 46W 7.4mΩ@4.5V 79A 8.1nC@4.5V 80pF 950pF N-Channel VSON-8(3.3x3.3) MOSFETs ROHSTexas InstrumentsMOSFETs1210L450/12SLWR
1210-40℃~+85℃ 12V 14mΩ 1mΩ 2s 4.5A 50A 9A 1210 Resettable Fuses ROHSLittelfuseResettable FusesCSD16401Q5
SON-8(5x6)-55℃~+150℃ 1 N-channel 1.8mΩ@4.5V 1.9V 156W 230pF 25V 261A 29nC@4.5V 3.3nF 4.1nF N-Channel SON-8(5x6) MOSFETs ROHSTexas InstrumentsMOSFETsNTJD1155LT1G
SC-88-55℃~+150℃ 1 N-Channel + 1 P-Channel 1.3A 1V 260mΩ@1.8V 400mW 8V N-Channel + P-Channel SC-88 MOSFETs ROHSonsemiMOSFETs
README
README.mdQSAT PCB Files
Overview
This README contains information on how to setup your KiCad 6.0 environment. It includes:
- How to use the existing schematic symbols and layout footprints
- How to start a new project from an existing template
- How to prepare the manufacturing and assembly files for ordering from JLCPCB
Using QSAT PCB Symbols and Footprints
Following the instructions provided here: How to Import into KiCad v6
Import Symbols
-
In KiCad, go to Preferences.
-
Click on Manage Symbol Libraries.
-
On the Global Libraries tab, click on Browse Libraries (the small folder icon below)
-
Select the .lib file, then click Open.
-
The library will appear, click OK.
-
Click on Symbol Editor.
-
Type on the filter search field, and navigate to the symbol you imported. Double-click over it to open the file.
Import Footprints
Using the *.kicad_mod file:
-
In KiCad, go to Preferences.
-
Click on Manage Footprint Libraries.
-
On the Global Libraries tab, click on Browse Libraries (the small folder icon below)
-
Navigate to the Folder of the downloaded .kicad_mod file. Then click Select Folder.
-
The library will appear, click OK.
-
Click on Footprint Editor.
-
Type on the filter search field, and navigate to the footprint you imported. Double-click over it to open the file.
Using QSAT PCB Templates
Following the instructions provided here: KiCad Creating Templates we must:
- Update our path configurations in KiCad to include the template folder.
a. Go to Preferences -> Configure Paths in the KiCad GUI.
b. Go to KICAD_USER_TEMPLATE_DIR and double click the path name until a folder apprears.
c. Navigate to the QSAT/pcbs/qsat-templates directory and hit Select Folder
- Create a new project from the template.
a. Go to File -> New Project From Template... in the KiCad GUI.
b. Select the User Templates tab, and choose the template you want.
Note: If starting a project from scratch it is recommended to use the QSAT - PC104 Base Board This is designed to have the same pcb footprint as the Clyde Space EPS board with mounting holes and a PC104 connector.
Ordering From JLCPCB
JLC has provided instructions for their required procedure, and is well detailed.
The steps to generate the manufacturing files are found here.
And the steps to generate the BOM and Centroid files are found here.
Parts
129| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | CSD16406Q3 | Package_TO_SOT_SMD:TDSON-8-1 | Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10 |
| 5 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C14, C16, C17, C18, C19 |
| 5 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C1, C10, C11, C20, C21 |
| 5 | 22 uF | Capacitor_SMD:C_0603_1608Metric | C26, C27, C28, C30, C31 |
| 5 | 22 uF | Capacitor_SMD:C_0402_1005Metric | C8, C12, C15, C23, C29 |
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R7, R9, R36 |
| 4 | 2.2k | Resistor_SMD:R_0603_1608Metric | R27, R28, R30, R31 |
| 4 | 330 | Resistor_SMD:R_0603_1608Metric | R25, R26, R32, R33 |
| 4 | BQ29723 | Package_SON:WSON-6_1.5x1.5mm_P0.5mm | U8, U9, U10, U11 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H5, H6, H7, H8 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_TopBottom | H1, H2, H3, H4 |
| 4 | NCR18650GA | qset-footprints:Keystone_54_18650 | B1, B2, B3, B4 |
| 2 | 1 M | Resistor_SMD:R_0603_1608Metric | R13, R24 |
| 2 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R8 |
| 2 | 100 | Resistor_SMD:R_0402_1005Metric | R1, R6 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric | C2, C4 |
| 2 | 10u | Capacitor_SMD:C_0402_1005Metric | C3, C5 |
| 2 | 1210L450/12SLWR | qset-footprints:1210L450-polyfuse | F1, F2 |
| 2 | 1M | Resistor_SMD:R_0402_1005Metric | R11, R14 |
| 2 | 2.2uH | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1, L2 |
| 2 | 681k | Resistor_SMD:R_0402_1005Metric | R15, R22 |
| 2 | CSD16401Q5 | Package_TO_SOT_SMD:TDSON-8-1 | Q1, Q2 |
| 2 | DNP | Resistor_SMD:R_0603_1608Metric | R34, R35 |
| 2 | LTC6995HS6-1#TRMPBF | qset-footprints:DFN-6_DCB_LIT | U4, U5 |
| 2 | TPS63060 | Package_SON:Texas_S-PWSON-N10_ThermalVias | U3, U7 |
| 1 | 0.1 | Resistor_SMD:R_0603_1608Metric | R29 |
| 1 | 0.1 uF | Capacitor_SMD:C_0603_1608Metric | C25 |
| 1 | 0.1 uF | Capacitor_SMD:C_0402_1005Metric | C13 |
| 1 | 1 M | Resistor_SMD:R_0402_1005Metric | R17 |
| 1 | 100R @ 100 MHz | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 100R @ 100MHz | Inductor_SMD:L_0402_1005Metric | FB2 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R21 |
| 1 | 100n | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 112k | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 16 MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R37 |
| 1 | 1nF | Capacitor_SMD:C_0402_1005Metric | C24 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 22n | Capacitor_SMD:C_0402_1005Metric | C22 |
| 1 | 238k | Resistor_SMD:R_0402_1005Metric | R23 |
| 1 | 280k | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 560k | Resistor_SMD:R_0402_1005Metric | R20 |
| 1 | 63.2k | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 74AUP1G08 | Package_TO_SOT_SMD:SOT-353_SC-70-5_Handsoldering | U6 |
| 1 | 920k | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | Conn_01x08_Male | qset-footprints:M80-5300842 | J4 |
| 1 | D1 Pull-Up | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP2 |
| 1 | Deployment Switch Bypass | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Horizontal | J6 |
| 1 | Deployment TP | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1 |
| 1 | Deployment Timer | Connector_PinHeader_2.00mm:PinHeader_1x03_P2.00mm_Horizontal | J9 |
| 1 | EN_D1 | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP6 |
| 1 | EN_D3 | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP3 |
| 1 | INA219AIDR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U12 |
| 1 | LOGO | qset-footprints:Logo-10mm | G*** |
| 1 | LOGO | LOGO | G*** |
| 1 | NTJD1155LT1G | qset-footprints:TRANS_NTJD1155LT1G | Q11 |
| 1 | PC104_Connector | pc104-template:pc104-connector | J1 |
| 1 | Power Control TP | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP2 |
| 1 | Programming Header | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical | J2 |
| 1 | RBF | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Horizontal | J5 |
| 1 | STM32F030F4P6 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | Shunt Resistor | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J8 |
| 1 | System Test Connector | Connector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_Vertical | J3 |
| 1 | TMP36 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | TPS24750 | qset-footprints:TPS24750 | U13 |
| 1 | Temp Sensor Disable | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP3 |
| 1 | Temp Sensor Enable | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP4 |
| 1 | Timer | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP4 |
| 1 | Watchdog Disable | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | Watchdog Timer | Connector_PinHeader_2.00mm:PinHeader_1x03_P2.00mm_Horizontal | J7 |
More from queens-satellite-team/pcbs
12- 4 layers95 × 95 mm

- 4 layers90.2 × 95.9 mm

- 2 layers139.1 × 55.1 mm

- 4 layers94 × 94 mm

- 4 layers90.2 × 95.9 mm

- 4 layers90.2 × 95.9 mm

- 4 layers90.2 × 95.9 mm

- 4 layers90.2 × 95.9 mm

- 2 layers83 × 113 mm

- 4 layers90.2 × 95.9 mm

- 4 layers45.1 × 43.2 mm

- 2 layers66.7 × 61 mm

Similar boards
- 2 layers

- 2 layers152.9 × 142.9 mm

- 6 layers71 × 126 mm

QuasarSDR
petrinm/QuasarSDR-Hardware
Hardware design files are disrtributed under CERN Open Hardware Licence Version 2 - Weakly Reciprocal licence.
454 parts7CERN-OHL-W-2.0 - 4 layers117 × 94 mm

Auriga backplane
hftsai256/auriga-backplane
Reverse-engineered backplane for Auriga enclosure to house 4x 2.5" Drives and 4x 3.5" Drives
30 parts1CC0-1.0 - 4 layers101.6 × 77.3 mm

Appletini board
jtflanagan/AppleTini
Teeny 4.1-based multifunctional Apple II peripheral card
38 parts17BSD-2-Clause - 6 layers100 × 100 mm

Imx8x carrier v2
BroncoSpace-Lab/scales-hardware
Hardware design files for the Spacecraft Compartmentalized Autonomous Learning and Edge Computing System (SCALES)
242 parts6 - 4 layers95.9 × 90.2 mm

KENSAT EPS v1.2
kenchangh/kensat
KENSAT, Edge-AI Compute in Orbit - A 2U CubeSat that runs a large language model on-orbit. A power-gated NVIDIA Jetson Orin Nano executes neural-network inference in space, and the results are downlinked over a custom…
218 parts119 - 4 layers150 × 100 mm

Interrupter v1.2
Alberto0235/DRSSTC-Fiber-Optic-Interrupter
Custom 4-layer interrupter control board for DRSSTC systems. STM32F405-based, fiber-optically isolated outputs, hardware E-brake safety chain, and controlled-impedance routing (90Ω USB, 50Ω FSMC/SDIO).
212 partsMIT
Questions
How big is the Battery board v2 PCB?
It measures 90.2 × 96 mm and has 4 copper layers, 4.69 mm thick.
What parts does the Battery board v2 use?
129 parts, built around the STM32F030F4P6, BQ29723DSE, LTC6995HS6-1#TRMPBF and TPS63060DSC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Battery board v2 KiCad files?
From the queens-satellite-team/pcbs repository on GitHub, at the commit this page was made from: the board is EPS_Boards/battery_board_v2/battery_board_v2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Battery board v2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask queens-satellite-team before reusing the design.