Skip to the content
1111111111

TPS63060DSC

Texas Instruments

Part id
ti/TPS63060DSC
Category
Uncategorised
Pins
41
Used on
33 open-source boards

Overview

The TPS63060DSC is an uncategorised made by Texas Instruments with 11 pins.

PCBKit's library has its KiCad symbol (Regulator_Switching:TPS63060, from KiCad's library) and its footprint (Package_SON:Texas_S-PWSON-N10, from KiCad's library), ready for a KiCad board. 33 open-source boards in 30 repositories on GitHub use it.

Symbol

1L12VIN3EN4PS/SYNC5PG6VAUX7GND8FB9VOUT10L211PGND
Regulator_Switching:TPS63060From KiCad's library

Footprint

1111111111
Package_SON:Texas_S-PWSON-N10From KiCad's library

Pinout

11
The pins of the TPS63060DSC
PinNameType
1L1Input
2VINPower in
3ENInput
4PS/SYNCInput
5PGOutput
6VAUXPassive
7GNDPower in
8FBInput
9VOUTPower out
10L2Input
11PGNDPower in

Open-source boards using it

33See all 33
  • 2 layers25.9 × 17 mmSnapVCC, the printed circuit board in 3D

    SnapVCC

    electronut/ElectronutLabs-snapVCC

    A tiny 3.3 V / 5 V voltage regulator that snaps right on top of a 9 volt battery.

    45 parts77
  • 2 layers65 × 95 mmCassetteCat RevA, the printed circuit board in 3D

    CassetteCat RevA

    samyyy2311/CassetteCat

    A music player for Android. Plays your own files, Jellyfin and Navidrome/Subsonic servers, and internet radio, with synced lyrics, an equalizer, Android Auto and a Listening Record. No account or tracking.

    52 parts23GPL-3.0
  • 2 layers65 × 120 mmNomad, the printed circuit board in 3D

    Nomad

    0Zane/Nomad

    One Adventure - One device,Nomad is a custom outdoor mobile device built around the ESP32-S3. It is designed for explorers, researchers, and outdoor enthusiasts who need reliable positioning, long-range communication…

    81 parts17MIT
  • 4 layers17.8 × 41.9 mmRP2040-ProMini, the printed circuit board in 3D

    RP2040-ProMini

    red-scorp/RP2040-ProMini

    RP2040-based board with footprint of Arduino ProMini

    44 parts8
  • 4 layers86.4 × 54.6 mmRoboCape, the printed circuit board in 3D

    RoboCape

    PREDICT-EPFL/RoboCape

    This repository is dedicated to a Beaglebone cape extension developped at EPFL in the Automatic Control Laboratory.

    114 parts4
  • 4 layers17.8 × 41.9 mmRP2350-ProMini, the printed circuit board in 3D

    RP2350-ProMini

    red-scorp/RP2350-ProMini

    RP2350-based board with footprint of Arduino ProMini

    46 parts4
  • 2 layers100 × 100 mmDemo, the printed circuit board in 3D

    Demo

    Sadteeto/BuhSat-v0

    buh

    32 parts4MIT
  • 4 layers27.9 × 63.9 mmTiny4FSKGeneralShield, the printed circuit board in 3D

    Tiny4FSKGeneralShield

    mpkendall/Tiny4FSK-Ecosystem

    Set of expansion boards, sensor breakouts, and additional modules to operate with the Tiny4FSK tracking system.

    35 parts3GPL-3.0

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the TPS63060DSC?

Yes. The symbol is Regulator_Switching:TPS63060 and the footprint Package_SON:Texas_S-PWSON-N10, both drawn on this page. PCBKit places them on a board for you when you design with it.

What can replace the TPS63060DSC?

Parts like it in the library: the TPS63061DSC by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS63060DSC?

33 boards in 30 repositories on GitHub; the most starred are listed on this page, with their KiCad files.