2 layers81 × 81 mm
TrackNodeAccel panel
Project-Touchscape/Touchscape-PCB
PCB designs for sensors, drivers, routing, and communication
375 parts
2 layers154 × 131.5 mm
Combined Stencil3
Project-Touchscape/Touchscape-PCBPCB designs for sensors, drivers, routing, and communication
- Size
- 154 × 131.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 346
- Nets
- 220
- Pads
- 1,529
- Tracks, vias
- 2,355, 305
- Pours
- 56
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 30 Jan 2025
- Updated
- 26 Sep 2026
Overview
Combined Stencil3 is an open-source printed circuit board by Project-Touchscape, from the Project-Touchscape/Touchscape-PCB repository on GitHub. It is a 2-layer board of 154 × 131.5 mm with 346 parts on 220 nets, routed with 2,355 tracks and 305 vias.
It is built around the ESP32-S3-WROOM-1-N4, AS5600-ASOT and DA2032-ALD, with the HV507PG-G, MIC5504-3.3YM5-TR and SN74LVC1G80DBVRE4 among its other parts. Its parts include 103 resistors, 93 capacitors, 39 ICs, 38 connectors and 10 diodes. It belongs with the ESP32 boards of this library.
Main components
11
ESP32-S3-WROOM-1-N4
SMD,25.5x18mm-103.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 On-board PCB Antenna UART、SPI、I2C、GPIO、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
AS5600-ASOT
SOIC-8-40℃~+125℃ 0°~360° 1.75mm 3.3V、5V 3.9mm 4.9mm 6.5mA I2C Magnetic rotary position sensor No SOIC-8 Position Sensors ROHSAdvanced Monolithic SystemsPosition SensorsDA2032-ALD
SMD-12SMD-12 Audio Transformers ROHSCoilcraftAudio Transformers
HV507PG-G
PQFP-80(14x20)0℃~+70℃ 1 1200mW 125ns@5V,20pF 1mA 4.5V~5.5V 64 8MHz Push-Pull Serial-to-Parallel PQFP-80(14x20) Shift Registers ROHSMicrochip TechnologyShift Registers
MIC5504-3.3YM5-TR
SOT-23-5-40℃~+125℃@(Tj) 1 160mV@(300mA) 175uVrms 3.3V 300mA 38uA 5.5V 60dB@(1kHz) Fixed Over Current Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSN74LVC1G80DBVRE4
SOT-23-5-40℃~+125℃ 1 1.3ns 1.65V~5.5V 10uA 160MHz 24mA 24mA 3.5pF 4.2ns@3.3V,15pF 74LVC 900ps D-Type Push-Pull Rising Edge SOT-23-5 Flip Flops ROHSTexas InstrumentsFlip Flops
SQJ476EP-T1_BE3
PowerPAKSO-8MOSFETsVishay Intertechnology
TXB0104PW
TSSOP-14-40℃~+85℃ 1 1.2V~3.6V 1.65V~5.5V 100Mbps 4 Auto Direction Detection Bidirectional CMOS CMOS Tri-State TSSOP-14 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
BAT60A
SOD-323Schottky DiodesSlkor
USB4105-GF-A
SMD-40℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
Parts
346| Qty | Value | Footprint | References |
|---|---|---|---|
| 66 | 10k | Resistor_SMD:R_0402_1005Metric | R101, R101, R102, R102, R103, R104, R104, R105, R106, R107, R107, R108, R110, R110, R111, R113 +50 |
| 50 | VAL** | Panelization:mouse-bite-2mm-slot | mouse-bite-2mm-slot, mouse-bite-2mm-slot, mouse-bite-2mm-slot, mouse-bite-2mm-slot1, mouse-bite-2mm-slot10, mouse-bite-2mm-slot11, mouse-bite-2mm-slot13, mouse-bite-2mm-slot14, mouse-bite-2mm-slot15, mouse-bite-2mm-slot16, mouse-bite-2mm-slot17, mouse-bite-2mm-slot18, mouse-bite-2mm-slot19, mouse-bite-2mm-slot20, mouse-bite-2mm-slot21, mouse-bite-2mm-slot23 +34 |
| 44 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C101, C102, C102, C102, C104, C106, C107, C108, C109, C110, C110, C111, C112, C113, C114, C116 +28 |
| 34 | 10u | Capacitor_SMD:C_0805_2012Metric | C101, C101, C103, C103, C104, C105, C107, C108, C109, C111, C112, C113, C115, C117, C119, C121 +18 |
| 28 | Conn_01x04 | Touchscape:CONN_CCSH-W10R-04TR-BK-A_ADA | J101, J101, J102, J103, J104, J104, J105, J106, J107, J107, J108, J109, J110, J111, J112, J113 +12 |
| 26 | AS5600-ASOT | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | IC101, IC101, IC102, IC103, IC104, IC105, IC106, IC107, IC108, IC109, IC110, IC111, IC112, IC113, IC114, IC115 +10 |
| 12 | 10 | Resistor_SMD:R_0402_1005Metric | R201, R202, R203, R204, R205, R206, R301, R302, R303, R304, R305, R306 |
| 8 | LED | LED_SMD:LED_0603_1608Metric | D101, D101, D102, D102, D103, D103, D201, D301 |
| 6 | 22n | Capacitor_SMD:C_0402_1005Metric | C203, C204, C205, C303, C304, C305 |
| 6 | 25m | Resistor_SMD:R_1206_3216Metric | R212, R213, R214, R312, R313, R314 |
| 6 | 500 | Resistor_SMD:R_0402_1005Metric | R105, R106, R108, R109, R211, R311 |
| 3 | 20p | Capacitor_SMD:C_0402_1005Metric | C105, C106, C304 |
| 2 | 0.01u | Capacitor_SMD:C_0402_1005Metric | C201, C301 |
| 2 | 0.47u | Capacitor_SMD:C_0402_1005Metric | C210, C310 |
| 2 | 22Ω | Resistor_SMD:R_0402_1005Metric | R104, R105 |
| 2 | 5.1kΩ | Resistor_SMD:R_0402_1005Metric | R102, R103 |
| 2 | Conn_01x02 | Touchscape:AMASS_XT30U-F_1x02_P5.0mm_Vertical | J102, J109 |
| 2 | Conn_01x03 | Connector_JST:JST_XH_S3B-XH-A-1_1x03_P2.50mm_Horizontal | J105, J108 |
| 2 | Conn_01x32 | Touchpoint:HRS_FH34SRJ-32S-0.5SH_50_ | J201, J202 |
| 2 | DRV8313RHHR | Touchscape:QFN50P600X600X100-37N-D | IC201, IC301 |
| 2 | INA4181A3IPWR | Touchscape:PW20_TEX | U201, U301 |
| 2 | SW_SPST | Touchscape:SW_B3U-1000P | SW101, SW102 |
| 2 | TestPoint | TestPoint:TestPoint_Keystone_5019_Miniature | TP101, TP302 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R302 |
| 1 | 13 | Resistor_SMD:R_0402_1005Metric | R305 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R101 |
| 1 | 2.49k | Resistor_SMD:R_0402_1005Metric | R306 |
| 1 | 300k | Resistor_SMD:R_0402_1005Metric | R308 |
| 1 | 30M | Resistor_SMD:R_0402_1005Metric | R307 |
| 1 | 4.7u | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C305 |
| 1 | 43k | Resistor_SMD:R_0402_1005Metric | R304 |
| 1 | 56u | Capacitor_SMD:C_Elec_6.3x5.8 | C303 |
| 1 | 60.4k | Resistor_SMD:R_0402_1005Metric | R303 |
| 1 | 750 | Resistor_SMD:R_0402_1005Metric | R101 |
| 1 | BAT60A | Diode_SMD:D_SOD-323 | D101 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Horizontal | J110 |
| 1 | Conn_01x07 | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Horizontal | J103 |
| 1 | Conn_01x10 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J101 |
| 1 | D | Touchpoint:SMB_DIO | D301 |
| 1 | DA2032-AL | Touchpoint:DA2032-AL | U302 |
| 1 | ESP32-S3-WROOM-1-N4 | Touchscape:ESP32S3WROOM1N4 | IC101 |
| 1 | HV507PG-G | Package_QFP:PQFP-80_14x20mm_P0.8mm | U202 |
| 1 | LT3750AEMS-TRPBF | Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm | U301 |
| 1 | MIC5504-3.3YM5-TR | Touchscape:SOT-23-5_MC_MCH | U102 |
| 1 | SN74LVC1G80DBVR | Touchscape:DBV5 | U103 |
| 1 | SQJ476EP-T1_BE3 | Touchscape:SO_J481EP-T1_BE3_VIS | U303 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP101 |
| 1 | TXB0104PW | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U201 |
| 1 | USB4105-GF-A | Touchscape:GCT_USB4105-GF-A | J101 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U101 |
The 338 most common of 346 parts.
Questions
How big is the Combined Stencil3 PCB?
It measures 154 × 131.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Combined Stencil3 use?
346 parts, built around the ESP32-S3-WROOM-1-N4, AS5600-ASOT, DA2032-ALD and HV507PG-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Combined Stencil3 KiCad files?
From the Project-Touchscape/Touchscape-PCB repository on GitHub, at the commit this page was made from: the board is Combined_Stencil3/Combined_Stencil3.kicad_pcb and its schematic AS5600_Mockup/AS5600_Mockup.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Combined Stencil3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Project-Touchscape before reusing the design.
More from Project-Touchscape/Touchscape-PCB
10- 2 layers68 × 80 mm
Microcoder panel
Project-Touchscape/Touchscape-PCB
PCB designs for sensors, drivers, routing, and communication
200 parts - 2 layers58 × 42 mm
Hydra Driver
Project-Touchscape/Touchscape-PCB
PCB designs for sensors, drivers, routing, and communication
99 parts - 2 layers55 × 55 mm
EEOP Testbed
Project-Touchscape/Touchscape-PCB
PCB designs for sensors, drivers, routing, and communication
33 parts - 2 layers48 × 16 mm
BusChain
Project-Touchscape/Touchscape-PCB
PCB designs for sensors, drivers, routing, and communication
25 parts - 2 layers15 × 15 mm
TrackNodeAccel
Project-Touchscape/Touchscape-PCB
PCB designs for sensors, drivers, routing, and communication
15 parts - 2 layers30 × 30 mm
Hydra Encoder
Project-Touchscape/Touchscape-PCB
PCB designs for sensors, drivers, routing, and communication
14 parts - 2 layers15 × 15 mm
TrackNode
Project-Touchscape/Touchscape-PCB
PCB designs for sensors, drivers, routing, and communication
10 parts - 2 layers52.8 × 29.5 mm
ESP32 Dock
Project-Touchscape/Touchscape-PCB
PCB designs for sensors, drivers, routing, and communication
7 parts - 2 layers12 × 12 mm
Microcoder
Project-Touchscape/Touchscape-PCB
PCB designs for sensors, drivers, routing, and communication
6 parts
Similar boards
- 2 layers138.8 × 96.4 mm
- 2 layers160 × 60 mm
- 4 layers217 × 139 mm
- 4 layers120 × 93 mm
- 2 layers100 × 100 mm
Main supply 3 revised
Thinkpad4by3/chibitron
Electrostatic CRT driver designed from the ground up for performance, versatility and ease-of-manufacturability
176 parts6 - 2 layers85 × 55 mm
Nixie clock
jason-watkins/nixie-clock
USB-C powered nixie tube clock. Four IN-12B digits, two INS-1 colon lamps, K155ID1 BCD decoder/drivers.
52 partsCC-BY-SA-4.0 - 4 layers39.7 × 37 mm
- 2 layers100 × 100 mm
Splitflap
besi/split-flap-clock
Split Flap clock or calendar utilising four 28BYJ-48 stepper motors.
91 parts1