Skip to the content
2 layers73.5 × 90 mmSide Unit, the printed circuit board in 3D

This is repository for Czech CanSat team Project SkyFall

Size
73.5 × 90 mm
Copper layers
2
Thickness
1.6 mm
Parts
75
Nets
69
Pads
218
Tracks, vias
411, 83
Pours
6
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
18 Dec 2022
Updated
7 Sep 2026

Overview

Side Unit is an open-source printed circuit board by Project-SkyFall, from the Project-SkyFall/CanSat-2023 repository on GitHub. It is a 2-layer board of 73.5 × 90 mm with 75 parts on 69 nets, routed with 411 tracks and 83 vias.

It is built around the AT25SF041B-SSHD-B and WS2812B. Its parts include 25 capacitors, 16 diodes, 8 resistors, 5 ICs and 3 connectors.

Main components

2

README

README.md

Disclaimer

This README isn't finished and will be edited in near future

CanSat-2023

This is a repository of the Czech CanSat team Project SkyFall, winner of CanSat's 2023 Czech national round

CanSat 2023

Documentation

About the team

Vít Brázda

Vít Brázda

Vít BrázdaVít is responsible for data visualization running on ground station, as well as making index of habitability of planet, where CanSat is landing. He has a lot of experience regarding Python.

David Haisman

David HaismanDavid handles electronics and programming on our CanSat. He designed PCB's, made some libraries and wrote the whole CanSat code. During the development of the CanSat he gained a lot of experience regarding PCB design and programming in C++.

Radim Leština

Radim LeštinaRadim is in charge of designing the outer construction of the CanSat itself. He has a lot of experience in designing and 3D printing mechanical contraptions.

Václav Horáček

Václav HoráčekVáclav is in charge of multiple departments, mainly the ones for documentation and recovery. In documentation he made the styles, graphics and oversees the documentation making process. His contribution in the recovery department is designing and sewing the CanSat's parachute.

Lukáš Nastoupil

Lukáš NastoupilLukáš designed and made the ground station, which is an essential part for our secondary mission. He designed the PCB's, modeled and programmed the ground station. He also worked on the real-time transmission of video from CanSat down to the ground station.

Adam Keřka

Adam KeřkaAdam leads the team itself and also the department of publicity. This mainly includes maintaining social networks accounts and communicating with sponsors. He also designed a lot of the graphics used in advertising and posts on social networks.

Vladimír Kašpar

Ing. Vladimír Kašpar is our mentor in the CanSat competition. We chose Vladimír Kašpar as our mentor based on his experience. In the CanSat 2019 he was a mentor of team Charles the fourth that made it to the European finale. He is also an electronics teacher at SPŠE a VOŠ Pardubice.

Jan Novotný

Jan Novotný is a freelance developer who makes web and mobile applications. He programmed the Project SkyFall webpage and supports our team on various other competitions and outgoings.

Parts

75
QtyValueFootprintReferences
210.1uF1Knihovna:C_0805_2012MetricC301, C303, C305, C401, C402, C501, C502, C503, C504, C505, C506, C507, C508, C601, C602, C603 +5
16WS2812BLED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mmD501, D502, D503, D504, D505, D506, D507, D508, D601, D602, D603, D604, D605, D606, D607, D608
810k1Knihovna:R_0805_2012MetricR201, R202, R301, R302, R303, R304, R305, R306
41uF1Knihovna:C_0805_2012MetricC302, C304, C306, C307
3G***kibuzzard-63C42A5Fkibuzzard-63C42A5F, kibuzzard-63C42A5F, kibuzzard-63C42A5F
3Land paternCanSat:Land-patternJ101, J102, J103
2G***kibuzzard-63C685D8kibuzzard-63C685D8, kibuzzard-63C685D8
2G***kibuzzard-63C685CCkibuzzard-63C685CC, kibuzzard-63C685CC
2G***kibuzzard-63C68642kibuzzard-63C68642, kibuzzard-63C68642
1AS72651Package_LGA:AMS_LGA-20_4.7x4.5mm_P0.65mmU301
1AS72652Package_LGA:AMS_LGA-20_4.7x4.5mm_P0.65mmU302
1AS72653Package_LGA:AMS_LGA-20_4.7x4.5mm_P0.65mmU303
1AT25SF041B-SSHD-B1Knihovna:SOIC-8_3.9x4.9mm_P1.27mmU304
1BH1730Package_WSOF:WSOF6U401
1G***kibuzzard-63C42B39kibuzzard-63C42B39
1G***kibuzzard-63C68658kibuzzard-63C68658
1G***kibuzzard-63C86FCEkibuzzard-63C86FCE
1G***kibuzzard-63C42A2Akibuzzard-63C42A2A
1G***kibuzzard-63C6862Fkibuzzard-63C6862F
1G***kibuzzard-63C42B4Akibuzzard-63C42B4A
1G***kibuzzard-63C86FC3kibuzzard-63C86FC3

The 73 most common of 75 parts.

More from Project-SkyFall/CanSat-2023

8
  • 4 layers60.7 × 61.3 mmPower Unit, the printed circuit board in 3D

    Power Unit

    Project-SkyFall/CanSat-2023

    This is repository for Czech CanSat team Project SkyFall

    162 parts6
  • 4 layers60.7 × 61.3 mmPower Unit 2, the printed circuit board in 3D

    Power Unit 2

    Project-SkyFall/CanSat-2023

    This is repository for Czech CanSat team Project SkyFall

    102 parts6
  • 4 layers80 × 80 mmControl Unit, the printed circuit board in 3D

    Control Unit

    Project-SkyFall/CanSat-2023

    This is repository for Czech CanSat team Project SkyFall

    97 parts6
  • 2 layers145 × 120 mmGround Station 2023, the printed circuit board in 3D

    Ground Station 2023

    Project-SkyFall/CanSat-2023

    This is repository for Czech CanSat team Project SkyFall

    49 parts6
  • 2 layers65 × 75 mmFake Can, the printed circuit board in 3D

    Fake Can

    Project-SkyFall/CanSat-2023

    This is repository for Czech CanSat team Project SkyFall

    5 parts6
  • 2 layers27 × 22 mmGstation LoRa, the printed circuit board in 3D

    Gstation LoRa

    Project-SkyFall/CanSat-2023

    This is repository for Czech CanSat team Project SkyFall

    4 parts6
  • 2 layers33.5 × 18.5 mmGstation stepdown, the printed circuit board in 3D

    Gstation stepdown

    Project-SkyFall/CanSat-2023

    This is repository for Czech CanSat team Project SkyFall

    3 parts6
  • 2 layersSide switch, the printed circuit board in 3D

    Side switch

    Project-SkyFall/CanSat-2023

    This is repository for Czech CanSat team Project SkyFall

    3 parts6

Similar boards

  • 4 layers90 × 90 mmZenith 3 Flight Computer, the printed circuit board in 3D

    Zenith 3 Flight Computer

    BarrettT123/CanSat-Team-Cosmos

    (The software I contributed to this project can be found in the CanSat-Team-Cosmos-Software repository)

    118 parts
  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 2 layers26 × 30 mmMicrocontroller, the printed circuit board in 3D

    Microcontroller

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    34 parts1.1kCC-BY-4.0
  • 4 layers82.6 × 82.5 mmJumperless2, the printed circuit board in 3D

    Jumperless2

    Architeuthis-Flux/Jumperless

    A jumperless breadboard

    208 parts914
  • 2 layers95.3 × 161.9 mmDfh badge, the printed circuit board in 3D

    Dfh badge

    tanaes/whopping_Voron_mods

    135 parts787GPL-3.0
  • 2 layers42.8 × 28.8 mmMM Skirt, the printed circuit board in 3D

    MM Skirt

    PrintersForAnts/Micron

    If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)

    11 parts741GPL-3.0
  • 2 layers149.6 × 127.1 mmErgodash, the printed circuit board in 3D

    Ergodash

    omkbd/ErgoDash

    keyboard

    187 parts732MIT
  • 2 layers285.5 × 95 mmReviung46 ver1 1, the printed circuit board in 3D

    Reviung46 ver1 1

    gtips/reviung

    The REVIUNG41 is 41-key column staggered keyboard.

    119 parts517MIT

Questions

How big is the Side Unit PCB?

It measures 73.5 × 90 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Side Unit use?

75 parts, built around the AT25SF041B-SSHD-B and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Side Unit KiCad files?

From the Project-SkyFall/CanSat-2023 repository on GitHub, at the commit this page was made from: the board is CanSat/PCB_design/Side_Unit/Side_Unit.kicad_pcb and its schematic CanSat/PCB_design/Control_Unit/Control_Unit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Side Unit design in my own project?

Its repository states no licence, so its author keeps all rights: ask Project-SkyFall before reusing the design.