Skip to the content
4 layers80 × 80 mmControl Unit, the printed circuit board in 3D

This is repository for Czech CanSat team Project SkyFall

Size
80 × 80 mm
Copper layers
4
Thickness
1.6 mm
Parts
97
Nets
96
Pads
361
Tracks, vias
658, 127
Pours
10
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
18 Dec 2022
Updated
7 Sep 2026

Overview

Control Unit is an open-source printed circuit board by Project-SkyFall, from the Project-SkyFall/CanSat-2023 repository on GitHub. It is a 4-layer board of 80 × 80 mm with 97 parts on 96 nets, routed with 658 tracks and 127 vias.

It is built around the BME280, DS18B20 and MAX1626ESA+T, with the ESP32-MINI-1, PT7C43390LE and RFM96W-433S2 among its other parts. Its parts include 29 resistors, 17 capacitors, 9 connectors, 8 transistors and 7 ICs. It belongs with the ESP32 boards of this library.

Main components

12

README

README.md

Disclaimer

This README isn't finished and will be edited in near future

CanSat-2023

This is a repository of the Czech CanSat team Project SkyFall, winner of CanSat's 2023 Czech national round

CanSat 2023

Documentation

About the team

Vít Brázda

Vít Brázda

Vít BrázdaVít is responsible for data visualization running on ground station, as well as making index of habitability of planet, where CanSat is landing. He has a lot of experience regarding Python.

David Haisman

David HaismanDavid handles electronics and programming on our CanSat. He designed PCB's, made some libraries and wrote the whole CanSat code. During the development of the CanSat he gained a lot of experience regarding PCB design and programming in C++.

Radim Leština

Radim LeštinaRadim is in charge of designing the outer construction of the CanSat itself. He has a lot of experience in designing and 3D printing mechanical contraptions.

Václav Horáček

Václav HoráčekVáclav is in charge of multiple departments, mainly the ones for documentation and recovery. In documentation he made the styles, graphics and oversees the documentation making process. His contribution in the recovery department is designing and sewing the CanSat's parachute.

Lukáš Nastoupil

Lukáš NastoupilLukáš designed and made the ground station, which is an essential part for our secondary mission. He designed the PCB's, modeled and programmed the ground station. He also worked on the real-time transmission of video from CanSat down to the ground station.

Adam Keřka

Adam KeřkaAdam leads the team itself and also the department of publicity. This mainly includes maintaining social networks accounts and communicating with sponsors. He also designed a lot of the graphics used in advertising and posts on social networks.

Vladimír Kašpar

Ing. Vladimír Kašpar is our mentor in the CanSat competition. We chose Vladimír Kašpar as our mentor based on his experience. In the CanSat 2019 he was a mentor of team Charles the fourth that made it to the European finale. He is also an electronics teacher at SPŠE a VOŠ Pardubice.

Jan Novotný

Jan Novotný is a freelance developer who makes web and mobile applications. He programmed the Project SkyFall webpage and supports our team on various other competitions and outgoings.

Parts

97
QtyValueFootprintReferences
80.1uFCanSat_2023:C_0805_2012MetricC204, C205, C207, C301, C302, C303, C504, C601
810kCanSat_2023:R_0805_2012MetricR204, R205, R206, R210, R211, R223, R224, R226
4100kCanSat_2023:R_0805_2012MetricR203, R209, R214, R221
4BC847CanSat_2023:SOT-23Q202, Q204, Q205, Q206
4G***CanSat_2023:kibuzzard-63BEB0CFkibuzzard-63BEB0CF, kibuzzard-63BEB0CF, kibuzzard-63BEB0CF, kibuzzard-63BEB0CF
4MountingHoleCanSat_2023:MountingHole_3.2mm_M3H201, H202, H203, H204
4SI2305CDS-T1-BE3CanSat_2023:SOT-23Q201, Q203, Q207, Q501
3009155004541006CanSat_2023:009155004541006J105, J106, J107
35kCanSat_2023:R_0805_2012MetricR220, R222, R225
35k1CanSat_2023:R_0805_2012MetricR217, R218, R219
3Conn_02x02_MaleCanSat_2023:PinHeader_2x02_P2.54mm_VerticalJ102, J103, J104
20RCanSat_2023:R_1206_3216MetricR213, R502
210uFCanSat_2023:C_0805_2012MetricC201, C206
21uFCanSat_2023:C_0805_2012MetricC202, C208
2750RCanSat_2023:R_0805_2012MetricR215, R216
2APT2012LSECK/J4-PRVCanSat_2023:LED_0805_2012MetricD202, D203
2LaskaKit tlačítkoCanSat_2023:Tlačítko SMD LaskaKitSW202, SW203
2TPSB686K010R0600CanSat_2023:CP_EIA-3528-21_Kemet-BC501, C502
10.47uFCanSat_2023:C_0805_2012MetricC503
11kCanSat_2023:R_0805_2012MetricR201
122k1CanSat_2023:R_0805_2012MetricR202
127kCanSat_2023:R_0805_2012MetricR208
1293D227X9010D2TE3CanSat_2023:CP_EIA-7343-31_Kemet-DC505
147kCanSat_2023:R_0805_2012MetricR212
147k5CanSat_2023:R_0805_2012MetricR207
14k7CanSat_2023:R_0805_2012MetricR301
1680uFCanSat_2023:CP_Elec_6.3x7.7C203
1Antenna_ShieldCanSat_2023:U.FL_Hirose_U.FL-R-SMT-1_VerticalAE401
1B330ACanSat_2023:D_SMAD501
1BME280CanSat_2023:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumberingU302
1Backup batteryCanSat_2023:2989BT701
1CDRH125NP-220MCCanSat_2023:CDRH125101MCL501
1CP2102N-Axx-xQFN24CanSat_2023:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mmU201
1Conn_02x04_MaleCanSat_2023:PinHeader_2x04_P2.54mm_VerticalJ101
1DS04-254-1-03BK-SMTCanSat_2023:SW_DIP_SPSTx03_Slide_Omron_A6S-310x_W8.9mm_P2.54mmSW201
1DS18B20CanSat_2023:TO-92_InlineU301
1ECS-.327-6-34B-C-TRCanSat_2023:ECX-31BY701
1ESP32-MINI-1CanSat_2023:ESP32-MINI-1U202
1G***CanSat_2023:kibuzzard-63BEB9E1kibuzzard-63BEB9E1
1G***kibuzzard-644421CDkibuzzard-644421CD
1G***kibuzzard-644422F5kibuzzard-644422F5
1G***kibuzzard-644421E6kibuzzard-644421E6
1G***kibuzzard-644421C3kibuzzard-644421C3
1MAX1626ESA+TCanSat_2023:SOIC127P600X175-8NU501
1Micro_SD_Card 823-046CanSat_2023:DS1139-05J601
1PE1206FRE470R04LCanSat_2023:R_1206_CurrentR501
1PT7C4339CanSat_2023:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mmU701
1RFM96W-433S2CanSat_2023:HOPERF_RFM9XW_SMDU401
1SBR3U40S1F-7CanSat_2023:D_SOD-123FD201
1SP0503BAHTCanSat_2023:SOT-143D204
1USB4110-GF-ACanSat_2023:USB4110GFAJ201

The 95 most common of 97 parts.

More from Project-SkyFall/CanSat-2023

8
  • 4 layers60.7 × 61.3 mmPower Unit, the printed circuit board in 3D

    Power Unit

    Project-SkyFall/CanSat-2023

    This is repository for Czech CanSat team Project SkyFall

    162 parts6
  • 4 layers60.7 × 61.3 mmPower Unit 2, the printed circuit board in 3D

    Power Unit 2

    Project-SkyFall/CanSat-2023

    This is repository for Czech CanSat team Project SkyFall

    102 parts6
  • 2 layers73.5 × 90 mmSide Unit, the printed circuit board in 3D

    Side Unit

    Project-SkyFall/CanSat-2023

    This is repository for Czech CanSat team Project SkyFall

    75 parts6
  • 2 layers145 × 120 mmGround Station 2023, the printed circuit board in 3D

    Ground Station 2023

    Project-SkyFall/CanSat-2023

    This is repository for Czech CanSat team Project SkyFall

    49 parts6
  • 2 layers65 × 75 mmFake Can, the printed circuit board in 3D

    Fake Can

    Project-SkyFall/CanSat-2023

    This is repository for Czech CanSat team Project SkyFall

    5 parts6
  • 2 layers27 × 22 mmGstation LoRa, the printed circuit board in 3D

    Gstation LoRa

    Project-SkyFall/CanSat-2023

    This is repository for Czech CanSat team Project SkyFall

    4 parts6
  • 2 layers33.5 × 18.5 mmGstation stepdown, the printed circuit board in 3D

    Gstation stepdown

    Project-SkyFall/CanSat-2023

    This is repository for Czech CanSat team Project SkyFall

    3 parts6
  • 2 layersSide switch, the printed circuit board in 3D

    Side switch

    Project-SkyFall/CanSat-2023

    This is repository for Czech CanSat team Project SkyFall

    3 parts6

Similar boards

  • 12 layers230 × 225 mmFast open switch r1.0, the printed circuit board in 3D

    Fast open switch r1.0

    PCB-Arts/fast-open-switch-hardware

    KlusterLab is an open FPGA development platform designed for experimenting with high-speed interfaces and formally verified IP cores.

    909 parts15
  • 4 layers222 × 100 mmHydroScan V1, the printed circuit board in 3D

    HydroScan V1

    paulmartinezcuenta/Proyecto_finales_mecatronica_ITLA

    Monorepo for two mechatronics projects sharing a panelized PCB: HydroScan (autonomous IoT maritime buoy with LTE, GPS, and solar power) and AUTOAMBU (automated medical respirator prototype with DC control and USB fast…

    156 parts1
  • 4 layers110 × 90 mmPLC V1, the printed circuit board in 3D

    PLC V1

    paulmartinezcuenta/UltiCore-V1-PLC

    Custom industrial-grade PLC and logic controller engineered around the ESP32 platform.

    202 parts1MIT
  • 4 layers92 × 60 mmLoconetEsp32, the printed circuit board in 3D

    LoconetEsp32

    DccDiyTools/LoconetEsp32

    Esp32 Loconet Interface

    82 partsGPL-3.0
  • 2 layersPLC V1, the printed circuit board in 3D

    PLC V1

    JosueHerrera05/Josue_Herrera_Electiva_2026_C2

    Repositorio Electíva Diseño Mecatrónico 2026-C2

    59 partsMIT
  • 4 layers66 × 42 mmCommBoard, the printed circuit board in 3D

    CommBoard

    icl-rocketry/Ricardo-RadioBoard

    93 parts
  • 2 layers56.5 × 65 mmLoRaAPRS GW RPI V20, the printed circuit board in 3D

    LoRaAPRS GW RPI V20

    aronaut/LoRa-APRS-Gateway-HAT-for-Raspberry-Pi

    LoRa APRS Gateway HAT for Raspberry Pi

    28 parts4GPL-3.0
  • 4 layers60 × 60 mmRocket payload, the printed circuit board in 3D

    Rocket payload

    Gupatron/Gupsfirstpcb

    This is the first pcb that I will manufacture and intend to use for teleop usecases in my personal projects.

    138 parts

Questions

How big is the Control Unit PCB?

It measures 80 × 80 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Control Unit use?

97 parts, built around the BME280, DS18B20, MAX1626ESA+T and ESP32-MINI-1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Control Unit KiCad files?

From the Project-SkyFall/CanSat-2023 repository on GitHub, at the commit this page was made from: the board is CanSat/PCB_design/Control_Unit/Control_Unit.kicad_pcb and its schematic CanSat/PCB_design/Control_Unit/Control_Unit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Control Unit design in my own project?

Its repository states no licence, so its author keeps all rights: ask Project-SkyFall before reusing the design.