4 layers60 × 60 mm
Rocket payload
Gupatron/Gupsfirstpcb
This is the first pcb that I will manufacture and intend to use for teleop usecases in my personal projects.
138 parts
2 layers56.5 × 65 mm
LoRaAPRS GW RPI V20
aronaut/LoRa-APRS-Gateway-HAT-for-Raspberry-Pi4LoRa APRS Gateway HAT for Raspberry Pi
- Size
- 56.5 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 18
- Pads
- 119
- Tracks, vias
- 173, 12
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 26 Apr 2020
- Updated
- 13 Feb 2021
Overview
LoRaAPRS GW RPI V20 is an open-source printed circuit board by aronaut, from the aronaut/LoRa-APRS-Gateway-HAT-for-Raspberry-Pi repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 56.5 × 65 mm with 28 parts on 18 nets, routed with 173 tracks and 12 vias.
It is built around the BME280 and RFM96W-433S2. Its parts include 7 resistors, 5 switches, 3 connectors, 1 capacitor and 1 IC. It belongs with the radio and wireless boards of this library.
Main components
2README
README.mdWhat is it?
With this LoRa APRS board you can build a LoRa APRS single channel Gateway.
The Board is based on the development of https://www.lora-aprs.at/ and http://www.iot4pi.com/
It works with a Raspberry Pi (2 Model B, 3 Model B an B+, Zero WH).
Power is provided by Raspberry Pi.
What you find here
- KiCad Fils
- Gerber Files
- Manuals
- Pictures of the LoRa-APRS-Board
Info & Software
You find information and Software for the LoRa-APRS Gateway at
https://www.aronaut.at/2019/11/lora-aprs-gateway-fur-raspberry-pi/
https://www.lora-aprs.at/
http://www.iot4pi.com/de/hardware/lora-gateway/
https://github.com/tomelec/RPi-LoRa-KISS-TNC
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 47k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5 |
| 5 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1, SW2, SW3, SW4, SW5 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6, R7 |
| 2 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2 |
| 1 | Antenna_Shield | Connector_Coaxial:SMA_Amphenol_901-144_Vertical | AE1 |
| 1 | BME280 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | C | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | Display | ARO_Footprints:OLED_0,96_II | J2 |
| 1 | LOGO | Logos:LoRa_Logo | G*** |
| 1 | RFM96W-433S2 | RF_Module:HOPERF_RFM9XW_SMD | U1 |
| 1 | Raspberry PI Header | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
The 21 most common of 28 parts.
Similar boards
- 4 layers80 × 80 mm
Control Unit
Project-SkyFall/CanSat-2023
This is repository for Czech CanSat team Project SkyFall
97 parts6 - 4 layers60 × 100 mm
- 2 layers51.1 × 95 mm
Talk e
milovanpms/talk-e
📻 — A simple LoRa-based talkie-walkie built on ESP32, operating on the 433 MHz frequency band for long-range, low-power wireless communication.
75 parts4 - 2 layers51.8 × 41.7 mm
PayloadPrototypeBoard
Case-Rocket-Team/PayloadPrototypeBoard2021
Prototype Payload Board for the 2021 ESRA Payload using Parafoil Guidance. KiCad Project
84 parts2 - 4 layers85 × 100 mm
Narwal v1
rice-eclipse/rf-communications
This is the work completed by Rice Eclipse's RF Communications team.
47 parts2 - 2 layers38.1 × 101.6 mm
- 2 layers64 × 100 mm
Questions
How big is the LoRaAPRS GW RPI V20 PCB?
It measures 56.5 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LoRaAPRS GW RPI V20 use?
28 parts, built around the BME280 and RFM96W-433S2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LoRaAPRS GW RPI V20 KiCad files?
From the aronaut/LoRa-APRS-Gateway-HAT-for-Raspberry-Pi repository on GitHub, at the commit this page was made from: the board is KiCad/LoRaAPRS-GW-RPI_V20.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LoRaAPRS GW RPI V20 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).