Skip to the content

RFM96W-433S2

HOPE MICROELECTRONICSExtended

LCC-16_16X16mm New Arrivals ROHS

Part id
hope-microelectronics/RFM96W-433S2
Category
Uncategorised
Package
LCC-16_16X16mm
Pins
16
In stock
0 at JLCPCB (C20417388)
Used on
22 open-source boards

Overview

The RFM96W-433S2 is an uncategorised made by HOPE MICROELECTRONICS in a LCC-16_16X16mm package with 16 pins. LCC-16_16X16mm New Arrivals ROHS.

PCBKit's library has its KiCad symbol (RF_Module:RFM96W-433S2, from KiCad's library) and its footprint (Horizon_manufacturer:RFM9x, from Horizon), ready for a KiCad board. JLCPCB lists it (part C20417388). 22 open-source boards in 20 repositories on GitHub use it.

Symbol

1GND2MISO3MOSI4SCK5NSS6RESET7DIO58GND9ANT10GND11DIO312DIO4133.3V14DIO015DIO116DIO2
RF_Module:RFM96W-433S2From KiCad's library

Footprint

Horizon_manufacturer:RFM9xFrom Horizon

Pinout

16
The pins of the RFM96W-433S2
PinNameType
1GNDPower in
2MISOOutput
3MOSIInput
4SCKInput
5NSSInput
6RESETInput/output
7DIO5Input/output
8GNDPower in
9ANTInput/output
10GNDPower in
11DIO3Input/output
12DIO4Input/output
133.3VPower in
14DIO0Input/output
15DIO1Input/output
16DIO2Input/output

Open-source boards using it

22See all 22
  • 4 layers60 × 100 mmMIDAS MK1, the printed circuit board in 3D

    MIDAS MK1

    ISSUIUC/ISS-PCB

    Building custom flight computers

    221 parts33
  • 2 layers56.5 × 65 mmLoRaAPRS GW RPI V20, the printed circuit board in 3D

    LoRaAPRS GW RPI V20

    aronaut/LoRa-APRS-Gateway-HAT-for-Raspberry-Pi

    LoRa APRS Gateway HAT for Raspberry Pi

    28 parts4GPL-3.0
  • 2 layers51.1 × 95 mmTalk e, the printed circuit board in 3D

    Talk e

    milovanpms/talk-e

    📻 — A simple LoRa-based talkie-walkie built on ESP32, operating on the 433 MHz frequency band for long-range, low-power wireless communication.

    75 parts4
  • 2 layers51.8 × 41.7 mmPayloadPrototypeBoard, the printed circuit board in 3D

    PayloadPrototypeBoard

    Case-Rocket-Team/PayloadPrototypeBoard2021

    Prototype Payload Board for the 2021 ESRA Payload using Parafoil Guidance. KiCad Project

    84 parts2
  • 4 layers85 × 100 mmNarwal v1, the printed circuit board in 3D

    Narwal v1

    rice-eclipse/rf-communications

    This is the work completed by Rice Eclipse's RF Communications team.

    47 parts2
  • 2 layers38.1 × 101.6 mmTVC, the printed circuit board in 3D

    TVC

    awetzelkern/TVC-PCB

    45 parts
  • 2 layers43 × 43 mmLoramail, the printed circuit board in 3D

    Loramail

    Duckle29/loramail

    An over-engineered solution to check if "you got mail"

    31 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the RFM96W-433S2?

Yes. The symbol is RF_Module:RFM96W-433S2 and the footprint Horizon_manufacturer:RFM9x, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the RFM96W-433S2?

LCC-16_16X16mm, with 16 pins. Its footprint is drawn on this page.

Where can I order the RFM96W-433S2?

JLCPCB lists it as part C20417388, with 0 in stock; the sellers' links on this page open their listings.

What can replace the RFM96W-433S2?

Parts like it in the library: the RFM95W-915S2 by HopeRF Micro-electronics, the RFM98W-433S2 by HopeRF Micro-electronics, the RFM95W-868S2R by HOPE MICROELECTRONICS and the RFM95W-915S2 by HOPERF. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the RFM96W-433S2?

22 boards in 20 repositories on GitHub; the most starred are listed on this page, with their KiCad files.