2 layers80 × 74 mm
Hubble metal detector
zartarn15/hubble-metal-detector
STM32-based digital metal detector with custom hardware and embedded DSP firmware.
156 parts2
2 layers40 × 50 mm
ProgArm
ProgArm/ProgArm-Hardware3This repository contains only schematic and PCB files. Schematic PDF and Gerber files are attached to every release.
- Size
- 40 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 131
- Nets
- 101
- Pads
- 513
- Tracks, vias
- 1,759, 131
- Pours
- 41
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 3 Jun 2014
- Updated
- 23 Feb 2015
Overview
ProgArm is an open-source printed circuit board by ProgArm, from the ProgArm/ProgArm-Hardware repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 40 × 50 mm with 131 parts on 101 nets, routed with 1,759 tracks and 131 vias.
It is built around the STM32F103RBT6 and LPS25HB. Its parts include 40 resistors, 37 capacitors, 17 connectors, 9 ICs and 8 transistors. It belongs with the STM32 boards of this library.
Main components
2
STM32F103RBT6
LQFP-64(10x10)-40℃~+85℃ 128KB 12bit 20KB 2V~3.6V 32 Bit 51 72MHz ARM Cortex-M3 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
LPS25HB
HLGA-10(2.5x2.5)-30℃~+105℃ 0.1hpa 0.2hpa 1.7V~3.6V 26Kpa~1.26bar I2C、SPI No HLGA-10(2.5x2.5) Pressure Sensors ROHSSTMicroelectronicsPressure Sensors
README
README.mdProgArm-Hardware
This repository contains only schematic and PCB files. Schematic PDF and Gerber files are attached to every release.
You can find other files used in ProgArm project in other repositories.
Contributing
If you have found a bug, please consider creating an issue. If you have a question, please ask it on our website.
Please set up these filters before commiting to this repository:
git config --global filter.cleansch.clean "sed 's/^Date.*$/Date \"\"/'"
git config --global filter.cleanlib.clean "sed 's/^\(EESchema-LIBRARY Version [^ \\t]*\).*$/\1/'"
git config --global filter.cleanpcb.clean "sed 's/\(host pcbnew \"\)[^\"]*/\1/'"
git config --global filter.cleanpro.clean "sed 's/^\(update=\).*$/\1/'"License
According to Free Software Foundation, GPL license can be applied to anything as long as we can clearly define 'source code'. In this repository all Kicad files are considered as source code files (*.sch *.kicad_pcb *.lib *.mod and several others). You must provide these files (or their modifications) if you are distributing any work based on this project. Please refer to LICENSE file for details.
ProgArm is free hardware & software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.Parts
131| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 10k | SM0402_r | R1, R7, R11, R12, R15, R16, R22, R23, R24, R25, R31, R33, R34, R35, R36, R37 +1 |
| 12 | 100nF | SM0402_c | C1, C9, C18, C19, C21, C22, C23, C24, C25, C26, C30, C36 |
| 8 | MOS_P | SOT-723 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 6 | 300R | SM0402_r | R14, R18, R19, R20, R21, R29 |
| 5 | 100k | SM0402_r | R10, R13, R28, R30, R38 |
| 4 | 10uF | SM0603_Capa | C3, C8, C16, C17 |
| 3 | 1uF | SM0402_c | C2, C5, C32 |
| 3 | 22uF | SM0603_Capa | C14, C27, C29 |
| 3 | 4.7k | SM0402_r | R3, R5, R17 |
| 3 | 4.7uF | SM0402_c | C4, C15, C28 |
| 3 | LED | Led_0603 | D1, D2, D3 |
| 2 | 12pF | SM0402_c | C34, C35 |
| 2 | 18pF | SM0402_c | C11, C12 |
| 2 | 2.2uH | LQH43PB2R2M26 | L1, L2 |
| 2 | 27R | SM0402_r | R39, R40 |
| 2 | 6pF | SM0402_c | C6, C10 |
| 1 | 0.03F | PAS311HR-VA6R | C7 |
| 1 | 100R | SM0402_r | R8 |
| 1 | 10uH | SM0603 | L3 |
| 1 | 15nH | SM0402 | L4 |
| 1 | 16MHz | crystal_16MHz_SMD | X3 |
| 1 | 2.2nF | SM0402_c | C37 |
| 1 | 22k | SM0402_r | R32 |
| 1 | 240R | SM0402_r | R2 |
| 1 | 3.7V Li-ion | PIN_HEADER_1.27_2 | BT1 |
| 1 | 30R | SM0805 | R27 |
| 1 | 32.768kHz | crystal_32.768kHz_SMD | X1 |
| 1 | 33k | SM0402_r | R4 |
| 1 | 33nF | SM0402_c | C31 |
| 1 | 470nF | SM0402_c | C20 |
| 1 | 47nF | SM0402_c | C13 |
| 1 | 47uF | c_tant_A | C33 |
| 1 | 8001_BALUN | 2450BM14A0002T | B1 |
| 1 | 8MHz | crystal_smd_5x3.2mm | X2 |
| 1 | ANT | 2450AT43F0100E | A1 |
| 1 | BQ24297 | QFN24 | U2 |
| 1 | BQ27410 | bq27410-g1 | U6 |
| 1 | DIODE | sod523 | D4 |
| 1 | FW/RST | smd_microswitch | SW1 |
| 1 | Ferrite_Bead | SM0805 | L5 |
| 1 | GPIOA_1_2_Port | PIN_HEADER_1.27_2 | P5 |
| 1 | I²C_Port | PIN_HEADER_1.27_4 | P1 |
| 1 | JUMPER | solder_jumper | JP1 |
| 1 | LM3668 | LM3668 | U3 |
| 1 | LPS25H | LPS25H | U8 |
| 1 | MOTOR | vibramotor | M1 |
| 1 | MPU9250 | MPU9250 | U5 |
| 1 | MicroUSB | microusb-hw-mc-5f-02 | P17 |
| 1 | NRF8001 | QFN32 | U9 |
| 1 | ON/OFF | msk1103 | SW2 |
| 1 | R | SM0402_r | R6 |
| 1 | R | SM0805 | R26 |
| 1 | REF | progarm_logo | VAL |
| 1 | RING_BUTTONS_Port | PIN_HEADER_1.27_2 | P16 |
| 1 | RING_GND | PIN_HEADER_1.27_1 | P12 |
| 1 | RING_GPIOA_3_Port | PIN_HEADER_1.27_1 | P13 |
| 1 | RING_GPIOA_4_Port | PIN_HEADER_1.27_1 | P14 |
| 1 | RING_IR_OUT | PIN_HEADER_1.27_1 | P8 |
| 1 | RING_LEDS_Port | PIN_HEADER_1.27_3 | P9 |
| 1 | RING_VCC | PIN_HEADER_1.27_1 | P11 |
| 1 | RXD | 1PIN_SMD | P15 |
| 1 | SI1143 | QFN-10 | U7 |
| 1 | SPI_Port | PIN_HEADER_1.27_6 | P2 |
| 1 | STM32F103R | lqfp64 | U4 |
| 1 | SWD_Port | PIN_HEADER_1.27_4 | P4 |
| 1 | TIM1_Port | PIN_HEADER_1.27_1 | P6 |
| 1 | TPS78330 | SOT23-5 | U1 |
| 1 | TXD | 1PIN_SMD | P10 |
| 1 | T_SENS | PIN_HEADER_1.27_1 | P7 |
| 1 | UART_Port | PIN_HEADER_1.27_4 | P3 |
Questions
How big is the ProgArm PCB?
It measures 40 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ProgArm use?
131 parts, built around the STM32F103RBT6 and LPS25HB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ProgArm KiCad files?
From the ProgArm/ProgArm-Hardware repository on GitHub, at the commit this page was made from: the board is ProgArm.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ProgArm design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers79.7 × 80 mm
Mainboardv1.2
doobedoobedo/Huebner_Inverter
KiCAD port of https://github.com/jsphuebner/inverter-hardware mainboard V1.2
133 parts1 - 4 layers86 × 59 mm
- 4 layers100 × 50 mm
- 4 layers
- 2 layers
- 4 layers70 × 70 mm
- 4 layers76.4 × 74.9 mm
