2 layers15 × 15 mm
4 layers86 × 59 mm
Programmer routed1
afbravo/ic_programmer32 pin ic programmer
- Size
- 86 × 59 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 95
- Pads
- 344
- Tracks, vias
- 734, 100
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 28 Sep 2023
- Updated
- 28 Sep 2023
Overview
Programmer routed1 is an open-source printed circuit board by afbravo, from the afbravo/ic_programmer repository on GitHub. It is a 4-layer board of 86 × 59 mm with 53 parts on 95 nets, routed with 734 tracks and 100 vias.
It is built around the STM32F103RBT6, TXS0108EPW and TPMIC5504-3.3YM5. Its parts include 21 capacitors, 10 resistors, 6 ICs, 5 diodes and 3 connectors. It belongs with the interfaces and adapters boards and the STM32 boards of this library.
Main components
3
STM32F103RBT6
LQFP-64(10x10)-40℃~+85℃ 128KB 12bit 20KB 2V~3.6V 32 Bit 51 72MHz ARM Cortex-M3 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
TXS0108EPW
TSSOP-20-40℃~+85℃ 1 1.4V~3.6V 1.65V~5.5V 60Mbps 8 Automatic direction detection、Output enable high-impedance、Integrated pull-up resistor Bidirectional Level translator Push-Pull、Open-drain TSSOP-20 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
TPMIC5504-3.3YM5
SOT-23-5-40℃~+125℃@(Tj) 1 15uA 220mV@(300mA) 3.3V 300mA 5.5V 80dB@(100Hz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100nF | Capacitor_SMD:C_0402_1005Metric | C6, C7, C8, C9, C10, C11, C12, C14, C15, C16, C17, C18, C19, C20, C21 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R4, R5, R6, R9, R10 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C4, C5, C13 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 4 | TXS0108EPW | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U3, U4, U5, U6 |
| 3 | 100 | Resistor_SMD:R_0402_1005Metric | R3, R7, R8 |
| 2 | 220 | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 30p | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 1 | 8MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | BLUE | LED_SMD:LED_0805_2012Metric | D5 |
| 1 | Boot0 | LibraryAndres:SW_SWDT_SMD_0.8x1.4_0.8x2 | SW1 |
| 1 | Boot1 | LibraryAndres:SW_SWDT_SMD_0.8x1.4_0.8x2 | SW3 |
| 1 | GREEN | LED_SMD:LED_0805_2012Metric | D4 |
| 1 | RED | LED_SMD:LED_0805_2012Metric | D3 |
| 1 | Reset | LibraryAndres:SW_SMD_1.8x1.35_4.15 | SW2 |
| 1 | STM32F103RBT6 | Package_QFP:LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | SWJ-DP | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J1 |
| 1 | TPMIC5504-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_XKB_U254-051T-4BH83-F1S | J2 |
| 1 | WHITE | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | YELLOW | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | ZIF 32 DIP Socket | Socket:DIP_Socket-32_W11.9_W12.7_W15.24_W17.78_W18.5_3M_232-1285-00-0602J | J3 |
Questions
How big is the Programmer routed1 PCB?
It measures 86 × 59 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Programmer routed1 use?
53 parts, built around the STM32F103RBT6, TXS0108EPW and TPMIC5504-3.3YM5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Programmer routed1 KiCad files?
From the afbravo/ic_programmer repository on GitHub, at the commit this page was made from: the board is programmer/programmer_routed1.kicad_pcb and its schematic programmer/programmer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Programmer routed1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask afbravo before reusing the design.
Similar boards
- 2 layers40 × 50 mm
ProgArm
ProgArm/ProgArm-Hardware
This repository contains only schematic and PCB files. Schematic PDF and Gerber files are attached to every release.
131 parts3GPL-3.0 - 2 layers80 × 74 mm
Hubble metal detector
zartarn15/hubble-metal-detector
STM32-based digital metal detector with custom hardware and embedded DSP firmware.
156 parts2 - 2 layers79.7 × 80 mm
Mainboardv1.2
doobedoobedo/Huebner_Inverter
KiCAD port of https://github.com/jsphuebner/inverter-hardware mainboard V1.2
133 parts1 - 4 layers100 × 50 mm
- 4 layers
- 2 layers
- 4 layers70 × 70 mm
