
Mcu integration
kaitallaoua/capstone-pcb
In collaboration with the University of Saskatchewan, we are contributing a payload board for the CubeSats Initiative in Canada for STEM (CUBICS).

Mcu integration is an open-source printed circuit board by SkCubeSat, from the SkCubeSat/Analog-mini repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 70 × 70 mm with 81 parts on 100 nets, routed with 419 tracks and 211 vias.
It is built around the STM32F103RBT6, AD844JRZ-16-REEL7 and TL081IDT, with the DM3BT-DSF-PEJS, FOD814SD and LTC4300A-1IMS8#PBF among its other parts. Its parts include 34 capacitors, 19 resistors, 9 ICs, 7 connectors and 1 diode. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C6, C9, C20, C27 |
| 5 | 10K | Resistor_SMD:R_0402_1005Metric | R3, R4, R10, R11, R12 |
| 4 | 0.47u | Capacitor_SMD:C_0402_1005Metric | C14, C15, C16, C17 |
| 4 | 3.3K | Resistor_SMD:R_0402_1005Metric | R5, R6, R7, R8 |
| 4 | MountingHole_Pad | capstone:MountingHole_3.18mm_6.35mm_Pad | MH1, MH2, MH3, MH4 |
| 3 | 0.01u | Capacitor_SMD:C_0402_1005Metric | C23, C26, C43 |
| 3 | 0.1u | capstone:CAPC220145_88N_KEM-0.1u | C28, C32, C44 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric | C12, C13, C22 |
| 3 | 1u | Capacitor_SMD:C_0402_1005Metric | C7, C8, C33 |
| 2 | 0.22u | capstone:C0805-0.22u | C29, C30 |
| 2 | 100 | Resistor_SMD:R_0402_1005Metric | R26, R27 |
| 2 | 1751251 | Screw Terminal 1x3:CONN_1751251_PXC | J6, J7 |
| 2 | 1751264 | Screw Terminal 1x4:CONN_1751264_PXC | J3, J4 |
| 2 | 2.2k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C18 |
| 1 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C50 |
| 1 | 0.22n | Capacitor_SMD:C_0402_1005Metric | C21 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R22 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C19 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 1K | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R25 |
| 1 | 1u | capstone:C0805-1u | C31 |
| 1 | 2.2u | Capacitor_SMD:C_0402_1005Metric | C25 |
| 1 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C47 |
| 1 | 47 | Resistor_SMD:R_0402_1005Metric | R24 |
| 1 | 56k | Resistor_SMD:R_0402_1005Metric | R32 |
| 1 | 820 | Resistor_SMD:R_0402_1005Metric | R23 |
| 1 | AD844_OPAMP_AL | capstone:SOIC127P1032X265-16N-AD844 | IC6 |
| 1 | AD844_SHIELD | capstone:AD844 Shield | SH3 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | DM3BT-DSF-PEJS | capstone:DM3BT_DSF_PEJS | J5 |
| 1 | FOD814_OPTO_AL | capstone:SOP254P1016X385-4N-FOD | IC7 |
| 1 | FOD814_SHIELD | capstone:FOD814 Shield | SH1 |
| 1 | FerriteBead | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | LMT87DCKT | SamacSys_Parts:SOT65P210X110-5N | IC3 |
| 1 | LTC4300A-1IMS8_PBF | capstone:LTC4300A-1IMS8_PBF | U2 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | REF192_AL | capstone:R_8_ADI-REF | U3 |
| 1 | REF192_SHIELD | capstone:REF192 Shield | SH2 |
| 1 | RST_SW | capstone:95C04A3GWRT | S1 |
| 1 | STM32F103RBTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | TL081IDT | capstone:SOIC127P600X175-8N | IC2 |
| 1 | TL7660IDGKR | capstone:SOP65P490X110-8N-actual | IC1 |
| 1 | TPS79933QDDCRQ1 | TPS79933QDDCRQ1 (1):SOT95P280X110-5N | U4 |
It measures 70 × 70 mm and has 4 copper layers, 1.6 mm thick.
81 parts, built around the STM32F103RBT6, AD844JRZ-16-REEL7, TL081IDT and DM3BT-DSF-PEJS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SkCubeSat/Analog-mini repository on GitHub, at the commit this page was made from: the board is pcb/mcu_integration.kicad_pcb and its schematic pcb/Evan_-5V_and_signal_gen.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).

kaitallaoua/capstone-pcb
In collaboration with the University of Saskatchewan, we are contributing a payload board for the CubeSats Initiative in Canada for STEM (CUBICS).

TUDSSL/FreeBie
To compile FreeBie runtime we used the GNU Arm Embedded Toolchain (9.3.1) and CMake (3.19.1) to build the project. To program the MCU we used the J-Link debug probe with the accompanying J-Link software.

arsovskiteodor/A.ProdDeck
Open-hardware macro pad (WIP): custom KiCad PCB with keys, encoders and a fader, plus firmware and a desktop configurator


oresat/oresat-cfc-hardware
Cirrrus Flux Camera hardware repository


IlyaasAitSimmou/krakenbane_one_pcb
This GitHub Repository contains all kiCad files related to the SRAD data aqcuisition flight computer, KRAKENBANE I which was flown at Launch Canada on the Goldeneye rocket by the Turner Fenton Rocketry Association…