

Carte Major Tom
All you need to make your own Orbita_3d Joint!
- Size
- 55 × 54 mm
- Copper layers
- 2
- Thickness
- 1.59 mm
- Parts
- 78
- Nets
- 76
- Pads
- 363
- Tracks, vias
- 1,260, 333
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 12 Nov 2024
- Updated
- 13 Nov 2024
Overview
Carte Major Tom is an open-source printed circuit board by pollen-robotics, from the pollen-robotics/Orbita_3d_R1 repository on GitHub. It is a 2-layer board of 55 × 54 mm with 78 parts on 76 nets, routed with 1,260 tracks and 333 vias.
It is built around the NCS214RSQ, DRV8313PWP and AP63205WU, with the MAX31730AUB+ and AUIRF7341QTR among its other parts. Its parts include 24 capacitors, 22 resistors, 12 ICs, 9 connectors and 1 transistor. It belongs with the robots and motor control boards and the RP2350 boards of this library.
Main components
5NCS214RSQ
SC-70-6-300mV~26V -40℃~+125℃ 0.5uV/℃ 1 100V/V 125dB 1V/us 1uV 2.2V~26V 39uA 40uA 45nV/√Hz@1kHz 6kHz High-side detection、Low-side detection、Bidirectional detection、Zero drift / auto-zero、Input filter、Enable/shutdown function ±30V SC-70-6 Current Sense Amplifiers ROHSonsemiCurrent Sense AmplifiersDRV8313PWP
HTSSOP-28-EP-4.5mmHTSSOP-28-EP-4.5mm Brushless DC (BLDC) Motor Driver ROHSTexas InstrumentsMotor Driver ICsAP63205WU
TSOT-23-6-40℃~+85℃@(TA) 1 1.1MHz 22uA 2A 3.8V~32V 5V Buck Built-in Fixed Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Hiccup current limiting、EMI optimization (spread spectrum) Step-down type Yes TSOT-23-6 DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersMAX31730AUB+
UMAX-10-40℃~+125℃ 3V~3.6V UMAX-10 Interface - Specialized ROHSAnalog DevicesInterface - SpecializedAUIRF7341QTR
SO-8-55℃~+175℃ 1V 2 N-Channel 2.4W 43mΩ@10V 44nC 5.1A 55V 66pF 780pF SO-8 MOSFETs ROHSInfineon TechnologiesMOSFETs
README
electronic/elec_Houston/README.mdHouston Electronic Board
Houston board is basically a STM32G4 microcontroller that focuses on driving 3 BLDC motors. It gets 3 Hall effects or encoders on motors and absolute positions behind reduction through SPI encoders.

Basically
- 50 x 54 mm
- Powered in 3V3 through the large flat flexible connector J10
- 5V should also be provided since it supplies encoders J11/21/31
- Designed with KiCAD 6.0
ST configuration

Parts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10k | Resistor_SMD:R_0603_1608Metric | R10, R13, R14, R15, R20, R23, R24, R25, R30, R33, R34, R35 |
| 10 | 100n 63V | Capacitor_SMD:C_0603_1608Metric | C2, C10, C14, C15, C20, C24, C25, C30, C34, C35 |
| 6 | 10m | Resistor_SMD:R_1206_3216Metric | R11, R12, R21, R22, R31, R32 |
| 6 | NCS214 | Lib_Pollen:SC70-6 | U11, U12, U21, U22, U31, U32 |
| 4 | 10u 63V | Capacitor_SMD:CP_Elec_6.3x7.7 | C7, C11, C21, C31 |
| 3 | 100p | Capacitor_SMD:C_0603_1608Metric | C70, C71, C72 |
| 3 | 10n 63V | Capacitor_SMD:C_0603_1608Metric | C12, C22, C32 |
| 3 | DNP Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3 |
| 3 | DNP MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad_TopOnly | H1, H2, H3 |
| 3 | DRV8313 | Package_SO:HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP3.4x9.5mm | U10, U20, U30 |
| 3 | MicroFit3 | Connector_Molex:Molex_Micro-Fit_3.0_43650-0310_1x03-1MP_P3.00mm_Horizontal | J10, J20, J30 |
| 3 | Pico2 | Connector_Molex:Molex_PicoBlade_53398-0271_1x02-1MP_P1.25mm_Vertical | J70, J71, J72 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R70, R71 |
| 2 | 1u 6V3 | Capacitor_SMD:C_0603_1608Metric | C5, C6 |
| 2 | 22u 6V3 | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 1 | 180k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 6,8u 2A | Inductor_SMD:L_Bourns-SRN6028 | L1 |
| 1 | AP63205 | Package_TO_SOT_SMD:TSOT-23-6 | U2 |
| 1 | AUIRF7341Q | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q70 |
| 1 | DNP Logo Pollen 2021 | Lib_Pollen:Logo_Pollen_2021_sq | H6 |
| 1 | D_TVS_uni | Diode_SMD:D_SMA | D |
| 1 | FFC 0,5 mm 40w | Connector_FFC-FPC:Hirose_FH12-40S-0.5SH_1x40-1MP_P0.50mm_Horizontal | J1 |
| 1 | MAX31730 | Lib_Pollen:SOP50P490X110-10N | U70 |
| 1 | MCP1700T | Package_TO_SOT_SMD:SOT-23 | U3 |
| 1 | MicroFit2 | Connector_Molex:Molex_Micro-Fit_3.0_43650-0210_1x02-1MP_P3.00mm_Horizontal | J2 |
| 1 | Pico3 | Connector_Molex:Molex_PicoBlade_53398-0371_1x03-1MP_P1.25mm_Vertical | J73 |
| 1 | SYM_Hot_Small | Lib_Pollen:logo_hot | SYM1 |
More from pollen-robotics/Orbita_3d_R1
2- 4 layers50 × 54 mm

- 2 layers44.9 × 29.7 mm

Similar boards
- 2 layers80 × 50 mm

NHK 2025 circuit public var
TOBA-Robocon/NHK_2025_circuit_public_var
鳥羽商船Aチームが2025年度のNHK高専ロボコンで使用した基板(公開用に多少編集済み)
81 parts1 - 2 layers140 × 100 mm

- 4 layers35 × 35 mm

Foc8313
williamhaarhoff/foc8313
Highly compact field oriented controller based on the DRV8313 IC
155 parts9 - 2 layers50 × 40 mm

Bldc controller
nerdmaennchen/motorcontroller-hw
An open hardware PCB to control motors with (BLDC and DC)
67 parts6MIT - 2 layers65 × 50.1 mm

- 2 layers32.3 × 87.6 mm

ESP32-Gimbal
Visaging/ESP32-Gimbal
A high-performance, open-source 3-axis smartphone gimbal built from scratch using a custom PCB and the SimpleFOC library. It features real-time stabilization, native USB-C programming, and custom motion modes.
60 parts4MIT - 4 layers37.1 × 41 mm

- 2 layers142.5 × 99 mm

Questions
How big is the Carte Major Tom PCB?
It measures 55 × 54 mm and has 2 copper layers, 1.59 mm thick.
What parts does the Carte Major Tom use?
78 parts, built around the NCS214RSQ, DRV8313PWP, AP63205WU and MAX31730AUB+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Carte Major Tom KiCad files?
From the pollen-robotics/Orbita_3d_R1 repository on GitHub, at the commit this page was made from: the board is electronic/elec_Major_Tom/carte_Major_Tom.kicad_pcb and its schematic electronic/elec_Houston/carte_Houston.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Carte Major Tom design in my own project?
Its repository states no licence, so its author keeps all rights: ask pollen-robotics before reusing the design.