

PokerPlaque
- Size
- 39.5 × 38 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 42
- Pads
- 95
- Tracks, vias
- 342, 21
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 31 Jul 2024
- Updated
- 11 Oct 2024
Overview
PokerPlaque is an open-source printed circuit board by Poker-NG, from the Poker-NG/Plaque repository on GitHub, published under the MIT licence. It is a 2-layer board of 39.5 × 38 mm with 15 parts on 42 nets, routed with 342 tracks and 21 vias.
It is built around the CH32V203C8T6, M24C32-RMN6TP and A2541WR-2P, with the A2541WR-4P, A2541WR-5P and A2541WR-8P among its other parts. Its parts include 7 resistors, 4 connectors, 2 ICs, 1 diode and 1 switch. It belongs with the RISC-V boards of this library.
Main components
8CH32V203C8T6
LQFP-48(7x7)144MHz 64KB FLASH Others LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSWCH (Nanjing Qinheng Microelectronics)Microcontrollers (MCU/MPU/SOC)M24C32-RMN6TP
SOIC-8-40℃~+85℃ 1,200,000 cycles 1.8V~5.5V 200 Years 32Kbit 400kHz~1MHz 5ms Hardware write protection function、Noise suppression function、Built-in power-on reset (POR)、Built-in error correction code (ECC) function I2C SOIC-8 EEPROM ROHSSTMicroelectronicsEEPROMA2541WR-2P
弯插,P=2.54mm-40℃~+105℃ 1 1x2P 2.54mm 2.54mm 250V 2P 3A 6mm Black Brass Gold Pin Header Right Angle 弯插,P=2.54mm Pin Headers ROHSCJTPin HeadersA2541WR-4P
弯插,P=2.54mm-40℃~+105℃ 1 1x4P 2.54mm 2.54mm 250V 3A 4P 6mm Black Brass Gold Pin Header Right Angle 弯插,P=2.54mm Pin Headers ROHSCJTPin HeadersA2541WR-5P
弯插,P=2.54mm-40℃~+105℃ 1 1x5P 2.54mm 2.54mm 250V 3A 5P 6mm Black Brass Gold Pin Header Right Angle 弯插,P=2.54mm Pin Headers ROHSCJTPin HeadersA2541WR-8P
弯插,P=2.54mm-40℃~+105℃ 1 1x8P 2.54mm 2.54mm 250V 3A 6mm 8P Black Brass Gold Pin Header Right Angle 弯插,P=2.54mm Pin Headers ROHSCJTPin HeadersKH-6X6X6H-STM
SMD-4P,6x6mm12V 50mA 6mm 6mm 6mm 80,000 cycles Black Gull Wing Round Button SPST Surface Mount,Vertical Without Bracket SMD-4P,6x6mm Tactile Switches ROHSShenzhen Kinghelm ElecTactile SwitchesNFD3401URD
插件,D=3mm-30℃~+85℃ 2.4V 20mA 35° 3mm Round Lens 620nm~630nm 700mcd 75mW Discrete Diode Frosted Red Lens Red 插件,D=3mm LED Indication - Discrete ROHSFoshan NationStar OptoelectronicsLED Indication - Discrete
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1210W2J0103T5E | Resistor_SMD:R_1210_3225Metric | R2, R3, R4, R5, R6, R7 |
| 1 | 1210W2F1001T5E | Resistor_SMD:R_1210_3225Metric | R1 |
| 1 | A2541WR-2P | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J3 |
| 1 | A2541WR-4P | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J2 |
| 1 | A2541WR-5P | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Horizontal | J1 |
| 1 | A2541WR-8P | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Horizontal | J4 |
| 1 | CH32V203C8T6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | KH-6X6X6H-STM | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1 |
| 1 | M24C32-RMN6TP | M24C32-RMN6TP:SOIC127P600X175-8N | IC1 |
| 1 | NFD3401URD | LED_THT:LED_D3.0mm | D1 |
Similar boards
- 2 layers65 × 30.5 mm

- 2 layers114 × 49.3 mm

Solderbit gamepad
devices-lab/solderbit-gamepad
Learn-to-solder kit for the BBC micro:bit
58 parts4GPL-3.0 - 4 layers60 × 50 mm

Embassy turtle
so-groenen/embassy_pico_turtle
Embedded IoT Turtle Tank controller based on the rp2350 microcontroller
45 partsGPL-3.0 - 2 layers66.5 × 35.8 mm

- 2 layers51.3 × 48.2 mm

- 4 layers114.9 × 129.9 mm

Tanmatsu
Nicolai-Electronics/tanmatsu-hardware
Hardware design of the Tanmatsu mainboard
372 parts9CERN-OHL-P-2.0 - 2 layers96.6 × 100 mm

- 4 layers36.6 × 39.6 mm

RISKYX68000
arkadiuszmakarenko/RISKYX68000
RISKYX68000 Mouse, Keyboard and Gamepad support
32 parts2MIT
Questions
How big is the PokerPlaque PCB?
It measures 39.5 × 38 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PokerPlaque use?
15 parts, built around the CH32V203C8T6, M24C32-RMN6TP, A2541WR-2P and A2541WR-4P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PokerPlaque KiCad files?
From the Poker-NG/Plaque repository on GitHub, at the commit this page was made from: the board is Hardware/PokerPlaque.kicad_pcb and its schematic Hardware/PokerPlaque.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PokerPlaque design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).