

Hplora
- Size
- 65 × 30.5 mm
- Copper layers
- 2
- Thickness
- 1.58 mm
- Parts
- 20
- Nets
- 33
- Pads
- 98
- Tracks, vias
- 193, 248
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 5 Dec 2024
- Updated
- 5 Dec 2024
Overview
Hplora is an open-source printed circuit board by db4rne, from the db4rne/raspi_lora_hat repository on GitHub. It is a 2-layer board of 65 × 30.5 mm with 20 parts on 33 nets, routed with 193 tracks and 248 vias.
It is built around the M24C32-RMN6TP. Its parts include 4 capacitors, 3 resistors, 2 ICs and 2 connectors.
Main components
1Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 2 | DNP | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 3.9k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | Conn_Coaxial_Small | Connector_Coaxial:SMA_Amphenol_132289_EdgeMount | J2 |
| 1 | DNP | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | DNP | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | DNP | Capacitor_SMD:C_1206_3216Metric | C4 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.0mm | TP18 |
| 1 | Jmp_EEPROM_WP | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | M24C32-RMN6TP | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | RX | TestPoint:TestPoint_Pad_D1.0mm | TP11 |
| 1 | Raspberry_Pi_2_3 | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical_SMD | J1 |
| 1 | TX | TestPoint:TestPoint_Pad_D1.0mm | TP12 |
| 1 | ~ | arnes_ebyte:E22-xxxM33S | U1 |
The 19 most common of 20 parts.
Similar boards
- 2 layers39.5 × 38 mm

- 2 layers66.9 × 74.5 mm

- 2 layers86.4 × 64.8 mm

- 2 layers36.2 × 26.8 mm

Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm

Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm

TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm

Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0 - 2 layers44.3 × 28.7 mm

Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915
Questions
How big is the Hplora PCB?
It measures 65 × 30.5 mm and has 2 copper layers, 1.58 mm thick.
What parts does the Hplora use?
20 parts, built around the M24C32-RMN6TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hplora KiCad files?
From the db4rne/raspi_lora_hat repository on GitHub, at the commit this page was made from: the board is pcb/hplora/hplora.kicad_pcb and its schematic pcb/hplora/hplora.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hplora design in my own project?
Its repository states no licence, so its author keeps all rights: ask db4rne before reusing the design.