4 layers120 × 70 mm
Radio daughterboard
EwoudVV/ducktop2
An open-source 16-inch laptop designed from scratch.
126 parts26MIT
4 layers65 × 64 mm
Piweather
pluggee/piweather1raspberry pi based system for weather monitoring and automation
- Size
- 65 × 64 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 60
- Nets
- 49
- Pads
- 305
- Tracks, vias
- 508, 122
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 3 Oct 2019
- Updated
- 15 Jul 2022
Overview
Piweather is an open-source printed circuit board by pluggee, from the pluggee/piweather repository on GitHub, published under the MIT licence. It is a 4-layer board of 65 × 64 mm with 60 parts on 49 nets, routed with 508 tracks and 122 vias.
It is built around the PSK-S5B-5, THVD1500D and V78E05-1000-SMT-TR, with the SI7020-A20-GM, TLV61046ADBV and 74HC14 among its other parts. Its parts include 15 capacitors, 12 resistors, 12 connectors, 8 ICs and 2 transistors.
Main components
12PSK-S5B-5
DIP,37x24.5mm-40℃~+70℃ 1 100kHz 100mVp-p 18mm 1A 24.5mm 37mm 5000uF 5V 75% Plastic encapsulated type Short Circuit Protection、Over Current Protection、Overvoltage protection、Automatic fault recovery ±2% DIP,37x24.5mm AC-DC Power Modules ROHSCUIDC-DC Power Modules
THVD1500D
SOIC-8-40℃~+125℃ 1 1 256 300Kbps 4.5V~5.5V 660uA Half-Duplex Transceiver ±16kV SOIC-8 RS-485 / RS-422 ICs ROHSTexas InstrumentsRS-485 / RS-422 ICs
V78E05-1000-SMT-TR
SMD-8P,15.2x8.5mm-40℃~+85℃ 15.24mm 1A 200uA 520kHz 5V 680uF 75mVp-p 8.25mm 8.5mm 8V~36V 93% Short Circuit Protection、Automatic fault recovery、Programmable output voltage ±2% SMD-8P,15.2x8.5mm DC-DC Power Modules ROHSCUIDC-DC Power Modules
SI7020-A20-GM
DFN-6-EP(3x3)-40℃~+85℃ 0%RH~100%RH 1.9V~3.6V 12bit 150uA 4%RH Factory calibration、Built-in heater I2C ±0.4℃ DFN-6-EP(3x3) Temperature and Humidity Sensor ROHSSilicon LabsTemperature And Humidity Sensor
TLV61046ADBV
SOT-23-6-40℃~+125℃@(TJ) 1 1.05MHz 1.8V~5.5V 110uA 3.3V~28V Adjustable Boost Boost Built-in No Overcurrent Protection、Light load efficient mode、Load disconnect SOT-23-6 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
74HC14
SOP-14-40℃~+85℃ 1.9V、3.98V、4.4V、5.48V、5.9V 100mV、260mV、260mV 20uA 25ns@4.5V,50pF 2V~6V 6 74HC Noise suppression function Schmitt trigger SOP-14 Inverters ROHSJSMSEMIInverters
FT2232D
LQFP48Dual USB UART / FIFO I.C.FTDIUncategorisedLM339
SOP-140℃~+70℃ 1.1mA 1.5mV 150ns 2.3nA 2V~32V 32V 57nA DTL、TTL、CMOS Four channels Open Collector SOP-14 Comparators ROHSJSMSEMIComparators
CC0603KRX7R9BB104
0603100nF 50V X7R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMT
RC0603FR-0710KL
UncategorisedUnknown makerCC0603KRX7R9BB333
060333nF 50V X7R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMTRC0603FR-071K5L
UncategorisedUnknown maker
README
README.mdpiweather
raspberry pi based system for weather monitoring and automation
Parts
60| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | CC0603KRX7R9BB104 | Main:CAPC0603 | C5, C6, C7, C8, C9, C11, C13, C14, C15 |
| 5 | MountingHole | Main:RPi_Hat_Mounting_Hole | H1, H2, H3, H4, H6 |
| 4 | Conn_01x01_Male | Main:POGOPIN_5mm_P70-2300045R | J6, J7, J8, J9 |
| 4 | GRM21BR60J476ME15K | Main:CAPC0805 | C1, C2, C10, C12 |
| 4 | RC0603FR-0730K1L | Main:RESC0603 | R9, R10, R11, R12 |
| 3 | Conn_01x03_Male | Main:SOCKET200P-01X03-S3B-PH-K-S(LF)(SN) | J5, J10, J11 |
| 3 | RC0603FR-0710KL | Main:RESC0603 | R2, R4, R5 |
| 2 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 74HC14 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U7 |
| 1 | ART | Symbol:KiCad-Logo2_6mm_SilkScreen | A3 |
| 1 | ART | pluggee:pluggee-QRNEG-127X127 | A2 |
| 1 | ART | pluggee:pluggeeLogo | A1 |
| 1 | CC0603KRX7R9BB333 | Main:CAPC0603 | C3 |
| 1 | CP | Capacitor_SMD:C_1206_3216Metric | C4 |
| 1 | Conn_01x02_Male | Main:AC_terminal_4300.0104 | J12 |
| 1 | Conn_01x08_Male | Main:PICOBLADE_FEMALE_8 | J2 |
| 1 | FT2232D | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | Ferrite_Bead_Small | Main:CAPC0603 | FB1 |
| 1 | L | Inductor_SMD:L_Wuerth_MAPI-3020 | L1 |
| 1 | LM339 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U8 |
| 1 | PSK-S5B-5 | Main:PSK-S5B-5 | U2 |
| 1 | RC0603FR-071K5L | Main:RESC0603 | R1 |
| 1 | RC0603FR-071ML | Main:RESC0603 | R7 |
| 1 | RC0603FR-0734KL | Main:RESC0603 | R8 |
| 1 | RC0603FR-07475RL | Main:RESC0603 | R3 |
| 1 | RC1206FR-071ML | Main:RESC1206 | R6 |
| 1 | Raspberry_Pi_2_3 | Main:RPi_2x20_SMT | J4 |
| 1 | Resonator | Main:RESONTATOR_450X200 | Y1 |
| 1 | Screw_Terminal_01x02 | Main:TerminalBlock_1X2_P5.08mm | J3 |
| 1 | Screw_Terminal_01x10 | Main:Terminal_block_OSTVN10A150 | J1 |
| 1 | Si7020-A20 | Package_DFN_QFN:DFN-6-1EP_3x3mm_P1mm_EP1.5x2.4mm | U5 |
| 1 | THVD1500 | Main:SOIC127P490X390X175-8 | U3 |
| 1 | TLV61046ADB | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | V78E05-1000-SMT-TR | Main:V78E05-1000-SMT-TR | U4 |
Questions
How big is the Piweather PCB?
It measures 65 × 64 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Piweather use?
60 parts, built around the PSK-S5B-5, THVD1500D, V78E05-1000-SMT-TR and SI7020-A20-GM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Piweather KiCad files?
From the pluggee/piweather repository on GitHub, at the commit this page was made from: the board is pcb/piweather.kicad_pcb and its schematic pcb/piweather.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Piweather design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers160 × 73.2 mm
MainPCB
doppelgrau/esp32-f9p-io-board
An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.
162 parts39 - 4 layers52 × 42 mm
- 2 layers30 × 30 mm
- 4 layers71.5 × 33 mm
USB to RS485-Converter Small
jonghee-son/USB-to-RS485-Converter-Small
USB to RS485 Converter made with SMD parts
20 parts - 2 layers60 × 60 mm
- 4 layers175 × 68.5 mm
- 4 layers76.9 × 67.3 mm
