
Karnix ASB
Fabmicro-LLC/Karnix_ASB-254
Karnaugh Interactive Extendable ASIC Simulation Board AKA Karnix ASB-254
FTDI
Dual USB UART / FIFO I.C.
The FT2232D is an uncategorised made by FTDI in a LQFP48 package with 48 pins. Dual USB UART / FIFO I.C.
PCBKit's library has its KiCad symbol (Interface_USB:FT2232D, from KiCad's library) and its footprint (Package_QFP:LQFP-48_7x7mm_P0.5mm, from KiCad's library), ready for a KiCad board. 19 open-source boards in 19 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | EECLK | Output |
| 2 | EEDATA | Input/output |
| 3 | VCC | Power in |
| 4 | RESET | Input |
| 5 | RSTOUT | Output |
| 6 | 3V3OUT | Power out |
| 7 | USBDP | Input/output |
| 8 | USBDM | Input/output |
| 9 | GND | Power in |
| 10 | SI/WUA | Input/output |
| 11 | ACBUS3 | Input/output |
| 12 | ACBUS2 | Input/output |
| 13 | ACBUS1 | Input/output |
| 14 | VCCIOA | Power in |
| 15 | ACBUS0 | Input/output |
| 16 | ADBUS7 | Input/output |
| 17 | ADBUS6 | Input/output |
| 18 | GND | Power in |
| 19 | ADBUS5 | Input/output |
| 20 | ADBUS4 | Input/output |
| 21 | ADBUS3 | Input/output |
| 22 | ADBUS2 | Input/output |
| 23 | ADBUS1 | Input/output |
| 24 | ADBUS0 | Input/output |
| 25 | GND | Power in |
| 26 | SI/WUB | Output |
| 27 | BCBUS3 | Output |
| 28 | BCBUS2 | Output |
| 29 | BCBUS1 | Output |
| 30 | BCBUS0 | Output |
| 31 | VCCIOB | Power in |
| 32 | BDBUS7 | Output |
| 33 | BDBUS6 | Output |
| 34 | GND | Power in |
| 35 | BDBUS5 | Output |
| 36 | BDBUS4 | Output |
| 37 | BDBUS3 | Output |
| 38 | BDBUS2 | Output |
| 39 | BDBUS1 | Output |
| 40 | BDBUS0 | Output |
| 41 | PWREN | Output |
| 42 | VCC | Power in |
| 43 | XTIN | Input |
| 44 | XTOUT | Output |
| 45 | AGND | Power in |
| 46 | AVCC | Power in |
| 47 | TEST | Input |
| 48 | EECS | Input/output |

Fabmicro-LLC/Karnix_ASB-254
Karnaugh Interactive Extendable ASIC Simulation Board AKA Karnix ASB-254

mnemocron/FHNW-Pro4E-FS19T8-3DPrinterBoard-STM32
Marlin 2.0 compatible 3D printer board based on STM32F103 (KiCad)

esar/hdmilight-v3
HDMI Light v3 - FPGA based Ambilight clone with direct HDMI input

LUMERIIX/FrequencyCounter
FPGA based frequnecy counter hard- and software repository


reedtaylor/daybreak_mk3
A PCB interface between the Decent Espresso DE1 and USB or Adafriuit Feather HUZZAH32 EESP32

pluggee/piweather
raspberry pi based system for weather monitoring and automation

the78mole/ModBus-RJ45-Breakout-2
The second iteration of the breakout with a Dual-USB-Serial-Converter (FT2232)
Yes. The symbol is Interface_USB:FT2232D and the footprint Package_QFP:LQFP-48_7x7mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
LQFP48, with 48 pins. Its footprint is drawn on this page.
Parts like it in the library: the HK32F030C8T6A by HK, the CH338L by WCH (Nanjing Qinheng Microelectronics), the AT32F402CBT7 by ARTERY and the STM32C071CBT6 by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
19 boards in 19 repositories on GitHub; the most starred are listed on this page, with their KiCad files.