
FC REV A
desanv01/Flight-Controller-V1
STM32H743 flight controller: staged design, six-layer PCB implementation, manufacturing data and engineering history.

Dev Module for STM32F446VETx
STM32F446VE Module v1 is an open-source printed circuit board by pipipipi2002, from the pipipipi2002/stm32f446vetx-dev-module repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 65 × 45 mm with 88 parts on 154 nets, routed with 1,388 tracks and 223 vias.
It is built around the TCAN332GD, FT232RNL and MIC5219-3.3YM5, with the USBLC6-2SC6, BAT760 and BM04B-GHS-TBT(LF)(SN) among its other parts. Its parts include 25 capacitors, 19 resistors, 11 diodes, 8 connectors and 5 ICs. It belongs with the STM32 boards of this library.
Refer to interactive BOM
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C5, C6, C8, C10, C11, C12, C13, C14, C15, C16, C19 |
| 8 | 330 | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R6, R7, R8, R9, R12 |
| 5 | 5k1 | Resistor_SMD:R_0603_1608Metric | R10, R11, R13, R14, R18 |
| 4 | 1u | Capacitor_SMD:C_0603_1608Metric | C2, C7, C17, C18 |
| 4 | 22 | Resistor_SMD:R_0603_1608Metric | R1, R2, R15, R17 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_Pad_Via | H1, H2, H3, H4 |
| 3 | GND | TestPoint:TestPoint_Pad_D1.5mm | TP4, TP5, TP8 |
| 2 | 2u2 | Capacitor_SMD:C_0603_1608Metric | C24, C25 |
| 2 | 6p | Capacitor_SMD:C_0603_1608Metric | C20, C21 |
| 2 | 8p | Capacitor_SMD:C_0603_1608Metric | C22, C23 |
| 2 | BAT760 | Diode_SMD:D_SOD-323_HandSoldering | D1, D2 |
| 2 | BM04B-GHS-TBT(LF)(SN) | Connector_JST:JST_GH_BM04B-GHS-TBT_1x04-1MP_P1.25mm_Vertical | J7, J8 |
| 2 | DF40C-60DP-0.4V_51_ | whose_lib:DF40C-60DP-0.4V_51_ | J4, J5 |
| 2 | SW_DIP_x02 | whose_lib:218-2LPSTRF | SW2, SW3 |
| 1 | +3.3V | TestPoint:TestPoint_Pad_D1.5mm | TP6 |
| 1 | +VDC | TestPoint:TestPoint_Pad_D1.5mm | TP9 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R19 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 20MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | X1 |
| 1 | 2u2 | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C4 |
| 1 | 32kHz768 | Crystal:Crystal_SMD_2012-2Pin_2.0x1.2mm_HandSoldering | X2 |
| 1 | 3V3_LED | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | 470p | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | BM02B-GHS-TBT(LF)(SN) | Connector_JST:JST_GH_BM02B-GHS-TBT_1x02-1MP_P1.25mm_Vertical | J6 |
| 1 | CAN+ | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
| 1 | CAN- | TestPoint:TestPoint_Pad_D1.5mm | TP3 |
| 1 | CRX_LED | LED_SMD:LED_0603_1608Metric | D7 |
| 1 | CTX_LED | LED_SMD:LED_0603_1608Metric | D8 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030 | Connector:Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_Vertical | J2 |
| 1 | FT232RN | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U3 |
| 1 | GP_LED | LED_SMD:LED_0603_1608Metric | D6 |
| 1 | MIC5219-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | Micro_SD_Card_Det_Hirose_DM3AT | Connector_Card:microSD_HC_Hirose_DM3D-SF | J3 |
| 1 | NUP2105LT1G | Package_TO_SOT_SMD:SOT-23 | D11 |
| 1 | RX_LED | LED_SMD:LED_0603_1608Metric | D10 |
| 1 | STM32F446VETx | Package_QFP:LQFP-100_14x14mm_P0.5mm | U5 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW1 |
| 1 | TCAN332G | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | TX_LED | LED_SMD:LED_0603_1608Metric | D9 |
| 1 | UART5_RX | TestPoint:TestPoint_Pad_D1.5mm | TP10 |
| 1 | UART5_TX | TestPoint:TestPoint_Pad_D1.5mm | TP7 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | VBUS | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | VBUS_LED | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | VBus_Connect | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | VDC_LED | LED_SMD:LED_0603_1608Metric | D4 |

desanv01/Flight-Controller-V1
STM32H743 flight controller: staged design, six-layer PCB implementation, manufacturing data and engineering history.

pipipipi2002/embedded-controls
An attempt to understand control theories using accelerometer, gyroscopes, magnetometer and barometer.


xmyoot/custom-round-pcb-led-flash
Custom circular ring PCB LED flash controller prototype


willianlunca/termokip_hardware
Repositório com arquivos de todo o projeto BillCold

JaredGarza/Osiris_PDB_RevA
This repository contains the current KiCad 10 power distribution board project. Open OsirisPDBRevA.kicadpro to edit the schematic and PCB.

VEXU-GHOST/ghost_kicad
Welcome to UT IEEE RAS VEXU GHOST's repository for our PCB developments! - PCB Images - Onboarding
It measures 65 × 45 mm and has 4 copper layers, 1.61 mm thick.
88 parts, built around the TCAN332GD, FT232RNL, MIC5219-3.3YM5 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pipipipi2002/stm32f446vetx-dev-module repository on GitHub, at the commit this page was made from: the board is hardware/STM32F446VE-Module-v1/STM32F446VE-Module-v1.kicad_pcb and its schematic hardware/STM32F446VE-Module-v1/STM32F446VE-Module-v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).