Skip to the content
12345678910111213141516171819202122232425262728

FT232RNL

FTDI

USB Full Speed to Serial UART IC, Includes Oscillator and EEPROM

Part id
ftdi/FT232RNL
Category
Uncategorised
Package
SSOP28
Pins
28
Used on
10 open-source boards

Overview

The FT232RNL is an uncategorised made by FTDI in a SSOP28 package with 28 pins. USB Full Speed to Serial UART IC, Includes Oscillator and EEPROM.

PCBKit's library has its KiCad symbol (Analog & Interface:FT232RNL, from CERN's library) and its footprint (Package_SO:SSOP-28_5.3x10.2mm_P0.65mm, from KiCad's library), ready for a KiCad board. 10 open-source boards in 7 repositories on GitHub use it.

Symbol

173V3OUT16USBDM15USBDP19RESET27OSCI28OSCO26TEST20VCC4VCCIO8NC24NC1TxD5RxD3RTS11CTS2DTR9DSR10DCD6RI23CBUS022CBUS113CBUS214CBUS312CBUS421GND18GND7GND25AGND
Analog & Interface:FT232RNLFrom CERN's library

Footprint

12345678910111213141516171819202122232425262728
Package_SO:SSOP-28_5.3x10.2mm_P0.65mmFrom KiCad's library

Pinout

28
The pins of the FT232RNL
PinNameType
1TxDOutput
2DTROutput
3RTSOutput
4VCCIOPower in
5RxDInput
6RIInput
7GNDPower in
8NCPassive
9DSRInput
10DCDInput
11CTSInput
12CBUS4Input/output
13CBUS2Input/output
14CBUS3Input/output
15USBDPInput/output
16USBDMInput/output
173V3OUTOutput
18GNDPower in
19RESETInput
20VCCPower in
21GNDPower in
22CBUS1Input/output
23CBUS0Input/output
24NCPassive
25AGNDPower in
26TESTInput
27OSCIInput
28OSCOOutput

Open-source boards using it

10See all 10
  • 4 layers65 × 45 mmSTM32F446VE Module v1, the printed circuit board in 3D

    STM32F446VE Module v1

    pipipipi2002/stm32f446vetx-dev-module

    Dev Module for STM32F446VETx

    88 parts2GPL-3.0
  • 2 layers150 × 100 mmSatelliteController2.0, the printed circuit board in 3D

    SatelliteController2.0

    tokai-student-rocket-project/Gen6-GSE-Elec

    第6世代自動GSE電装系

    228 parts2MIT
  • 4 layers193 × 114.3 mmSwanGanzInterface V1.1, the printed circuit board in 3D

    SwanGanzInterface V1.1

    ATK-1/SeniorDesign_SwanGanz

    The contributors to this senior design project were Nathan DeLaRosa, Ashton Knecht, Jack Son, and Jerry Xia under the supervision of Dr. Jonathan Valvano.

    154 parts
  • 2 layers38 × 38 mmRS485 hardware, the printed circuit board in 3D

    RS485 hardware

    BatteryTesterEngineering/Neware_RS485

    Neware BTS4000 series battery cyclers RS485 communication protocol, reverse engineered

    21 partsGPL-3.0
  • 2 layers65 × 56 mmCARL Air Brake Power Supply Hardware, the printed circuit board in 3D

    CARL Air Brake Power Supply Hardware

    Kenneth-Goveas/CARL-Air-Brake-Power-Supply-Hardware

    This repository contains the electronic hardware design for the power supply module of the [CARL Air Brake][cab-repo] computer.

    90 parts
  • 2 layers50 × 16 mmKosmoserial v2, the printed circuit board in 3D

    Kosmoserial v2

    kosma/usb-c-everywhere

    I Put USB-C Everywhere (and you can't stop me)

    21 parts5
  • 2 layers150 × 100 mmLaunchController2.0, the printed circuit board in 3D

    LaunchController2.0

    tokai-student-rocket-project/Gen6-GSE-Elec

    第6世代自動GSE電装系

    188 parts2MIT
  • 2 layers120 × 79 mmNX J401-Adapter, the printed circuit board in 3D

    NX J401-Adapter

    RealtimeRoboticsGroup/electrical

    This project is open-source hardware and is licensed under the Solderpad Hardware License v2.1 (the "License"), which is a permissive license based on the Apache License, Version 2.0.

    80 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the FT232RNL?

Yes. The symbol is Analog & Interface:FT232RNL and the footprint Package_SO:SSOP-28_5.3x10.2mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the FT232RNL?

SSOP28, with 28 pins. Its footprint is drawn on this page.

What can replace the FT232RNL?

Parts like it in the library: the AIP1640VB28.TB by Wuxi I-core Elec, the WM8731SEDS/V by Cirrus Logic, the LTC1409CG by Analog Devices and the LTC1668CG by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the FT232RNL?

10 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.