Skip to the content
2 layers313.3 × 128.6 mmSplit keyboard analog pad - コピー, the printed circuit board in 3D

Split keyboard analog pad - コピー

pienchandayo/Split_keyboard_analog_pad
Size
313.3 × 128.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
164
Nets
134
Pads
676
Tracks, vias
852, 97
Pours
8
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
6 Feb 2026
Updated
18 Jun 2026

Overview

Split keyboard analog pad - コピー is an open-source printed circuit board by pienchandayo, from the pienchandayo/Split_keyboard_analog_pad repository on GitHub. It is a 2-layer board of 313.3 × 128.6 mm with 164 parts on 134 nets, routed with 852 tracks and 97 vias.

It is built around the 1N4148W and WS2812B. Its parts include 6 connectors, 4 diodes and 2 ICs. It belongs with the keyboards and input boards and the nRF52 and nRF5x boards of this library.

Main components

2

Parts

164
QtyValueFootprintReferences
641N4148WDiode_SMD:D_SOD-123D_L_0_0, D_L_0_1, D_L_0_2, D_L_0_3, D_L_0_4, D_L_0_5, D_L_0_8, D_L_0_9, D_L_0_10, D_L_0_11, D_L_0_12, D_L_0_13, D_L_1_0, D_L_1_1, D_L_1_10, D_L_1_11 +48
58SW_PushPCM_Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_1.00uSW_L_0_0, SW_L_0_1, SW_L_0_2, SW_L_0_3, SW_L_0_4, SW_L_0_5, SW_L_0_8, SW_L_0_9, SW_L_0_10, SW_L_0_11, SW_L_0_12, SW_L_0_13, SW_L_1_0, SW_L_1_1, SW_L_1_10, SW_L_1_11 +42
11MountingHole_2.2mm_M2MountingHole:MountingHole_2.2mm_M2M2, M2, M2, M2, M2, M2, M2, M2, M2, M2, M2
4SW_PushPCM_Switch_Keyboard_Kailh:SW_Kailh_Choc_V2_1.00uSW_L_4_5_SUB1, SW_L_4_6_SUB1, SW_L_4_7_SUB1, SW_L_4_8_SUB1
4WS2812BLED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mmD1, D2, D3, D4
2Conn_01x02Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_HorizontalJ5, J6
2Conn_01x05_Pinanalog_pad:Switch_joy_padJ1, J2
2Conn_01x08_PinConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ3, J4
2SW_PushPCM_Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_2.00uSW_L_4_4, SW_L_4_9
2SW_PushButton_Switch_SMD:SW_SPST_Omron_B3FS-100xPSW_RST_L1, SW_RST_R1
2nice_nanoNicenano:nice_nanoU1, U2

The 153 most common of 164 parts.

More from pienchandayo/Split_keyboard_analog_pad

2
  • 2 layers25.1 × 36.3 mmSub pcb, the printed circuit board in 3D

    Sub pcb

    pienchandayo/Split_keyboard_analog_pad

    13 parts
  • 2 layers25.1 × 36.3 mmSub pcb, the printed circuit board in 3D

    Sub pcb

    pienchandayo/Split_keyboard_analog_pad

    9 parts

Similar boards

  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 2 layers285.5 × 95 mmReviung46 ver1 1, the printed circuit board in 3D

    Reviung46 ver1 1

    gtips/reviung

    The REVIUNG41 is 41-key column staggered keyboard.

    119 parts517MIT
  • 2 layers309.9 × 119.8 mmCockpit, the printed circuit board in 3D

    Cockpit

    ozkan/Cockpit-Keyboard

    A hot swap system column staggered mechanical keyboard, running QMK Firmware on Pro Micro controllers.

    144 parts43MIT
  • 2 layers233.7 × 91.5 mmSkywatch, the printed circuit board in 3D

    Skywatch

    ozkan/skywatch

    35% ergonomic ortholinear keyboard, powered by RP2040, along with OLED and hotswap sockets support

    133 parts41MIT
  • 2 layers148.6 × 192.2 mmBadge, the printed circuit board in 3D

    Badge

    NuttyShell/NuttyBadge

    NuttyBadge: A NuttyShell crafted multi-tool. Opensourced Hardawre and Software

    169 parts31GPL-3.0
  • 2 layers247.7 × 127 mmEuclid36, the printed circuit board in 3D

    Euclid36

    sadekbaroudi/euclid36

    At the time of creation, using Kicad 5.1.9 - This may not work with future versions

    130 parts24
  • 2 layers356.4 × 105.3 mmAvlo44, the printed circuit board in 3D

    Avlo44

    johnplanow/avlokbd

    Avlo44 is a 6x3+4 column-staggered, split, unibody keyboard.

    112 parts20MIT
  • 2 layers260.9 × 107.2 mmReviungDash, the printed circuit board in 3D

    ReviungDash

    tumler/ReviungDash

    Single Body Mechanical Keyboard inspired by the Reviung and Ergodash keyboards

    126 parts19MIT

Questions

How big is the Split keyboard analog pad - コピー PCB?

It measures 313.3 × 128.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Split keyboard analog pad - コピー use?

164 parts, built around the 1N4148W and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Split keyboard analog pad - コピー KiCad files?

From the pienchandayo/Split_keyboard_analog_pad repository on GitHub, at the commit this page was made from: the board is Split_keyboard_analog_pad/Split_keyboard_analog_pad - コピー.kicad_pcb and its schematic Split_keyboard_analog_pad/Split_keyboard_analog_pad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Split keyboard analog pad - コピー design in my own project?

Its repository states no licence, so its author keeps all rights: ask pienchandayo before reusing the design.