
Ripplecounter
jackw01/ripplecounter
Sensorless brushed DC motor position control with Raspberry Pi Pico

Driving an AC Yaesu G-5500 Az+El with DC-source PWM from a Raspberry Pi.
G5500-pidrive is an open-source printed circuit board by philcrump, from the philcrump/g5500-pidrive repository on GitHub, published under the MIT licence. It is a 2-layer board of 90 × 108 mm with 106 parts on 97 nets, routed with 780 tracks and 65 vias.
It is built around the TEL 12-4811WI, DRV8251ADDA and MCP3202-CI/P, with the 74LS32SC and MAX22530AWE+ among its other parts. Its parts include 35 resistors, 32 capacitors, 12 ICs, 10 connectors and 8 inductors.
1x LTC4311 SOT-323-5
4x DRV8251A
4x 8X11.5mm LS:5mm 82uF 63V 667-EEU-FR1J820B
Ferrites: 0805 40mohm 3A 652-MH2029-800Y
1x 579-MCP3202BISN MCP3202 B-grade SOIC
1x MAX22530AWE+ Isolated ADC
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 22R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20 |
| 11 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C4, C5, C6, C9, C15, C16, C18, C19, C28 |
| 10 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R25, R26, R28, R29, R30, R31, R32, R33, R34, R35 |
| 10 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C8, C10, C11, C12, C13, C14, C17, C29, C30 |
| 8 | L_Small | Inductor_THT:L_Axial_L5.3mm_D2.2mm_P10.16mm_Horizontal_Vishay_IM-1 | L1, L2, L3, L4, L5, L6, L7, L8 |
| 8 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R21, R22, R23, R24 |
| 5 | FerriteBead_Small | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | FB1, FB2, FB3, FB4, FB5 |
| 4 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C20, C21, C22, C23 |
| 4 | 47u | Capacitor_THT:C_Radial_D8.0mm_H11.5mm_P3.50mm | C24, C25, C26, C27 |
| 4 | Conn_01x03_Socket | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-3_1x03_P2.54mm_Horizontal | J6, J7, J8, J9 |
| 4 | DRV8251A | agg:SOIC-8-EP | IC3, IC4, IC5, IC6 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 3 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R27 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C31, C32 |
| 2 | 74LS32 | agg:SOIC-14 | U5, U6 |
| 2 | TLV70233_SOT23-5 | Package_TO_SOT_SMD:SOT-23-5 | U1, U2 |
| 1 | .47u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | Conn_01x02_Socket | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J10 |
| 1 | Conn_01x02_Socket | TerminalBlock_RND:TerminalBlock_RND_205-00287_1x02_P5.08mm_Horizontal | J1 |
| 1 | Conn_01x03_Socket | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J5 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J4 |
| 1 | Conn_01x08_Pin | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J3 |
| 1 | LTC4311 | agg:SC-70-6 | IC2 |
| 1 | MAX22530 | agg:SOIC-16-W | IC1 |
| 1 | MCP3202 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | Raspberry_Pi_2_3 | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J2 |
| 1 | TEL12-4811WI | Converter_DCDC:Converter_DCDC_TRACO_TEL12-xxxx_THT | U3 |

jackw01/ripplecounter
Sensorless brushed DC motor position control with Raspberry Pi Pico



gallicchio/AMOD-and-RFMOD
The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…


PiTracLM/PiTrac
Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)

michd/modular-synth
Building a hardware modular synthesizer, this is where I'll collect module schematics and hardware designs.

It measures 90 × 108 mm and has 2 copper layers, 1.6 mm thick.
106 parts, built around the TEL 12-4811WI, DRV8251ADDA, MCP3202-CI/P and 74LS32SC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the philcrump/g5500-pidrive repository on GitHub, at the commit this page was made from: the board is pcb/g5500-pidrive.kicad_pcb and its schematic pcb/g5500-pidrive.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).