

Control board
- Size
- 64 × 69.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 64
- Nets
- 59
- Pads
- 243
- Tracks, vias
- 480, 77
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 19 Jul 2026
- Updated
- 4 Nov 2026
Overview
Control board is an open-source printed circuit board by luckymuniza, from the luckymuniza/spinkovacka repository on GitHub. It is a 2-layer board of 64 × 69.9 mm with 64 parts on 59 nets, routed with 480 tracks and 77 vias.
It is built around the 74LVC2G17GW, ESP32-WROOM-32E and AP63203WU, with the DRV8251ADDA, SKRPABE010 and SS8050 among its other parts. Its parts include 23 resistors, 14 capacitors, 6 connectors, 4 ICs and 4 diodes. It belongs with the ESP32 boards of this library.
Main components
1074LVC2G17GW
SOT-363-40℃~+125℃ 1 1.65V~5.5V 10uA 2 24mA 24mA 5.4ns@3.3V,50pF 74LVC Schmitt trigger Unidirectional SOT-363 Buffers, Drivers, Receivers, Transceivers ROHSTECH PUBLICBuffers, Drivers, Receivers, TransceiversESP32-WROOM-32E
SMD,18x25.5mmSMD,18x25.5mm WiFi Modules ROHSEspressif SystemsWiFi ModulesAP63203WU
TSOT-23-6-40℃~+85℃@(TA) 1 1.1MHz 22uA 2A 3.3V 3.8V~32V Buck Built-in Fixed Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Hiccup current limiting、EMI optimization (spread spectrum) Step-down type Yes TSOT-23-6 DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersDRV8251ADDA
SOPowerPAD-8SOPowerPAD-8 Brushed DC Motor Drivers ROHSTexas InstrumentsBrushed DC Motor DriversSKRPABE010
SMD-4P,4.2x3.2mm-30℃~+85℃ 1.6N 100,000 cycles 16V 2.5mm 3.2mm 4.2mm 50mA J-Lead Oval button SPST-NO Surface Mount,Vertical SMD-4P,4.2x3.2mm Tactile Switches ROHSALPSALPINETactile SwitchesSS8050
SOT-323-55℃~+150℃ 1 NPN 1.5A 100MHz 100nA 200 25V 300mW 500mV 5V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)AOD4189
TO-252(DPAK)-55℃~+175℃ 1 P-Channel 1.7V 1.87nF 155pF 22mΩ 40A 40V 41nC@10V 62.5W TO-252(DPAK) MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsB3U-3000PM-B
SMD-25℃~+70℃ 0.7mm 1.62N 12V 3.2mm 3mm 50mA Round Button SMD(SMT) Tab SPST Surface Mount, Right Angle SMD Tactile Switches ROHSOmronTactile SwitchesBAV70
SOT-23-55℃~+150℃ 1 Pair Common Cathode 1.25V@150mA 2.5uA@70V 200mA 225mW 2A 6ns 70V SOT-23 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching DiodesBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
Parts
64| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_SMD:R_0805_2012Metric | R3, R8, R9, R10, R11, R12 |
| 6 | 47k | Resistor_SMD:R_0805_2012Metric | R16, R17, R18, R19, R20, R21 |
| 4 | 100n | Capacitor_SMD:C_1206_3216Metric | C3, C4, C8, C10 |
| 3 | 100k | Resistor_SMD:R_0805_2012Metric | R2, R4, R7 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3 |
| 2 | 10n | Capacitor_SMD:C_0805_2012Metric | C11, C13 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R22, R23 |
| 2 | 22u/16V | Capacitor_SMD:C_1206_3216Metric | C5, C6 |
| 2 | 470 | Resistor_SMD:R_0805_2012Metric | R14, R15 |
| 2 | SKRPABE010 | _my_switches:SW_TACT_ALPS_SKRPABE010 | SW2, SW3 |
| 2 | SS8050 | Package_TO_SOT_SMD:SOT-23 | Q3, Q4 |
| 2 | ~ | LED_SMD:LED_1206_3216Metric | LED1, LED2 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14 |
| 1 | 100n/50V | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | 10u/50V | Capacitor_SMD:C_1210_3225Metric | C7 |
| 1 | 15V | Diode_SMD:Nexperia_CFP3_SOD-123W | D1 |
| 1 | 1k1 | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 1k5 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 1u | Capacitor_SMD:C_1206_3216Metric | C9 |
| 1 | 2.2u/35V | Capacitor_SMD:C_1206_3216Metric | C12 |
| 1 | 24k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 47u/50V | Capacitor_SMD:CP_Elec_6.3x5.8 | C2 |
| 1 | 5k | Potentiometer_SMD:Potentiometer_Bourns_3314J_Vertical | RV1 |
| 1 | 6.8uH | Inductor_SMD:L_Panasonic_PCC-M0530M | L1 |
| 1 | 680 | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 74LVC2G17 | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | AOD4189 | Package_TO_SOT_SMD:TO-252-2 | Q1 |
| 1 | AP63203WU | Package_TO_SOT_SMD:TSOT-23-6 | U3 |
| 1 | B3U-3000PM-B | Button_Switch_SMD:SW_SPST_B3U-3000P-B | SW1 |
| 1 | BAV70 | Package_TO_SOT_SMD:SOT-23 | D4 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | DRV8251A | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.71x3.4mm_ThermalVias | U2 |
| 1 | ESP32-WROOM-32E | RF_Module:ESP32-WROOM-32E | U1 |
| 1 | Micro_SD_Card | _my_connectors:GCT_MEM2067-02-180-00-A_REVB | J6 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP1 |
| 1 | ~ | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J4 |
| 1 | ~ | Connector_JST:JST_VH_B2PS-VH_1x02_P3.96mm_Horizontal | J5 |
| 1 | ~ | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J2 |
| 1 | ~ | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | ~ | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J3 |
More from luckymuniza/spinkovacka
2- 2 layers64 × 69.9 mm

- 2 layers78 × 20 mm

Similar boards
- 2 layers100 × 100 mm

Openmower Brushed
gk977246/Openmower_Brushed
I have rebuilt a Bosch Indego800. It had no RPMSensor on the mowing motor, so i added magnet and hallsensor myself. It is easily possible, to convert any old mower with brushed motors, to openmower with RTK.
139 parts1 - 2 layers82 × 56 mm

Ripplecounter
jackw01/ripplecounter
Sensorless brushed DC motor position control with Raspberry Pi Pico
126 parts15 - 2 layers65 × 56 mm

- 2 layers90 × 108 mm

G5500-pidrive
philcrump/g5500-pidrive
Driving an AC Yaesu G-5500 Az+El with DC-source PWM from a Raspberry Pi.
106 partsMIT - 4 layers100 × 100 mm

Amod m
gallicchio/AMOD-and-RFMOD
The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…
207 parts - 4 layers57.8 × 80 mm

- 2 layers152.1 × 70.1 mm

- 8 layers34 × 54.8 mm

Questions
How big is the Control board PCB?
It measures 64 × 69.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Control board use?
64 parts, built around the 74LVC2G17GW, ESP32-WROOM-32E, AP63203WU and DRV8251ADDA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Control board KiCad files?
From the luckymuniza/spinkovacka repository on GitHub, at the commit this page was made from: the board is hw_v2.0/control_board/control_board.kicad_pcb and its schematic hw_v1.0/control_board/control_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Control board design in my own project?
Its repository states no licence, so its author keeps all rights: ask luckymuniza before reusing the design.