Electrical schematic and layout for capstone design project.
FYDP is an open-source printed circuit board by Michael-Done, from the Michael-Done/FYDP_ELEC repository on GitHub. It is a 2-layer board of 65 × 56 mm with 43 parts on 70 nets, routed with 238 tracks and 98 vias.
It is built around the ATTINY88-AU, DRV8251ADDA and VS-6TQ045S-M3. Its parts include 11 capacitors, 11 resistors, 5 connectors, 4 diodes and 3 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Electrical schematic and layout for capstone design project.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1K | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D2.5mm | TP1, TP2, TP4, TP5 |
| 3 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C1, C9, C11 |
| 3 | 220R | Resistor_SMD:R_0603_1608Metric | R9, R10, R11 |
| 3 | LED | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D3, D4 |
| 2 | 10n | Capacitor_SMD:C_0603_1608Metric | C6, C7 |
| 2 | 15k | Resistor_SMD:R_0805_2012Metric | R5, R6 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 220u | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C5, C8 |
| 2 | 47u | Capacitor_SMD:C_0805_2012Metric | C2, C10 |
| 1 | 22u | Inductor_SMD:L_12x12mm_H4.5mm | L1 |
| 1 | 680R | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 8.2k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | ATtiny88-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | DRV8251A | Package_SO:Texas_HSOP-8-1EP_3.9x4.9mm_P1.27mm | U3 |
| 1 | ISP Header | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | JST PH | Connector_JST:JST_PH_S6B-PH-SM4-TB_1x06-1MP_P2.00mm_Horizontal | J4 |
| 1 | JST PH | Connector_JST:JST_PH_S10B-PH-SM4-TB_1x10-1MP_P2.00mm_Horizontal | J5 |
| 1 | LM2679-5 | Package_TO_SOT_SMD:TO-263-7_TabPin4 | U2 |
| 1 | Molex Micro-Fit 2 Pin | Connector_Molex:Molex_Micro-Fit_3.0_43045-0200_2x01_P3.00mm_Horizontal | J1 |
| 1 | Raspberry_Pi_2_3 | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J3 |
| 1 | VS-6TQ045S-M3 | Package_TO_SOT_SMD:TO-263-2 | D1 |
The 39 most common of 43 parts.
mtthewwatts/12V5VBuckConverter
12V to 5V buck converter using LM2679, designed in KiCad 9. This was made for my MTE380 Course Project, to specifically fit my robot, but the physical board can be altered to fit other designs.
jackw01/ripplecounter
Sensorless brushed DC motor position control with Raspberry Pi Pico
philcrump/g5500-pidrive
Driving an AC Yaesu G-5500 Az+El with DC-source PWM from a Raspberry Pi.
gallicchio/AMOD-and-RFMOD
The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…
danheeks/vario
paragliding vario with arduino nano, piezo sounder, bmp180 altimeter, 4x Nimh batterys
SamWarmuth/SWSplitFlap
3D printable split flap display (software/pcb/STLs), for a more detailed split flap project see https://github.com/scottbez1/splitflap
It measures 65 × 56 mm and has 2 copper layers, 1.6 mm thick.
43 parts, built around the ATTINY88-AU, DRV8251ADDA and VS-6TQ045S-M3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Michael-Done/FYDP_ELEC repository on GitHub, at the commit this page was made from: the board is FYDP/FYDP.kicad_pcb and its schematic FYDP/FYDP.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Michael-Done before reusing the design.
