Skip to the content
1234567891011121314151617181920212223242526272829303132

ATTINY88-AU

Microchip TechnologyExtended

-40℃~+85℃ 1.8V~5.5V 10bit 12MHz 28 512Byte 64Byte 8 Bit 8KB AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHS

Part id
microchip/ATTINY88-AU
Category
Microcontrollers (MCU, MPU, SOC)
Package
TQFP-32(7x7)
Pins
32
In stock
587 at JLCPCB (C111451)
Used on
20 open-source boards

Overview

The ATTINY88-AU is a microcontroller made by Microchip Technology in a TQFP-32(7x7) package with 32 pins. -40℃~+85℃ 1.8V~5.5V 10bit 12MHz 28 512Byte 64Byte 8 Bit 8KB AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_Microchip_ATtiny:ATtiny88-A, from KiCad's library) and its footprint (Package_QFP:TQFP-32_7x7mm_P0.8mm, from KiCad's library), ready for a KiCad board. 587 are in stock at JLCPCB (part C111451). 20 open-source boards in 15 repositories on GitHub use it.

Symbol

1PD32PD43PA24VCC5GND6PA37PB68PB79PD510PD611PD712PB013PB114PB215PB316PB417PB518AVCC19PA020PC722PA123PC024PC125PC226PC327PC428PC529RESET/PC630PD031PD132PD2
MCU_Microchip_ATtiny:ATtiny88-AFrom KiCad's library

Footprint

1234567891011121314151617181920212223242526272829303132
Package_QFP:TQFP-32_7x7mm_P0.8mmFrom KiCad's library

From the datasheet

5
Supply, least
1.8 V · VCC, recommended operating, min · p. 1
Supply, most
5.5 V · VCC, recommended operating, max · p. 1
Works from
-40 °C · operating temperature, min · p. 1
Works up to
85 °C · operating temperature, max · p. 1
Takes asleep
100 nA · power-down mode at 1.8 V; headline, typical/max unspecified · p. 1

Pinout

32
The pins of the ATTINY88-AU
PinNameType
1PD3Input/output
2PD4Input/output
3PA2Input/output
4VCCPower in
5GNDPower in
6PA3Input/output
7PB6Input/output
8PB7Input/output
9PD5Input/output
10PD6Input/output
11PD7Input/output
12PB0Input/output
13PB1Input/output
14PB2Input/output
15PB3Input/output
16PB4Input/output
17PB5Input/output
18AVCCPower in
19PA0Input/output
20PC7Input/output
21GNDPassive
22PA1Input/output
23PC0Input/output
24PC1Input/output
25PC2Input/output
26PC3Input/output
27PC4Input/output
28PC5Input/output
29RESET/PC6Input/output
30PD0Input/output
31PD1Input/output
32PD2Input/output

Open-source boards using it

20See all 20
  • 2 layers47.9 × 49.6 mmBMP280Tiny, the printed circuit board in 3D

    BMP280Tiny

    danheeks/vario

    paragliding vario with arduino nano, piezo sounder, bmp180 altimeter, 4x Nimh batterys

    45 parts11
  • 2 layers100 × 99.9 mmPanelized, the printed circuit board in 3D

    Panelized

    SamWarmuth/SWSplitFlap

    3D printable split flap display (software/pcb/STLs), for a more detailed split flap project see https://github.com/scottbez1/splitflap

    144 parts4
  • 2 layers89.6 × 59.3 mmC4-blinkenrocket, the printed circuit board in 3D

    C4-blinkenrocket

    cccc/Blastrocket

    A Blinkenrocket adaption with c4 touch made with KiCAD

    26 parts1
  • 2 layers20.3 × 19.3 mmAttiny48, the printed circuit board in 3D

    Attiny48

    joshnuss/attiny48

    Devboard for ATtiny 48/88

    11 parts1
  • 2 layers97 × 23.7 mmHomegreen Node Basic, the printed circuit board in 3D

    Homegreen Node Basic

    pmalessa/homegreen-Node

    The system is based on an inexpensive node, which is able to control up to 3 pumps and can be powered by nearly any conventional powerbank.

    67 parts1
  • 2 layers304.3 × 274 mmRobotont electronics mainboard, the printed circuit board in 3D

    Robotont electronics mainboard

    robotont/robotont-electronics-mainboard

    Unified pcb design for the 3rd generation robotont robot.

    426 parts1
  • 2 layers299.3 × 93.1 mmHAT CM4 base, the printed circuit board in 3D

    HAT CM4 base

    ConnectBox/Circuit-Design

    Connectbox Circuit Design

    178 parts
  • 2 layers100 × 15 mmUniversal lights, the printed circuit board in 3D

    Universal lights

    FumBlau/universal_lights

    PCB and firmware for RGB and single color control based on attiny88

    27 partsGPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ATTINY88-AU?

Yes. The symbol is MCU_Microchip_ATtiny:ATtiny88-A and the footprint Package_QFP:TQFP-32_7x7mm_P0.8mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ATTINY88-AU?

TQFP-32(7x7), with 32 pins. Its footprint is drawn on this page.

Where is the ATTINY88-AU datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the ATTINY88-AU?

JLCPCB lists it as part C111451, with 587 in stock; the sellers' links on this page open their listings.

What can replace the ATTINY88-AU?

Parts like it in the library: the ATMEGA328P-AU by Microchip Technology, the ATMEGA48PA-AU by Microchip Technology, the ATMEGA328PB-AU by Microchip Technology and the ATMEGA88PA-AU by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ATTINY88-AU?

20 boards in 15 repositories on GitHub; the most starred are listed on this page, with their KiCad files.